camel-websocket-kafka-connector sink configuration

When using camel-websocket-kafka-connector as sink make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-websocket-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Sink connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.websocket.CamelWebsocketSinkConnector

The camel-websocket sink connector supports 31 options, which are listed below.

Name	Description	Default	Priority
camel.sink.path.host	The hostname. The default value is 0.0.0.0. Setting this option on the component will use the component configured value as default.	"0.0.0.0"	MEDIUM
camel.sink.path.port	The port number. The default value is 9292. Setting this option on the component will use the component configured value as default.	"9292"	MEDIUM
camel.sink.path.resourceUri	Name of the websocket channel to use	null	HIGH
camel.sink.endpoint.maxBinaryMessageSize	Can be used to set the size in bytes that the websocket created by the websocketServlet may be accept before closing. (Default is -1 - or unlimited)	"-1"	MEDIUM
camel.sink.endpoint.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	MEDIUM
camel.sink.endpoint.sendTimeout	Timeout in millis when sending to a websocket channel. The default timeout is 30000 (30 seconds).	"30000"	MEDIUM
camel.sink.endpoint.sendToAll	To send to all websocket subscribers. Can be used to configure on endpoint level, instead of having to use the WebsocketConstants.SEND_TO_ALL header on the message.	null	MEDIUM
camel.sink.endpoint.basicPropertyBinding	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.sink.endpoint.bufferSize	Set the buffer size of the websocketServlet, which is also the max frame byte size (default 8192)	"8192"	MEDIUM
camel.sink.endpoint.maxIdleTime	Set the time in ms that the websocket created by the websocketServlet may be idle before closing. (default is 300000)	"300000"	MEDIUM
camel.sink.endpoint.maxTextMessageSize	Can be used to set the size in characters that the websocket created by the websocketServlet may be accept before closing.	null	MEDIUM
camel.sink.endpoint.minVersion	Can be used to set the minimum protocol version accepted for the websocketServlet. (Default 13 - the RFC6455 version)	"13"	MEDIUM
camel.sink.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	MEDIUM
camel.sink.endpoint.allowedOrigins	The CORS allowed origins. Use to allow all.	null	MEDIUM
camel.sink.endpoint.crossOriginFilterOn	Whether to enable CORS	false	MEDIUM
camel.sink.endpoint.filterPath	Context path for filtering CORS	null	MEDIUM
camel.sink.endpoint.enableJmx	If this option is true, Jetty JMX support will be enabled for this endpoint. See Jetty JMX support for more details.	false	MEDIUM
camel.sink.endpoint.sslContextParameters	To configure security using SSLContextParameters	null	MEDIUM
camel.component.websocket.host	The hostname. The default value is 0.0.0.0	"0.0.0.0"	MEDIUM
camel.component.websocket.port	The port number. The default value is 9292	"9292"	MEDIUM
camel.component.websocket.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	MEDIUM
camel.component.websocket.basicPropertyBinding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.component.websocket.enableJmx	If this option is true, Jetty JMX support will be enabled for this endpoint. See Jetty JMX support for more details.	false	MEDIUM
camel.component.websocket.maxThreads	To set a value for maximum number of threads in server thread pool. MaxThreads/minThreads or threadPool fields are required due to switch to Jetty9. The default values for maxThreads is 1 2 noCores.	null	MEDIUM
camel.component.websocket.minThreads	To set a value for minimum number of threads in server thread pool. MaxThreads/minThreads or threadPool fields are required due to switch to Jetty9. The default values for minThreads is 1.	null	MEDIUM
camel.component.websocket.threadPool	To use a custom thread pool for the server. MaxThreads/minThreads or threadPool fields are required due to switch to Jetty9.	null	MEDIUM
camel.component.websocket.sslContextParameters	To configure security using SSLContextParameters	null	MEDIUM
camel.component.websocket.sslKeyPassword	The password for the keystore when using SSL.	null	MEDIUM
camel.component.websocket.sslKeystore	The path to the keystore.	null	MEDIUM
camel.component.websocket.sslPassword	The password when using SSL.	null	MEDIUM
camel.component.websocket.useGlobalSslContext Parameters	Enable usage of global SSL context parameters.	false	MEDIUM

Name

Description

Default

Priority

camel.sink.path.host

The hostname. The default value is 0.0.0.0. Setting this option on the component will use the component configured value as default.

"0.0.0.0"

MEDIUM

camel.sink.path.port

The port number. The default value is 9292. Setting this option on the component will use the component configured value as default.

"9292"

MEDIUM

camel.sink.path.resourceUri

Name of the websocket channel to use

null

HIGH

camel.sink.endpoint.maxBinaryMessageSize

Can be used to set the size in bytes that the websocket created by the websocketServlet may be accept before closing. (Default is -1 - or unlimited)

"-1"

MEDIUM

camel.sink.endpoint.lazyStartProducer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

MEDIUM

camel.sink.endpoint.sendTimeout

Timeout in millis when sending to a websocket channel. The default timeout is 30000 (30 seconds).

"30000"

MEDIUM

camel.sink.endpoint.sendToAll

To send to all websocket subscribers. Can be used to configure on endpoint level, instead of having to use the WebsocketConstants.SEND_TO_ALL header on the message.

null

MEDIUM

camel.sink.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.sink.endpoint.bufferSize

Set the buffer size of the websocketServlet, which is also the max frame byte size (default 8192)

"8192"

MEDIUM

camel.sink.endpoint.maxIdleTime

Set the time in ms that the websocket created by the websocketServlet may be idle before closing. (default is 300000)

"300000"

MEDIUM

camel.sink.endpoint.maxTextMessageSize

Can be used to set the size in characters that the websocket created by the websocketServlet may be accept before closing.

null

MEDIUM

camel.sink.endpoint.minVersion

Can be used to set the minimum protocol version accepted for the websocketServlet. (Default 13 - the RFC6455 version)

"13"

MEDIUM

camel.sink.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.sink.endpoint.allowedOrigins

The CORS allowed origins. Use to allow all.

null

MEDIUM

camel.sink.endpoint.crossOriginFilterOn

Whether to enable CORS

false

MEDIUM

camel.sink.endpoint.filterPath

Context path for filtering CORS

null

MEDIUM

camel.sink.endpoint.enableJmx

If this option is true, Jetty JMX support will be enabled for this endpoint. See Jetty JMX support for more details.

false

MEDIUM

camel.sink.endpoint.sslContextParameters

To configure security using SSLContextParameters

null

MEDIUM

camel.component.websocket.host

The hostname. The default value is 0.0.0.0

"0.0.0.0"

MEDIUM

camel.component.websocket.port

The port number. The default value is 9292

"9292"

MEDIUM

camel.component.websocket.lazyStartProducer

false

MEDIUM

camel.component.websocket.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.component.websocket.enableJmx

If this option is true, Jetty JMX support will be enabled for this endpoint. See Jetty JMX support for more details.

false

MEDIUM

camel.component.websocket.maxThreads

To set a value for maximum number of threads in server thread pool. MaxThreads/minThreads or threadPool fields are required due to switch to Jetty9. The default values for maxThreads is 1 2 noCores.

null

MEDIUM

camel.component.websocket.minThreads

To set a value for minimum number of threads in server thread pool. MaxThreads/minThreads or threadPool fields are required due to switch to Jetty9. The default values for minThreads is 1.

null

MEDIUM

camel.component.websocket.threadPool

To use a custom thread pool for the server. MaxThreads/minThreads or threadPool fields are required due to switch to Jetty9.

null

MEDIUM

camel.component.websocket.sslContextParameters

To configure security using SSLContextParameters

null

MEDIUM

camel.component.websocket.sslKeyPassword

The password for the keystore when using SSL.

null

MEDIUM

camel.component.websocket.sslKeystore

The path to the keystore.

null

MEDIUM

camel.component.websocket.sslPassword

The password when using SSL.

null

MEDIUM

camel.component.websocket.useGlobalSslContext Parameters

Enable usage of global SSL context parameters.

false

MEDIUM