camel-aws2-lambda-kafka-connector sink configuration

When using camel-aws2-lambda-kafka-connector as sink make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-aws2-lambda-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Sink connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.aws2lambda.CamelAws2lambdaSinkConnector

The camel-aws2-lambda sink connector supports 26 options, which are listed below.

Name	Description	Default	Required	Priority
camel.sink.path.function	Name of the Lambda function.	null	true	HIGH
camel.sink.endpoint.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	false	MEDIUM
camel.sink.endpoint.operation	The operation to perform. It can be listFunctions, getFunction, createFunction, deleteFunction or invokeFunction One of: [listFunctions] [getFunction] [createAlias] [deleteAlias] [getAlias] [listAliases] [createFunction] [deleteFunction] [invokeFunction] [updateFunction] [createEventSourceMapping] [deleteEventSourceMapping] [listEventSourceMapping] [listTags] [tagResource] [untagResource] [publishVersion] [listVersions]	"invokeFunction"	false	MEDIUM
camel.sink.endpoint.pojoRequest	If we want to use a POJO request as body or not	false	false	MEDIUM
camel.sink.endpoint.region	The region in which ECS client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id()	null	false	MEDIUM
camel.sink.endpoint.trustAllCertificates	If we want to trust all certificates in case of overriding the endpoint	false	false	MEDIUM
camel.sink.endpoint.awsLambdaClient	To use a existing configured AwsLambdaClient as client	null	false	MEDIUM
camel.sink.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	false	MEDIUM
camel.sink.endpoint.proxyHost	To define a proxy host when instantiating the Lambda client	null	false	MEDIUM
camel.sink.endpoint.proxyPort	To define a proxy port when instantiating the Lambda client	null	false	MEDIUM
camel.sink.endpoint.proxyProtocol	To define a proxy protocol when instantiating the Lambda client One of: [HTTP] [HTTPS]	"HTTPS"	false	MEDIUM
camel.sink.endpoint.accessKey	Amazon AWS Access Key	null	false	MEDIUM
camel.sink.endpoint.secretKey	Amazon AWS Secret Key	null	false	MEDIUM
camel.component.aws2-lambda.configuration	Component configuration	null	false	MEDIUM
camel.component.aws2-lambda.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	false	MEDIUM
camel.component.aws2-lambda.operation	The operation to perform. It can be listFunctions, getFunction, createFunction, deleteFunction or invokeFunction One of: [listFunctions] [getFunction] [createAlias] [deleteAlias] [getAlias] [listAliases] [createFunction] [deleteFunction] [invokeFunction] [updateFunction] [createEventSourceMapping] [deleteEventSourceMapping] [listEventSourceMapping] [listTags] [tagResource] [untagResource] [publishVersion] [listVersions]	"invokeFunction"	false	MEDIUM
camel.component.aws2-lambda.pojoRequest	If we want to use a POJO request as body or not	false	false	MEDIUM
camel.component.aws2-lambda.region	The region in which ECS client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id()	null	false	MEDIUM
camel.component.aws2-lambda.trustAllCertificates	If we want to trust all certificates in case of overriding the endpoint	false	false	MEDIUM
camel.component.aws2-lambda.autowiredEnabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	false	MEDIUM
camel.component.aws2-lambda.awsLambdaClient	To use a existing configured AwsLambdaClient as client	null	false	MEDIUM
camel.component.aws2-lambda.proxyHost	To define a proxy host when instantiating the Lambda client	null	false	MEDIUM
camel.component.aws2-lambda.proxyPort	To define a proxy port when instantiating the Lambda client	null	false	MEDIUM
camel.component.aws2-lambda.proxyProtocol	To define a proxy protocol when instantiating the Lambda client One of: [HTTP] [HTTPS]	"HTTPS"	false	MEDIUM
camel.component.aws2-lambda.accessKey	Amazon AWS Access Key	null	false	MEDIUM
camel.component.aws2-lambda.secretKey	Amazon AWS Secret Key	null	false	MEDIUM

Name

Description

Default

Required

Priority

camel.sink.path.function

Name of the Lambda function.

null

true

HIGH

camel.sink.endpoint.lazyStartProducer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

MEDIUM

camel.sink.endpoint.operation

The operation to perform. It can be listFunctions, getFunction, createFunction, deleteFunction or invokeFunction One of: [listFunctions] [getFunction] [createAlias] [deleteAlias] [getAlias] [listAliases] [createFunction] [deleteFunction] [invokeFunction] [updateFunction] [createEventSourceMapping] [deleteEventSourceMapping] [listEventSourceMapping] [listTags] [tagResource] [untagResource] [publishVersion] [listVersions]

"invokeFunction"

false

MEDIUM

camel.sink.endpoint.pojoRequest

If we want to use a POJO request as body or not

false

MEDIUM

camel.sink.endpoint.region

The region in which ECS client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id()

null

false

MEDIUM

camel.sink.endpoint.trustAllCertificates

If we want to trust all certificates in case of overriding the endpoint

false

MEDIUM

camel.sink.endpoint.awsLambdaClient

To use a existing configured AwsLambdaClient as client

null

false

MEDIUM

camel.sink.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.sink.endpoint.proxyHost

To define a proxy host when instantiating the Lambda client

null

false

MEDIUM

camel.sink.endpoint.proxyPort

To define a proxy port when instantiating the Lambda client

null

false

MEDIUM

camel.sink.endpoint.proxyProtocol

To define a proxy protocol when instantiating the Lambda client One of: [HTTP] [HTTPS]

"HTTPS"

false

MEDIUM

camel.sink.endpoint.accessKey

Amazon AWS Access Key

null

false

MEDIUM

camel.sink.endpoint.secretKey

Amazon AWS Secret Key

null

false

MEDIUM

camel.component.aws2-lambda.configuration

Component configuration

null

false

MEDIUM

camel.component.aws2-lambda.lazyStartProducer

false

MEDIUM

camel.component.aws2-lambda.operation

"invokeFunction"

false

MEDIUM

camel.component.aws2-lambda.pojoRequest

If we want to use a POJO request as body or not

false

MEDIUM

camel.component.aws2-lambda.region

null

false

MEDIUM

camel.component.aws2-lambda.trustAllCertificates

If we want to trust all certificates in case of overriding the endpoint

false

MEDIUM

camel.component.aws2-lambda.autowiredEnabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

false

MEDIUM

camel.component.aws2-lambda.awsLambdaClient

To use a existing configured AwsLambdaClient as client

null

false

MEDIUM

camel.component.aws2-lambda.proxyHost

To define a proxy host when instantiating the Lambda client

null

false

MEDIUM

camel.component.aws2-lambda.proxyPort

To define a proxy port when instantiating the Lambda client

null

false

MEDIUM

camel.component.aws2-lambda.proxyProtocol

To define a proxy protocol when instantiating the Lambda client One of: [HTTP] [HTTPS]

"HTTPS"

false

MEDIUM

camel.component.aws2-lambda.accessKey

Amazon AWS Access Key

null

false

MEDIUM

camel.component.aws2-lambda.secretKey

Amazon AWS Secret Key

null

false

MEDIUM

The camel-aws2-lambda sink connector has no converters out of the box.

The camel-aws2-lambda sink connector has no transforms out of the box.

The camel-aws2-lambda sink connector has no aggregation strategies out of the box.