camel-rest-swagger-kafka-connector sink configuration

When using camel-rest-swagger-kafka-connector as sink make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-rest-swagger-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Sink connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.restswagger.CamelRestswaggerSinkConnector

The camel-rest-swagger sink connector supports 21 options, which are listed below.

Name	Description	Default	Priority
camel.sink.path.specificationUri	Path to the Swagger specification file. The scheme, host base path are taken from this specification, but these can be overridden with properties on the component or endpoint level. If not given the component tries to load swagger.json resource from the classpath. Note that the host defined on the component and endpoint of this Component should contain the scheme, hostname and optionally the port in the URI syntax (i.e. http://api.example.com:8080). Overrides component configuration. The Swagger specification can be loaded from different sources by prefixing with file: classpath: http: https:. Support for https is limited to using the JDK installed UrlHandler, and as such it can be cumbersome to setup TLS/SSL certificates for https (such as setting a number of javax.net.ssl JVM system properties). How to do that consult the JDK documentation for UrlHandler. Default value notice: By default loads swagger.json file	"swagger.json"	MEDIUM
camel.sink.path.operationId	ID of the operation from the Swagger specification.	null	HIGH
camel.sink.endpoint.basePath	API basePath, for example /v2. Default is unset, if set overrides the value present in Swagger specification and in the component configuration.	null	MEDIUM
camel.sink.endpoint.componentName	Name of the Camel component that will perform the requests. The component must be present in Camel registry and it must implement RestProducerFactory service provider interface. If not set CLASSPATH is searched for single component that implements RestProducerFactory SPI. Overrides component configuration.	null	MEDIUM
camel.sink.endpoint.consumes	What payload type this component capable of consuming. Could be one type, like application/json or multiple types as application/json, application/xml; q=0.5 according to the RFC7231. This equates to the value of Accept HTTP header. If set overrides any value found in the Swagger specification and. in the component configuration	null	MEDIUM
camel.sink.endpoint.host	Scheme hostname and port to direct the HTTP requests to in the form of https://hostname:port. Can be configured at the endpoint, component or in the corresponding REST configuration in the Camel Context. If you give this component a name (e.g. petstore) that REST configuration is consulted first, rest-swagger next, and global configuration last. If set overrides any value found in the Swagger specification, RestConfiguration. Overrides all other configuration.	null	MEDIUM
camel.sink.endpoint.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	MEDIUM
camel.sink.endpoint.produces	What payload type this component is producing. For example application/json according to the RFC7231. This equates to the value of Content-Type HTTP header. If set overrides any value present in the Swagger specification. Overrides all other configuration.	null	MEDIUM
camel.sink.endpoint.basicPropertyBinding	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.sink.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	MEDIUM
camel.sink.endpoint.sslContextParameters	To configure security using SSLContextParameters.	null	MEDIUM
camel.component.rest-swagger.basePath	API basePath, for example /v2. Default is unset, if set overrides the value present in Swagger specification.	null	MEDIUM
camel.component.rest-swagger.componentName	Name of the Camel component that will perform the requests. The component must be present in Camel registry and it must implement RestProducerFactory service provider interface. If not set CLASSPATH is searched for single component that implements RestProducerFactory SPI. Can be overridden in endpoint configuration.	null	MEDIUM
camel.component.rest-swagger.consumes	What payload type this component capable of consuming. Could be one type, like application/json or multiple types as application/json, application/xml; q=0.5 according to the RFC7231. This equates to the value of Accept HTTP header. If set overrides any value found in the Swagger specification. Can be overridden in endpoint configuration	null	MEDIUM
camel.component.rest-swagger.host	Scheme hostname and port to direct the HTTP requests to in the form of https://hostname:port. Can be configured at the endpoint, component or in the corresponding REST configuration in the Camel Context. If you give this component a name (e.g. petstore) that REST configuration is consulted first, rest-swagger next, and global configuration last. If set overrides any value found in the Swagger specification, RestConfiguration. Can be overridden in endpoint configuration.	null	MEDIUM
camel.component.rest-swagger.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	MEDIUM
camel.component.rest-swagger.produces	What payload type this component is producing. For example application/json according to the RFC7231. This equates to the value of Content-Type HTTP header. If set overrides any value present in the Swagger specification. Can be overridden in endpoint configuration.	null	MEDIUM
camel.component.rest-swagger.specificationUri	Path to the Swagger specification file. The scheme, host base path are taken from this specification, but these can be overridden with properties on the component or endpoint level. If not given the component tries to load swagger.json resource. Note that the host defined on the component and endpoint of this Component should contain the scheme, hostname and optionally the port in the URI syntax (i.e. https://api.example.com:8080). Can be overridden in endpoint configuration.	"swagger.json"	MEDIUM
camel.component.rest-swagger.basicPropertyBinding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.component.rest-swagger.sslContextParameters	Customize TLS parameters used by the component. If not set defaults to the TLS parameters set in the Camel context	null	MEDIUM
camel.component.rest-swagger.useGlobalSslContext Parameters	Enable usage of global SSL context parameters.	false	MEDIUM

Name

Description

Default

Priority

camel.sink.path.specificationUri

Path to the Swagger specification file. The scheme, host base path are taken from this specification, but these can be overridden with properties on the component or endpoint level. If not given the component tries to load swagger.json resource from the classpath. Note that the host defined on the component and endpoint of this Component should contain the scheme, hostname and optionally the port in the URI syntax (i.e. http://api.example.com:8080). Overrides component configuration. The Swagger specification can be loaded from different sources by prefixing with file: classpath: http: https:. Support for https is limited to using the JDK installed UrlHandler, and as such it can be cumbersome to setup TLS/SSL certificates for https (such as setting a number of javax.net.ssl JVM system properties). How to do that consult the JDK documentation for UrlHandler. Default value notice: By default loads swagger.json file

"swagger.json"

MEDIUM

camel.sink.path.operationId

ID of the operation from the Swagger specification.

null

HIGH

camel.sink.endpoint.basePath

API basePath, for example /v2. Default is unset, if set overrides the value present in Swagger specification and in the component configuration.

null

MEDIUM

camel.sink.endpoint.componentName

Name of the Camel component that will perform the requests. The component must be present in Camel registry and it must implement RestProducerFactory service provider interface. If not set CLASSPATH is searched for single component that implements RestProducerFactory SPI. Overrides component configuration.

null

MEDIUM

camel.sink.endpoint.consumes

What payload type this component capable of consuming. Could be one type, like application/json or multiple types as application/json, application/xml; q=0.5 according to the RFC7231. This equates to the value of Accept HTTP header. If set overrides any value found in the Swagger specification and. in the component configuration

null

MEDIUM

camel.sink.endpoint.host

Scheme hostname and port to direct the HTTP requests to in the form of https://hostname:port. Can be configured at the endpoint, component or in the corresponding REST configuration in the Camel Context. If you give this component a name (e.g. petstore) that REST configuration is consulted first, rest-swagger next, and global configuration last. If set overrides any value found in the Swagger specification, RestConfiguration. Overrides all other configuration.

null

MEDIUM

camel.sink.endpoint.lazyStartProducer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

MEDIUM

camel.sink.endpoint.produces

What payload type this component is producing. For example application/json according to the RFC7231. This equates to the value of Content-Type HTTP header. If set overrides any value present in the Swagger specification. Overrides all other configuration.

null

MEDIUM

camel.sink.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.sink.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.sink.endpoint.sslContextParameters

To configure security using SSLContextParameters.

null

MEDIUM

camel.component.rest-swagger.basePath

API basePath, for example /v2. Default is unset, if set overrides the value present in Swagger specification.

null

MEDIUM

camel.component.rest-swagger.componentName

null

MEDIUM

camel.component.rest-swagger.consumes

null

MEDIUM

camel.component.rest-swagger.host

null

MEDIUM

camel.component.rest-swagger.lazyStartProducer

false

MEDIUM

camel.component.rest-swagger.produces

null

MEDIUM

camel.component.rest-swagger.specificationUri

"swagger.json"

MEDIUM

camel.component.rest-swagger.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.component.rest-swagger.sslContextParameters

Customize TLS parameters used by the component. If not set defaults to the TLS parameters set in the Camel context

null

MEDIUM

camel.component.rest-swagger.useGlobalSslContext Parameters

Enable usage of global SSL context parameters.

false

MEDIUM