camel-aws2-s3-kafka-connector sink configuration

When using camel-aws2-s3-kafka-connector as sink make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-aws2-s3-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Sink connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.aws2s3.CamelAws2s3SinkConnector

The camel-aws2-s3 sink connector supports 60 options, which are listed below.

Name	Description	Default	Required	Priority
camel.sink.path.bucketNameOrArn	Bucket name or ARN	null	true	HIGH
camel.sink.endpoint.amazonS3Client	Reference to a com.amazonaws.services.s3.AmazonS3 in the registry.	null	false	MEDIUM
camel.sink.endpoint.amazonS3Presigner	An S3 Presigner for Request, used mainly in createDownloadLink operation	null	false	MEDIUM
camel.sink.endpoint.autoCreateBucket	Setting the autocreation of the S3 bucket bucketName. This will apply also in case of moveAfterRead option enabled and it will create the destinationBucket if it doesn’t exist already.	true	false	MEDIUM
camel.sink.endpoint.overrideEndpoint	Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option	false	false	MEDIUM
camel.sink.endpoint.pojoRequest	If we want to use a POJO request as body or not	false	false	MEDIUM
camel.sink.endpoint.policy	The policy for this queue to set in the com.amazonaws.services.s3.AmazonS3#setBucketPolicy() method.	null	false	MEDIUM
camel.sink.endpoint.proxyHost	To define a proxy host when instantiating the SQS client	null	false	MEDIUM
camel.sink.endpoint.proxyPort	Specify a proxy port to be used inside the client definition.	null	false	MEDIUM
camel.sink.endpoint.proxyProtocol	To define a proxy protocol when instantiating the S3 client One of: [HTTP] [HTTPS]	"HTTPS"	false	MEDIUM
camel.sink.endpoint.region	The region in which S3 client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id()	null	false	MEDIUM
camel.sink.endpoint.trustAllCertificates	If we want to trust all certificates in case of overriding the endpoint	false	false	MEDIUM
camel.sink.endpoint.uriEndpointOverride	Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option	null	false	MEDIUM
camel.sink.endpoint.useDefaultCredentialsProvider	Set whether the S3 client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.	false	false	MEDIUM
camel.sink.endpoint.customerAlgorithm	Define the customer algorithm to use in case CustomerKey is enabled	null	false	MEDIUM
camel.sink.endpoint.customerKeyId	Define the id of Customer key to use in case CustomerKey is enabled	null	false	MEDIUM
camel.sink.endpoint.customerKeyMD5	Define the MD5 of Customer key to use in case CustomerKey is enabled	null	false	MEDIUM
camel.sink.endpoint.deleteAfterWrite	Delete file object after the S3 file has been uploaded	false	false	MEDIUM
camel.sink.endpoint.keyName	Setting the key name for an element in the bucket through endpoint parameter	null	false	MEDIUM
camel.sink.endpoint.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	false	MEDIUM
camel.sink.endpoint.multiPartUpload	If it is true, camel will upload the file with multi part format, the part size is decided by the option of partSize	false	false	MEDIUM
camel.sink.endpoint.operation	The operation to do in case the user don’t want to do only an upload One of: [copyObject] [listObjects] [deleteObject] [deleteBucket] [listBuckets] [getObject] [getObjectRange]	null	false	MEDIUM
camel.sink.endpoint.partSize	Setup the partSize which is used in multi part upload, the default size is 25M.	26214400L	false	MEDIUM
camel.sink.endpoint.storageClass	The storage class to set in the com.amazonaws.services.s3.model.PutObjectRequest request.	null	false	MEDIUM
camel.sink.endpoint.awsKMSKeyId	Define the id of KMS key to use in case KMS is enabled	null	false	MEDIUM
camel.sink.endpoint.useAwsKMS	Define if KMS must be used or not	false	false	MEDIUM
camel.sink.endpoint.useCustomerKey	Define if Customer Key must be used or not	false	false	MEDIUM
camel.sink.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	false	MEDIUM
camel.sink.endpoint.accessKey	Amazon AWS Access Key	null	false	MEDIUM
camel.sink.endpoint.secretKey	Amazon AWS Secret Key	null	false	MEDIUM
camel.component.aws2-s3.amazonS3Client	Reference to a com.amazonaws.services.s3.AmazonS3 in the registry.	null	false	MEDIUM
camel.component.aws2-s3.amazonS3Presigner	An S3 Presigner for Request, used mainly in createDownloadLink operation	null	false	MEDIUM
camel.component.aws2-s3.autoCreateBucket	Setting the autocreation of the S3 bucket bucketName. This will apply also in case of moveAfterRead option enabled and it will create the destinationBucket if it doesn’t exist already.	true	false	MEDIUM
camel.component.aws2-s3.configuration	The component configuration	null	false	MEDIUM
camel.component.aws2-s3.overrideEndpoint	Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option	false	false	MEDIUM
camel.component.aws2-s3.pojoRequest	If we want to use a POJO request as body or not	false	false	MEDIUM
camel.component.aws2-s3.policy	The policy for this queue to set in the com.amazonaws.services.s3.AmazonS3#setBucketPolicy() method.	null	false	MEDIUM
camel.component.aws2-s3.proxyHost	To define a proxy host when instantiating the SQS client	null	false	MEDIUM
camel.component.aws2-s3.proxyPort	Specify a proxy port to be used inside the client definition.	null	false	MEDIUM
camel.component.aws2-s3.proxyProtocol	To define a proxy protocol when instantiating the S3 client One of: [HTTP] [HTTPS]	"HTTPS"	false	MEDIUM
camel.component.aws2-s3.region	The region in which S3 client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id()	null	false	MEDIUM
camel.component.aws2-s3.trustAllCertificates	If we want to trust all certificates in case of overriding the endpoint	false	false	MEDIUM
camel.component.aws2-s3.uriEndpointOverride	Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option	null	false	MEDIUM
camel.component.aws2-s3.useDefaultCredentials Provider	Set whether the S3 client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.	false	false	MEDIUM
camel.component.aws2-s3.customerAlgorithm	Define the customer algorithm to use in case CustomerKey is enabled	null	false	MEDIUM
camel.component.aws2-s3.customerKeyId	Define the id of Customer key to use in case CustomerKey is enabled	null	false	MEDIUM
camel.component.aws2-s3.customerKeyMD5	Define the MD5 of Customer key to use in case CustomerKey is enabled	null	false	MEDIUM
camel.component.aws2-s3.deleteAfterWrite	Delete file object after the S3 file has been uploaded	false	false	MEDIUM
camel.component.aws2-s3.keyName	Setting the key name for an element in the bucket through endpoint parameter	null	false	MEDIUM
camel.component.aws2-s3.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	false	MEDIUM
camel.component.aws2-s3.multiPartUpload	If it is true, camel will upload the file with multi part format, the part size is decided by the option of partSize	false	false	MEDIUM
camel.component.aws2-s3.operation	The operation to do in case the user don’t want to do only an upload One of: [copyObject] [listObjects] [deleteObject] [deleteBucket] [listBuckets] [getObject] [getObjectRange]	null	false	MEDIUM
camel.component.aws2-s3.partSize	Setup the partSize which is used in multi part upload, the default size is 25M.	26214400L	false	MEDIUM
camel.component.aws2-s3.storageClass	The storage class to set in the com.amazonaws.services.s3.model.PutObjectRequest request.	null	false	MEDIUM
camel.component.aws2-s3.awsKMSKeyId	Define the id of KMS key to use in case KMS is enabled	null	false	MEDIUM
camel.component.aws2-s3.useAwsKMS	Define if KMS must be used or not	false	false	MEDIUM
camel.component.aws2-s3.useCustomerKey	Define if Customer Key must be used or not	false	false	MEDIUM
camel.component.aws2-s3.autowiredEnabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	false	MEDIUM
camel.component.aws2-s3.accessKey	Amazon AWS Access Key	null	false	MEDIUM
camel.component.aws2-s3.secretKey	Amazon AWS Secret Key	null	false	MEDIUM

Name

Description

Default

Required

Priority

camel.sink.path.bucketNameOrArn

Bucket name or ARN

null

true

HIGH

camel.sink.endpoint.amazonS3Client

Reference to a com.amazonaws.services.s3.AmazonS3 in the registry.

null

false

MEDIUM

camel.sink.endpoint.amazonS3Presigner

An S3 Presigner for Request, used mainly in createDownloadLink operation

null

false

MEDIUM

camel.sink.endpoint.autoCreateBucket

Setting the autocreation of the S3 bucket bucketName. This will apply also in case of moveAfterRead option enabled and it will create the destinationBucket if it doesn’t exist already.

true

false

MEDIUM

camel.sink.endpoint.overrideEndpoint

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option

false

MEDIUM

camel.sink.endpoint.pojoRequest

If we want to use a POJO request as body or not

false

MEDIUM

camel.sink.endpoint.policy

The policy for this queue to set in the com.amazonaws.services.s3.AmazonS3#setBucketPolicy() method.

null

false

MEDIUM

camel.sink.endpoint.proxyHost

To define a proxy host when instantiating the SQS client

null

false

MEDIUM

camel.sink.endpoint.proxyPort

Specify a proxy port to be used inside the client definition.

null

false

MEDIUM

camel.sink.endpoint.proxyProtocol

To define a proxy protocol when instantiating the S3 client One of: [HTTP] [HTTPS]

"HTTPS"

false

MEDIUM

camel.sink.endpoint.region

The region in which S3 client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id()

null

false

MEDIUM

camel.sink.endpoint.trustAllCertificates

If we want to trust all certificates in case of overriding the endpoint

false

MEDIUM

camel.sink.endpoint.uriEndpointOverride

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option

null

false

MEDIUM

camel.sink.endpoint.useDefaultCredentialsProvider

Set whether the S3 client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

MEDIUM

camel.sink.endpoint.customerAlgorithm

Define the customer algorithm to use in case CustomerKey is enabled

null

false

MEDIUM

camel.sink.endpoint.customerKeyId

Define the id of Customer key to use in case CustomerKey is enabled

null

false

MEDIUM

camel.sink.endpoint.customerKeyMD5

Define the MD5 of Customer key to use in case CustomerKey is enabled

null

false

MEDIUM

camel.sink.endpoint.deleteAfterWrite

Delete file object after the S3 file has been uploaded

false

MEDIUM

camel.sink.endpoint.keyName

Setting the key name for an element in the bucket through endpoint parameter

null

false

MEDIUM

camel.sink.endpoint.lazyStartProducer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

MEDIUM

camel.sink.endpoint.multiPartUpload

If it is true, camel will upload the file with multi part format, the part size is decided by the option of partSize

false

MEDIUM

camel.sink.endpoint.operation

The operation to do in case the user don’t want to do only an upload One of: [copyObject] [listObjects] [deleteObject] [deleteBucket] [listBuckets] [getObject] [getObjectRange]

null

false

MEDIUM

camel.sink.endpoint.partSize

Setup the partSize which is used in multi part upload, the default size is 25M.

26214400L

false

MEDIUM

camel.sink.endpoint.storageClass

The storage class to set in the com.amazonaws.services.s3.model.PutObjectRequest request.

null

false

MEDIUM

camel.sink.endpoint.awsKMSKeyId

Define the id of KMS key to use in case KMS is enabled

null

false

MEDIUM

camel.sink.endpoint.useAwsKMS

Define if KMS must be used or not

false

MEDIUM

camel.sink.endpoint.useCustomerKey

Define if Customer Key must be used or not

false

MEDIUM

camel.sink.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.sink.endpoint.accessKey

Amazon AWS Access Key

null

false

MEDIUM

camel.sink.endpoint.secretKey

Amazon AWS Secret Key

null

false

MEDIUM

camel.component.aws2-s3.amazonS3Client

Reference to a com.amazonaws.services.s3.AmazonS3 in the registry.

null

false

MEDIUM

camel.component.aws2-s3.amazonS3Presigner

An S3 Presigner for Request, used mainly in createDownloadLink operation

null

false

MEDIUM

camel.component.aws2-s3.autoCreateBucket

Setting the autocreation of the S3 bucket bucketName. This will apply also in case of moveAfterRead option enabled and it will create the destinationBucket if it doesn’t exist already.

true

false

MEDIUM

camel.component.aws2-s3.configuration

The component configuration

null

false

MEDIUM

camel.component.aws2-s3.overrideEndpoint

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option

false

MEDIUM

camel.component.aws2-s3.pojoRequest

If we want to use a POJO request as body or not

false

MEDIUM

camel.component.aws2-s3.policy

The policy for this queue to set in the com.amazonaws.services.s3.AmazonS3#setBucketPolicy() method.

null

false

MEDIUM

camel.component.aws2-s3.proxyHost

To define a proxy host when instantiating the SQS client

null

false

MEDIUM

camel.component.aws2-s3.proxyPort

Specify a proxy port to be used inside the client definition.

null

false

MEDIUM

camel.component.aws2-s3.proxyProtocol

To define a proxy protocol when instantiating the S3 client One of: [HTTP] [HTTPS]

"HTTPS"

false

MEDIUM

camel.component.aws2-s3.region

null

false

MEDIUM

camel.component.aws2-s3.trustAllCertificates

If we want to trust all certificates in case of overriding the endpoint

false

MEDIUM

camel.component.aws2-s3.uriEndpointOverride

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option

null

false

MEDIUM

camel.component.aws2-s3.useDefaultCredentials Provider

Set whether the S3 client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

MEDIUM

camel.component.aws2-s3.customerAlgorithm

Define the customer algorithm to use in case CustomerKey is enabled

null

false

MEDIUM

camel.component.aws2-s3.customerKeyId

Define the id of Customer key to use in case CustomerKey is enabled

null

false

MEDIUM

camel.component.aws2-s3.customerKeyMD5

Define the MD5 of Customer key to use in case CustomerKey is enabled

null

false

MEDIUM

camel.component.aws2-s3.deleteAfterWrite

Delete file object after the S3 file has been uploaded

false

MEDIUM

camel.component.aws2-s3.keyName

Setting the key name for an element in the bucket through endpoint parameter

null

false

MEDIUM

camel.component.aws2-s3.lazyStartProducer

false

MEDIUM

camel.component.aws2-s3.multiPartUpload

If it is true, camel will upload the file with multi part format, the part size is decided by the option of partSize

false

MEDIUM

camel.component.aws2-s3.operation

The operation to do in case the user don’t want to do only an upload One of: [copyObject] [listObjects] [deleteObject] [deleteBucket] [listBuckets] [getObject] [getObjectRange]

null

false

MEDIUM

camel.component.aws2-s3.partSize

Setup the partSize which is used in multi part upload, the default size is 25M.

26214400L

false

MEDIUM

camel.component.aws2-s3.storageClass

The storage class to set in the com.amazonaws.services.s3.model.PutObjectRequest request.

null

false

MEDIUM

camel.component.aws2-s3.awsKMSKeyId

Define the id of KMS key to use in case KMS is enabled

null

false

MEDIUM

camel.component.aws2-s3.useAwsKMS

Define if KMS must be used or not

false

MEDIUM

camel.component.aws2-s3.useCustomerKey

Define if Customer Key must be used or not

false

MEDIUM

camel.component.aws2-s3.autowiredEnabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

false

MEDIUM

camel.component.aws2-s3.accessKey

Amazon AWS Access Key

null

false

MEDIUM

camel.component.aws2-s3.secretKey

Amazon AWS Secret Key

null

false

MEDIUM

The camel-aws2-s3 sink connector supports 1 converters out of the box, which are listed below.

org.apache.camel.kafkaconnector.aws2s3.converters.S3ObjectConverter

The camel-aws2-s3 sink connector supports 1 transforms out of the box, which are listed below.

org.apache.camel.kafkaconnector.aws2s3.transformers.S3ObjectTransforms

The camel-aws2-s3 sink connector supports 1 aggregation strategies out of the box, which are listed below.

org.apache.camel.kafkaconnector.aws2s3.aggregation.NewlineAggregationStrategy