camel-rabbitmq-kafka-connector source configuration

When using camel-rabbitmq-kafka-connector as source make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-rabbitmq-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Source connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.rabbitmq.CamelRabbitmqSourceConnector

The camel-rabbitmq source connector supports 97 options, which are listed below.

Name	Description	Default	Priority
camel.source.path.exchangeName	The exchange name determines the exchange to which the produced messages will be sent to. In the case of consumers, the exchange name determines the exchange the queue will be bound to.	null	HIGH
camel.source.endpoint.addresses	If this option is set, camel-rabbitmq will try to create connection based on the setting of option addresses. The addresses value is a string which looks like server1:12345, server2:12345	null	MEDIUM
camel.source.endpoint.autoDelete	If it is true, the exchange will be deleted when it is no longer in use	true	MEDIUM
camel.source.endpoint.automaticRecoveryEnabled	Enables connection automatic recovery (uses connection implementation that performs automatic recovery when existing connection has failures)	"true"	MEDIUM
camel.source.endpoint.connectionFactory	To use a custom RabbitMQ connection factory. When this option is set, all connection options (connectionTimeout, requestedChannelMax…) set on URI are not used	null	MEDIUM
camel.source.endpoint.deadLetterExchange	The name of the dead letter exchange	null	MEDIUM
camel.source.endpoint.deadLetterExchangeType	The type of the dead letter exchange One of: [direct] [fanout] [headers] [topic]	"direct"	MEDIUM
camel.source.endpoint.deadLetterQueue	The name of the dead letter queue	null	MEDIUM
camel.source.endpoint.deadLetterRoutingKey	The routing key for the dead letter exchange	null	MEDIUM
camel.source.endpoint.declare	If the option is true, camel declare the exchange and queue name and bind them together. If the option is false, camel won’t declare the exchange and queue name on the server.	true	MEDIUM
camel.source.endpoint.durable	If we are declaring a durable exchange (the exchange will survive a server restart)	true	MEDIUM
camel.source.endpoint.exchangeType	The exchange type such as direct or topic. One of: [direct] [fanout] [headers] [topic]	"direct"	MEDIUM
camel.source.endpoint.exclusive	Exclusive queues may only be accessed by the current connection, and are deleted when that connection closes.	false	MEDIUM
camel.source.endpoint.hostname	The hostname of the running rabbitmq instance or cluster.	null	MEDIUM
camel.source.endpoint.passive	Passive queues depend on the queue already to be available at RabbitMQ.	false	MEDIUM
camel.source.endpoint.portNumber	Port number for the host with the running rabbitmq instance or cluster. Default value is 5672.	null	MEDIUM
camel.source.endpoint.queue	The queue to receive messages from	null	MEDIUM
camel.source.endpoint.routingKey	The routing key to use when binding a consumer queue to the exchange. For producer routing keys, you set the header rabbitmq.ROUTING_KEY.	null	MEDIUM
camel.source.endpoint.skipExchangeDeclare	This can be used if we need to declare the queue but not the exchange	false	MEDIUM
camel.source.endpoint.skipQueueBind	If true the queue will not be bound to the exchange after declaring it	false	MEDIUM
camel.source.endpoint.skipQueueDeclare	If true the producer will not declare and bind a queue. This can be used for directing messages via an existing routing key.	false	MEDIUM
camel.source.endpoint.vhost	The vhost for the channel	"/"	MEDIUM
camel.source.endpoint.autoAck	If messages should be auto acknowledged	true	MEDIUM
camel.source.endpoint.bridgeErrorHandler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	MEDIUM
camel.source.endpoint.concurrentConsumers	Number of concurrent consumers when consuming from broker. (eg similar as to the same option for the JMS component).	1	MEDIUM
camel.source.endpoint.consumerTag	Specify a client-generated consumer tag to establish context when invoking the consume operation	null	MEDIUM
camel.source.endpoint.exclusiveConsumer	Request exclusive access to the queue (meaning only this consumer can access the queue). This is useful when you want a long-lived shared queue to be temporarily accessible by just one consumer.	false	MEDIUM
camel.source.endpoint.prefetchCount	The maximum number of messages that the server will deliver, 0 if unlimited. You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time	null	MEDIUM
camel.source.endpoint.prefetchEnabled	Enables the quality of service on the RabbitMQConsumer side. You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time	false	MEDIUM
camel.source.endpoint.prefetchGlobal	If the settings should be applied to the entire channel rather than each consumer You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time	false	MEDIUM
camel.source.endpoint.prefetchSize	The maximum amount of content (measured in octets) that the server will deliver, 0 if unlimited. You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time	null	MEDIUM
camel.source.endpoint.exceptionHandler	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.	null	MEDIUM
camel.source.endpoint.exchangePattern	Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]	null	MEDIUM
camel.source.endpoint.threadPoolSize	The consumer uses a Thread Pool Executor with a fixed number of threads. This setting allows you to set that number of threads.	10	MEDIUM
camel.source.endpoint.args	Specify arguments for configuring the different RabbitMQ concepts, a different prefix is required for each: Exchange: arg.exchange. Queue: arg.queue. Binding: arg.binding. For example to declare a queue with message ttl argument: http://localhost:5672/exchange/queueargs=arg.queue.x-message-ttl=60000	null	MEDIUM
camel.source.endpoint.basicPropertyBinding	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.source.endpoint.clientProperties	Connection client properties (client info used in negotiating with the server)	null	MEDIUM
camel.source.endpoint.connectionFactoryException Handler	Custom rabbitmq ExceptionHandler for ConnectionFactory	null	MEDIUM
camel.source.endpoint.connectionTimeout	Connection timeout	60000	MEDIUM
camel.source.endpoint.networkRecoveryInterval	Network recovery interval in milliseconds (interval used when recovering from network failure)	"5000"	MEDIUM
camel.source.endpoint.requestedChannelMax	Connection requested channel max (max number of channels offered)	2047	MEDIUM
camel.source.endpoint.requestedFrameMax	Connection requested frame max (max size of frame offered)	0	MEDIUM
camel.source.endpoint.requestedHeartbeat	Connection requested heartbeat (heart-beat in seconds offered)	60	MEDIUM
camel.source.endpoint.requestTimeout	Set timeout for waiting for a reply when using the InOut Exchange Pattern (in milliseconds)	20000L	MEDIUM
camel.source.endpoint.requestTimeoutChecker Interval	Set requestTimeoutCheckerInterval for inOut exchange	1000L	MEDIUM
camel.source.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	MEDIUM
camel.source.endpoint.topologyRecoveryEnabled	Enables connection topology recovery (should topology recovery be performed)	null	MEDIUM
camel.source.endpoint.transferException	When true and an inOut Exchange failed on the consumer side send the caused Exception back in the response	false	MEDIUM
camel.source.endpoint.allowMessageBody Serialization	Whether to allow Java serialization of the message body or not. If this value is true, the message body will be serialized on the producer side using Java serialization, if no type converter can handle the message body. On the consumer side, it will deserialize the message body if this value is true and the message contains a CamelSerialize header. Setting this value to true may introduce a security vulnerability as it allows an attacker to attempt to deserialize to a gadget object which could result in a RCE or other security vulnerability.	false	MEDIUM
camel.source.endpoint.password	Password for authenticated access	"guest"	MEDIUM
camel.source.endpoint.sslProtocol	Enables SSL on connection, accepted value are true, TLS and 'SSLv3	null	MEDIUM
camel.source.endpoint.trustManager	Configure SSL trust manager, SSL should be enabled for this option to be effective	null	MEDIUM
camel.source.endpoint.username	Username in case of authenticated access	"guest"	MEDIUM
camel.component.rabbitmq.addresses	If this option is set, camel-rabbitmq will try to create connection based on the setting of option addresses. The addresses value is a string which looks like server1:12345, server2:12345	null	MEDIUM
camel.component.rabbitmq.autoDelete	If it is true, the exchange will be deleted when it is no longer in use	true	MEDIUM
camel.component.rabbitmq.connectionFactory	To use a custom RabbitMQ connection factory. When this option is set, all connection options (connectionTimeout, requestedChannelMax…) set on URI are not used	null	MEDIUM
camel.component.rabbitmq.deadLetterExchange	The name of the dead letter exchange	null	MEDIUM
camel.component.rabbitmq.deadLetterExchangeType	The type of the dead letter exchange One of: [direct] [fanout] [headers] [topic]	"direct"	MEDIUM
camel.component.rabbitmq.deadLetterQueue	The name of the dead letter queue	null	MEDIUM
camel.component.rabbitmq.deadLetterRoutingKey	The routing key for the dead letter exchange	null	MEDIUM
camel.component.rabbitmq.declare	If the option is true, camel declare the exchange and queue name and bind them together. If the option is false, camel won’t declare the exchange and queue name on the server.	true	MEDIUM
camel.component.rabbitmq.durable	If we are declaring a durable exchange (the exchange will survive a server restart)	true	MEDIUM
camel.component.rabbitmq.exclusive	Exclusive queues may only be accessed by the current connection, and are deleted when that connection closes.	false	MEDIUM
camel.component.rabbitmq.hostname	The hostname of the running RabbitMQ instance or cluster.	null	MEDIUM
camel.component.rabbitmq.passive	Passive queues depend on the queue already to be available at RabbitMQ.	false	MEDIUM
camel.component.rabbitmq.portNumber	Port number for the host with the running rabbitmq instance or cluster.	5672	MEDIUM
camel.component.rabbitmq.skipExchangeDeclare	This can be used if we need to declare the queue but not the exchange	false	MEDIUM
camel.component.rabbitmq.skipQueueBind	If true the queue will not be bound to the exchange after declaring it	false	MEDIUM
camel.component.rabbitmq.skipQueueDeclare	If true the producer will not declare and bind a queue. This can be used for directing messages via an existing routing key.	false	MEDIUM
camel.component.rabbitmq.vhost	The vhost for the channel	"/"	MEDIUM
camel.component.rabbitmq.autoAck	If messages should be auto acknowledged	true	MEDIUM
camel.component.rabbitmq.bridgeErrorHandler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	MEDIUM
camel.component.rabbitmq.exclusiveConsumer	Request exclusive access to the queue (meaning only this consumer can access the queue). This is useful when you want a long-lived shared queue to be temporarily accessible by just one consumer.	false	MEDIUM
camel.component.rabbitmq.prefetchCount	The maximum number of messages that the server will deliver, 0 if unlimited. You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time	null	MEDIUM
camel.component.rabbitmq.prefetchEnabled	Enables the quality of service on the RabbitMQConsumer side. You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time	false	MEDIUM
camel.component.rabbitmq.prefetchGlobal	If the settings should be applied to the entire channel rather than each consumer You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time	false	MEDIUM
camel.component.rabbitmq.prefetchSize	The maximum amount of content (measured in octets) that the server will deliver, 0 if unlimited. You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time	null	MEDIUM
camel.component.rabbitmq.threadPoolSize	The consumer uses a Thread Pool Executor with a fixed number of threads. This setting allows you to set that number of threads.	10	MEDIUM
camel.component.rabbitmq.args	Specify arguments for configuring the different RabbitMQ concepts, a different prefix is required for each: Exchange: arg.exchange. Queue: arg.queue. Binding: arg.binding. For example to declare a queue with message ttl argument: http://localhost:5672/exchange/queueargs=arg.queue.x-message-ttl=60000	null	MEDIUM
camel.component.rabbitmq.autoDetectConnection Factory	Whether to auto-detect looking up RabbitMQ connection factory from the registry. When enabled and a single instance of the connection factory is found then it will be used. An explicit connection factory can be configured on the component or endpoint level which takes precedence.	true	MEDIUM
camel.component.rabbitmq.automaticRecoveryEnabled	Enables connection automatic recovery (uses connection implementation that performs automatic recovery when connection shutdown is not initiated by the application)	null	MEDIUM
camel.component.rabbitmq.basicPropertyBinding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.component.rabbitmq.clientProperties	Connection client properties (client info used in negotiating with the server)	null	MEDIUM
camel.component.rabbitmq.connectionFactory ExceptionHandler	Custom rabbitmq ExceptionHandler for ConnectionFactory	null	MEDIUM
camel.component.rabbitmq.connectionTimeout	Connection timeout	60000	MEDIUM
camel.component.rabbitmq.networkRecoveryInterval	Network recovery interval in milliseconds (interval used when recovering from network failure)	"5000"	MEDIUM
camel.component.rabbitmq.requestedChannelMax	Connection requested channel max (max number of channels offered)	2047	MEDIUM
camel.component.rabbitmq.requestedFrameMax	Connection requested frame max (max size of frame offered)	0	MEDIUM
camel.component.rabbitmq.requestedHeartbeat	Connection requested heartbeat (heart-beat in seconds offered)	60	MEDIUM
camel.component.rabbitmq.requestTimeout	Set timeout for waiting for a reply when using the InOut Exchange Pattern (in milliseconds)	20000L	MEDIUM
camel.component.rabbitmq.requestTimeoutChecker Interval	Set requestTimeoutCheckerInterval for inOut exchange	1000L	MEDIUM
camel.component.rabbitmq.topologyRecoveryEnabled	Enables connection topology recovery (should topology recovery be performed)	null	MEDIUM
camel.component.rabbitmq.transferException	When true and an inOut Exchange failed on the consumer side send the caused Exception back in the response	false	MEDIUM
camel.component.rabbitmq.password	Password for authenticated access	"guest"	MEDIUM
camel.component.rabbitmq.sslProtocol	Enables SSL on connection, accepted value are true, TLS and 'SSLv3	null	MEDIUM
camel.component.rabbitmq.trustManager	Configure SSL trust manager, SSL should be enabled for this option to be effective	null	MEDIUM
camel.component.rabbitmq.username	Username in case of authenticated access	"guest"	MEDIUM

Name

Description

Default

Priority

camel.source.path.exchangeName

The exchange name determines the exchange to which the produced messages will be sent to. In the case of consumers, the exchange name determines the exchange the queue will be bound to.

null

HIGH

camel.source.endpoint.addresses

If this option is set, camel-rabbitmq will try to create connection based on the setting of option addresses. The addresses value is a string which looks like server1:12345, server2:12345

null

MEDIUM

camel.source.endpoint.autoDelete

If it is true, the exchange will be deleted when it is no longer in use

true

MEDIUM

camel.source.endpoint.automaticRecoveryEnabled

Enables connection automatic recovery (uses connection implementation that performs automatic recovery when existing connection has failures)

"true"

MEDIUM

camel.source.endpoint.connectionFactory

To use a custom RabbitMQ connection factory. When this option is set, all connection options (connectionTimeout, requestedChannelMax…) set on URI are not used

null

MEDIUM

camel.source.endpoint.deadLetterExchange

The name of the dead letter exchange

null

MEDIUM

camel.source.endpoint.deadLetterExchangeType

The type of the dead letter exchange One of: [direct] [fanout] [headers] [topic]

"direct"

MEDIUM

camel.source.endpoint.deadLetterQueue

The name of the dead letter queue

null

MEDIUM

camel.source.endpoint.deadLetterRoutingKey

The routing key for the dead letter exchange

null

MEDIUM

camel.source.endpoint.declare

If the option is true, camel declare the exchange and queue name and bind them together. If the option is false, camel won’t declare the exchange and queue name on the server.

true

MEDIUM

camel.source.endpoint.durable

If we are declaring a durable exchange (the exchange will survive a server restart)

true

MEDIUM

camel.source.endpoint.exchangeType

The exchange type such as direct or topic. One of: [direct] [fanout] [headers] [topic]

"direct"

MEDIUM

camel.source.endpoint.exclusive

Exclusive queues may only be accessed by the current connection, and are deleted when that connection closes.

false

MEDIUM

camel.source.endpoint.hostname

The hostname of the running rabbitmq instance or cluster.

null

MEDIUM

camel.source.endpoint.passive

Passive queues depend on the queue already to be available at RabbitMQ.

false

MEDIUM

camel.source.endpoint.portNumber

Port number for the host with the running rabbitmq instance or cluster. Default value is 5672.

null

MEDIUM

camel.source.endpoint.queue

The queue to receive messages from

null

MEDIUM

camel.source.endpoint.routingKey

The routing key to use when binding a consumer queue to the exchange. For producer routing keys, you set the header rabbitmq.ROUTING_KEY.

null

MEDIUM

camel.source.endpoint.skipExchangeDeclare

This can be used if we need to declare the queue but not the exchange

false

MEDIUM

camel.source.endpoint.skipQueueBind

If true the queue will not be bound to the exchange after declaring it

false

MEDIUM

camel.source.endpoint.skipQueueDeclare

If true the producer will not declare and bind a queue. This can be used for directing messages via an existing routing key.

false

MEDIUM

camel.source.endpoint.vhost

The vhost for the channel

"/"

MEDIUM

camel.source.endpoint.autoAck

If messages should be auto acknowledged

true

MEDIUM

camel.source.endpoint.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.source.endpoint.concurrentConsumers

Number of concurrent consumers when consuming from broker. (eg similar as to the same option for the JMS component).

MEDIUM

camel.source.endpoint.consumerTag

Specify a client-generated consumer tag to establish context when invoking the consume operation

null

MEDIUM

camel.source.endpoint.exclusiveConsumer

Request exclusive access to the queue (meaning only this consumer can access the queue). This is useful when you want a long-lived shared queue to be temporarily accessible by just one consumer.

false

MEDIUM

camel.source.endpoint.prefetchCount

The maximum number of messages that the server will deliver, 0 if unlimited. You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time

null

MEDIUM

camel.source.endpoint.prefetchEnabled

Enables the quality of service on the RabbitMQConsumer side. You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time

false

MEDIUM

camel.source.endpoint.prefetchGlobal

If the settings should be applied to the entire channel rather than each consumer You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time

false

MEDIUM

camel.source.endpoint.prefetchSize

The maximum amount of content (measured in octets) that the server will deliver, 0 if unlimited. You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time

null

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

null

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]

null

MEDIUM

camel.source.endpoint.threadPoolSize

The consumer uses a Thread Pool Executor with a fixed number of threads. This setting allows you to set that number of threads.

MEDIUM

camel.source.endpoint.args

Specify arguments for configuring the different RabbitMQ concepts, a different prefix is required for each: Exchange: arg.exchange. Queue: arg.queue. Binding: arg.binding. For example to declare a queue with message ttl argument: http://localhost:5672/exchange/queueargs=arg.queue.x-message-ttl=60000

null

MEDIUM

camel.source.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.source.endpoint.clientProperties

Connection client properties (client info used in negotiating with the server)

null

MEDIUM

camel.source.endpoint.connectionFactoryException Handler

Custom rabbitmq ExceptionHandler for ConnectionFactory

null

MEDIUM

camel.source.endpoint.connectionTimeout

Connection timeout

60000

MEDIUM

camel.source.endpoint.networkRecoveryInterval

Network recovery interval in milliseconds (interval used when recovering from network failure)

"5000"

MEDIUM

camel.source.endpoint.requestedChannelMax

Connection requested channel max (max number of channels offered)

2047

MEDIUM

camel.source.endpoint.requestedFrameMax

Connection requested frame max (max size of frame offered)

MEDIUM

camel.source.endpoint.requestedHeartbeat

Connection requested heartbeat (heart-beat in seconds offered)

MEDIUM

camel.source.endpoint.requestTimeout

Set timeout for waiting for a reply when using the InOut Exchange Pattern (in milliseconds)

20000L

MEDIUM

camel.source.endpoint.requestTimeoutChecker Interval

Set requestTimeoutCheckerInterval for inOut exchange

1000L

MEDIUM

camel.source.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.source.endpoint.topologyRecoveryEnabled

Enables connection topology recovery (should topology recovery be performed)

null

MEDIUM

camel.source.endpoint.transferException

When true and an inOut Exchange failed on the consumer side send the caused Exception back in the response

false

MEDIUM

camel.source.endpoint.allowMessageBody Serialization

Whether to allow Java serialization of the message body or not. If this value is true, the message body will be serialized on the producer side using Java serialization, if no type converter can handle the message body. On the consumer side, it will deserialize the message body if this value is true and the message contains a CamelSerialize header. Setting this value to true may introduce a security vulnerability as it allows an attacker to attempt to deserialize to a gadget object which could result in a RCE or other security vulnerability.

false

MEDIUM

camel.source.endpoint.password

Password for authenticated access

"guest"

MEDIUM

camel.source.endpoint.sslProtocol

Enables SSL on connection, accepted value are true, TLS and 'SSLv3

null

MEDIUM

camel.source.endpoint.trustManager

Configure SSL trust manager, SSL should be enabled for this option to be effective

null

MEDIUM

camel.source.endpoint.username

Username in case of authenticated access

"guest"

MEDIUM

camel.component.rabbitmq.addresses

If this option is set, camel-rabbitmq will try to create connection based on the setting of option addresses. The addresses value is a string which looks like server1:12345, server2:12345

null

MEDIUM

camel.component.rabbitmq.autoDelete

If it is true, the exchange will be deleted when it is no longer in use

true

MEDIUM

camel.component.rabbitmq.connectionFactory

To use a custom RabbitMQ connection factory. When this option is set, all connection options (connectionTimeout, requestedChannelMax…) set on URI are not used

null

MEDIUM

camel.component.rabbitmq.deadLetterExchange

The name of the dead letter exchange

null

MEDIUM

camel.component.rabbitmq.deadLetterExchangeType

The type of the dead letter exchange One of: [direct] [fanout] [headers] [topic]

"direct"

MEDIUM

camel.component.rabbitmq.deadLetterQueue

The name of the dead letter queue

null

MEDIUM

camel.component.rabbitmq.deadLetterRoutingKey

The routing key for the dead letter exchange

null

MEDIUM

camel.component.rabbitmq.declare

If the option is true, camel declare the exchange and queue name and bind them together. If the option is false, camel won’t declare the exchange and queue name on the server.

true

MEDIUM

camel.component.rabbitmq.durable

If we are declaring a durable exchange (the exchange will survive a server restart)

true

MEDIUM

camel.component.rabbitmq.exclusive

Exclusive queues may only be accessed by the current connection, and are deleted when that connection closes.

false

MEDIUM

camel.component.rabbitmq.hostname

The hostname of the running RabbitMQ instance or cluster.

null

MEDIUM

camel.component.rabbitmq.passive

Passive queues depend on the queue already to be available at RabbitMQ.

false

MEDIUM

camel.component.rabbitmq.portNumber

Port number for the host with the running rabbitmq instance or cluster.

5672

MEDIUM

camel.component.rabbitmq.skipExchangeDeclare

This can be used if we need to declare the queue but not the exchange

false

MEDIUM

camel.component.rabbitmq.skipQueueBind

If true the queue will not be bound to the exchange after declaring it

false

MEDIUM

camel.component.rabbitmq.skipQueueDeclare

If true the producer will not declare and bind a queue. This can be used for directing messages via an existing routing key.

false

MEDIUM

camel.component.rabbitmq.vhost

The vhost for the channel

"/"

MEDIUM

camel.component.rabbitmq.autoAck

If messages should be auto acknowledged

true

MEDIUM

camel.component.rabbitmq.bridgeErrorHandler

false

MEDIUM

camel.component.rabbitmq.exclusiveConsumer

Request exclusive access to the queue (meaning only this consumer can access the queue). This is useful when you want a long-lived shared queue to be temporarily accessible by just one consumer.

false

MEDIUM

camel.component.rabbitmq.prefetchCount

The maximum number of messages that the server will deliver, 0 if unlimited. You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time

null

MEDIUM

camel.component.rabbitmq.prefetchEnabled

Enables the quality of service on the RabbitMQConsumer side. You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time

false

MEDIUM

camel.component.rabbitmq.prefetchGlobal

If the settings should be applied to the entire channel rather than each consumer You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time

false

MEDIUM

camel.component.rabbitmq.prefetchSize

The maximum amount of content (measured in octets) that the server will deliver, 0 if unlimited. You need to specify the option of prefetchSize, prefetchCount, prefetchGlobal at the same time

null

MEDIUM

camel.component.rabbitmq.threadPoolSize

The consumer uses a Thread Pool Executor with a fixed number of threads. This setting allows you to set that number of threads.

MEDIUM

camel.component.rabbitmq.args

null

MEDIUM

camel.component.rabbitmq.autoDetectConnection Factory

Whether to auto-detect looking up RabbitMQ connection factory from the registry. When enabled and a single instance of the connection factory is found then it will be used. An explicit connection factory can be configured on the component or endpoint level which takes precedence.

true

MEDIUM

camel.component.rabbitmq.automaticRecoveryEnabled

Enables connection automatic recovery (uses connection implementation that performs automatic recovery when connection shutdown is not initiated by the application)

null

MEDIUM

camel.component.rabbitmq.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.component.rabbitmq.clientProperties

Connection client properties (client info used in negotiating with the server)

null

MEDIUM

camel.component.rabbitmq.connectionFactory ExceptionHandler

Custom rabbitmq ExceptionHandler for ConnectionFactory

null

MEDIUM

camel.component.rabbitmq.connectionTimeout

Connection timeout

60000

MEDIUM

camel.component.rabbitmq.networkRecoveryInterval

Network recovery interval in milliseconds (interval used when recovering from network failure)

"5000"

MEDIUM

camel.component.rabbitmq.requestedChannelMax

Connection requested channel max (max number of channels offered)

2047

MEDIUM

camel.component.rabbitmq.requestedFrameMax

Connection requested frame max (max size of frame offered)

MEDIUM

camel.component.rabbitmq.requestedHeartbeat

Connection requested heartbeat (heart-beat in seconds offered)

MEDIUM

camel.component.rabbitmq.requestTimeout

Set timeout for waiting for a reply when using the InOut Exchange Pattern (in milliseconds)

20000L

MEDIUM

camel.component.rabbitmq.requestTimeoutChecker Interval

Set requestTimeoutCheckerInterval for inOut exchange

1000L

MEDIUM

camel.component.rabbitmq.topologyRecoveryEnabled

Enables connection topology recovery (should topology recovery be performed)

null

MEDIUM

camel.component.rabbitmq.transferException

When true and an inOut Exchange failed on the consumer side send the caused Exception back in the response

false

MEDIUM

camel.component.rabbitmq.password

Password for authenticated access

"guest"

MEDIUM

camel.component.rabbitmq.sslProtocol

Enables SSL on connection, accepted value are true, TLS and 'SSLv3

null

MEDIUM

camel.component.rabbitmq.trustManager

Configure SSL trust manager, SSL should be enabled for this option to be effective

null

MEDIUM

camel.component.rabbitmq.username

Username in case of authenticated access

"guest"

MEDIUM