camel-mllp-kafka-connector source configuration

When using camel-mllp-kafka-connector as source make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-mllp-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Source connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.mllp.CamelMllpSourceConnector

The camel-mllp source connector supports 32 options, which are listed below.

Name	Description	Default	Priority
camel.source.path.hostname	Hostname or IP for connection for the TCP connection. The default value is null, which means any local IP address	null	HIGH
camel.source.path.port	Port number for the TCP connection	null	HIGH
camel.source.endpoint.autoAck	Enable/Disable the automatic generation of a MLLP Acknowledgement MLLP Consumers only	true	MEDIUM
camel.source.endpoint.bufferWrites	Enable/Disable the buffering of HL7 payloads before writing to the socket.	false	LOW
camel.source.endpoint.hl7Headers	Enable/Disable the automatic generation of message headers from the HL7 Message MLLP Consumers only	true	MEDIUM
camel.source.endpoint.requireEndOfData	Enable/Disable strict compliance to the MLLP standard. The MLLP standard specifies START_OF_BLOCKhl7 payloadEND_OF_BLOCKEND_OF_DATA, however, some systems do not send the final END_OF_DATA byte. This setting controls whether or not the final END_OF_DATA byte is required or optional.	true	MEDIUM
camel.source.endpoint.stringPayload	Enable/Disable converting the payload to a String. If enabled, HL7 Payloads received from external systems will be validated converted to a String. If the charsetName property is set, that character set will be used for the conversion. If the charsetName property is not set, the value of MSH-18 will be used to determine th appropriate character set. If MSH-18 is not set, then the default ISO-8859-1 character set will be use.	true	MEDIUM
camel.source.endpoint.validatePayload	Enable/Disable the validation of HL7 Payloads If enabled, HL7 Payloads received from external systems will be validated (see Hl7Util.generateInvalidPayloadExceptionMessage for details on the validation). If and invalid payload is detected, a MllpInvalidMessageException (for consumers) or a MllpInvalidAcknowledgementException will be thrown.	false	MEDIUM
camel.source.endpoint.bridgeErrorHandler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to receive incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. If disabled, the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions by logging them at WARN or ERROR level and ignored.	true	MEDIUM
camel.source.endpoint.exceptionHandler	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.	null	MEDIUM
camel.source.endpoint.exchangePattern	Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]	"InOut"	MEDIUM
camel.source.endpoint.basicPropertyBinding	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.source.endpoint.synchronous	Sets whether synchronous processing should be strictly used (this component only supports synchronous operations).	true	MEDIUM
camel.source.endpoint.charsetName	Set the CamelCharsetName property on the exchange	null	MEDIUM
camel.source.endpoint.backlog	The maximum queue length for incoming connection indications (a request to connect) is set to the backlog parameter. If a connection indication arrives when the queue is full, the connection is refused.	"5"	MEDIUM
camel.source.endpoint.lenientBind	TCP Server Only - Allow the endpoint to start before the TCP ServerSocket is bound. In some environments, it may be desirable to allow the endpoint to start before the TCP ServerSocket is bound.	false	MEDIUM
camel.source.endpoint.maxConcurrentConsumers	The maximum number of concurrent MLLP Consumer connections that will be allowed. If a new connection is received and the maximum is number are already established, the new connection will be reset immediately.	5	MEDIUM
camel.source.endpoint.receiveBufferSize	Sets the SO_RCVBUF option to the specified value (in bytes)	"8192"	MEDIUM
camel.source.endpoint.reuseAddress	Enable/disable the SO_REUSEADDR socket option.	"false"	MEDIUM
camel.source.endpoint.sendBufferSize	Sets the SO_SNDBUF option to the specified value (in bytes)	"8192"	MEDIUM
camel.source.endpoint.acceptTimeout	Timeout (in milliseconds) while waiting for a TCP connection TCP Server Only	60000	MEDIUM
camel.source.endpoint.bindRetryInterval	TCP Server Only - The number of milliseconds to wait between bind attempts	5000	MEDIUM
camel.source.endpoint.bindTimeout	TCP Server Only - The number of milliseconds to retry binding to a server port	30000	MEDIUM
camel.source.endpoint.idleTimeout	The approximate idle time allowed before the Client TCP Connection will be reset. A null value or a value less than or equal to zero will disable the idle timeout.	null	MEDIUM
camel.source.endpoint.maxReceiveTimeouts	The maximum number of timeouts (specified by receiveTimeout) allowed before the TCP Connection will be reset.	null	LOW
camel.source.endpoint.readTimeout	The SO_TIMEOUT value (in milliseconds) used after the start of an MLLP frame has been received	5000	MEDIUM
camel.source.endpoint.receiveTimeout	The SO_TIMEOUT value (in milliseconds) used when waiting for the start of an MLLP frame	15000	MEDIUM
camel.component.mllp.bridgeErrorHandler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	MEDIUM
camel.component.mllp.basicPropertyBinding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.component.mllp.defaultCharset	Set the default character set to use for byte to/from String conversions.	"ISO-8859-1"	MEDIUM
camel.component.mllp.logPhi	Set the component to log PHI data.	"true"	MEDIUM
camel.component.mllp.logPhiMaxBytes	Set the maximum number of bytes of PHI that will be logged in a log entry.	"5120"	MEDIUM

Name

Description

Default

Priority

camel.source.path.hostname

Hostname or IP for connection for the TCP connection. The default value is null, which means any local IP address

null

HIGH

camel.source.path.port

Port number for the TCP connection

null

HIGH

camel.source.endpoint.autoAck

Enable/Disable the automatic generation of a MLLP Acknowledgement MLLP Consumers only

true

MEDIUM

camel.source.endpoint.bufferWrites

Enable/Disable the buffering of HL7 payloads before writing to the socket.

false

LOW

camel.source.endpoint.hl7Headers

Enable/Disable the automatic generation of message headers from the HL7 Message MLLP Consumers only

true

MEDIUM

camel.source.endpoint.requireEndOfData

Enable/Disable strict compliance to the MLLP standard. The MLLP standard specifies START_OF_BLOCKhl7 payloadEND_OF_BLOCKEND_OF_DATA, however, some systems do not send the final END_OF_DATA byte. This setting controls whether or not the final END_OF_DATA byte is required or optional.

true

MEDIUM

camel.source.endpoint.stringPayload

Enable/Disable converting the payload to a String. If enabled, HL7 Payloads received from external systems will be validated converted to a String. If the charsetName property is set, that character set will be used for the conversion. If the charsetName property is not set, the value of MSH-18 will be used to determine th appropriate character set. If MSH-18 is not set, then the default ISO-8859-1 character set will be use.

true

MEDIUM

camel.source.endpoint.validatePayload

Enable/Disable the validation of HL7 Payloads If enabled, HL7 Payloads received from external systems will be validated (see Hl7Util.generateInvalidPayloadExceptionMessage for details on the validation). If and invalid payload is detected, a MllpInvalidMessageException (for consumers) or a MllpInvalidAcknowledgementException will be thrown.

false

MEDIUM

camel.source.endpoint.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to receive incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. If disabled, the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions by logging them at WARN or ERROR level and ignored.

true

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

null

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]

"InOut"

MEDIUM

camel.source.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.source.endpoint.synchronous

Sets whether synchronous processing should be strictly used (this component only supports synchronous operations).

true

MEDIUM

camel.source.endpoint.charsetName

Set the CamelCharsetName property on the exchange

null

MEDIUM

camel.source.endpoint.backlog

The maximum queue length for incoming connection indications (a request to connect) is set to the backlog parameter. If a connection indication arrives when the queue is full, the connection is refused.

"5"

MEDIUM

camel.source.endpoint.lenientBind

TCP Server Only - Allow the endpoint to start before the TCP ServerSocket is bound. In some environments, it may be desirable to allow the endpoint to start before the TCP ServerSocket is bound.

false

MEDIUM

camel.source.endpoint.maxConcurrentConsumers

The maximum number of concurrent MLLP Consumer connections that will be allowed. If a new connection is received and the maximum is number are already established, the new connection will be reset immediately.

MEDIUM

camel.source.endpoint.receiveBufferSize

Sets the SO_RCVBUF option to the specified value (in bytes)

"8192"

MEDIUM

camel.source.endpoint.reuseAddress

Enable/disable the SO_REUSEADDR socket option.

"false"

MEDIUM

camel.source.endpoint.sendBufferSize

Sets the SO_SNDBUF option to the specified value (in bytes)

"8192"

MEDIUM

camel.source.endpoint.acceptTimeout

Timeout (in milliseconds) while waiting for a TCP connection TCP Server Only

60000

MEDIUM

camel.source.endpoint.bindRetryInterval

TCP Server Only - The number of milliseconds to wait between bind attempts

5000

MEDIUM

camel.source.endpoint.bindTimeout

TCP Server Only - The number of milliseconds to retry binding to a server port

30000

MEDIUM

camel.source.endpoint.idleTimeout

The approximate idle time allowed before the Client TCP Connection will be reset. A null value or a value less than or equal to zero will disable the idle timeout.

null

MEDIUM

camel.source.endpoint.maxReceiveTimeouts

The maximum number of timeouts (specified by receiveTimeout) allowed before the TCP Connection will be reset.

null

LOW

camel.source.endpoint.readTimeout

The SO_TIMEOUT value (in milliseconds) used after the start of an MLLP frame has been received

5000

MEDIUM

camel.source.endpoint.receiveTimeout

The SO_TIMEOUT value (in milliseconds) used when waiting for the start of an MLLP frame

15000

MEDIUM

camel.component.mllp.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.component.mllp.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.component.mllp.defaultCharset

Set the default character set to use for byte to/from String conversions.

"ISO-8859-1"

MEDIUM

camel.component.mllp.logPhi

Set the component to log PHI data.

"true"

MEDIUM

camel.component.mllp.logPhiMaxBytes

Set the maximum number of bytes of PHI that will be logged in a log entry.

"5120"

MEDIUM