camel-azure-eventhubs-kafka-connector sink configuration

When using camel-azure-eventhubs-kafka-connector as sink make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-azure-eventhubs-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Sink connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.azureeventhubs.CamelAzureeventhubsSinkConnector

The camel-azure-eventhubs sink connector supports 25 options, which are listed below.

Name	Description	Default	Required	Priority
camel.sink.path.namespace	EventHubs namespace created in Azure Portal	null	false	MEDIUM
camel.sink.path.eventHubName	EventHubs name under a specific namcespace	null	false	MEDIUM
camel.sink.endpoint.amqpRetryOptions	Sets the retry policy for EventHubAsyncClient. If not specified, the default retry options are used.	null	false	MEDIUM
camel.sink.endpoint.amqpTransportType	Sets the transport type by which all the communication with Azure Event Hubs occurs. Default value is AmqpTransportType#AMQP. One of: [Amqp] [AmqpWebSockets]	"AMQP"	false	MEDIUM
camel.sink.endpoint.autoDiscoverClient	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	false	MEDIUM
camel.sink.endpoint.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	false	MEDIUM
camel.sink.endpoint.partitionId	Sets the identifier of the Event Hub partition that the events will be sent to. If the identifier is not specified, the Event Hubs service will be responsible for routing events that are sent to an available partition.	null	false	MEDIUM
camel.sink.endpoint.partitionKey	Sets a hashing key to be provided for the batch of events, which instructs the Event Hubs service to map this key to a specific partition. The selection of a partition is stable for a given partition hashing key. Should any other batches of events be sent using the same exact partition hashing key, the Event Hubs service will route them all to the same partition. This should be specified only when there is a need to group events by partition, but there is flexibility into which partition they are routed. If ensuring that a batch of events is sent only to a specific partition, it is recommended that the {link #setPartitionId(String) identifier of the position be specified directly} when sending the batch.	null	false	MEDIUM
camel.sink.endpoint.producerAsyncClient	Sets the EventHubProducerAsyncClient.An asynchronous producer responsible for transmitting EventData to a specific Event Hub, grouped together in batches. Depending on the options specified when creating an {linkEventDataBatch}, the events may be automatically routed to an available partition or specific to a partition. Use by this component to produce the data in camel producer.	null	false	MEDIUM
camel.sink.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	false	MEDIUM
camel.sink.endpoint.connectionString	Instead of supplying namespace, sharedAccessKey, sharedAccessName … etc, you can just supply the connection string for your eventHub. The connection string for EventHubs already include all the necessary information to connection to your EventHub. To learn on how to generate the connection string, take a look at this documentation: https://docs.microsoft.com/en-us/azure/event-hubs/event-hubs-get-connection-string	null	false	MEDIUM
camel.sink.endpoint.sharedAccessKey	The generated value for the SharedAccessName	null	false	MEDIUM
camel.sink.endpoint.sharedAccessName	The name you chose for your EventHubs SAS keys	null	false	MEDIUM
camel.component.azure-eventhubs.amqpRetryOptions	Sets the retry policy for EventHubAsyncClient. If not specified, the default retry options are used.	null	false	MEDIUM
camel.component.azure-eventhubs.amqpTransportType	Sets the transport type by which all the communication with Azure Event Hubs occurs. Default value is AmqpTransportType#AMQP. One of: [Amqp] [AmqpWebSockets]	"AMQP"	false	MEDIUM
camel.component.azure-eventhubs.autoDiscoverClient	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	false	MEDIUM
camel.component.azure-eventhubs.configuration	The component configurations	null	false	MEDIUM
camel.component.azure-eventhubs.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	false	MEDIUM
camel.component.azure-eventhubs.partitionId	Sets the identifier of the Event Hub partition that the events will be sent to. If the identifier is not specified, the Event Hubs service will be responsible for routing events that are sent to an available partition.	null	false	MEDIUM
camel.component.azure-eventhubs.partitionKey	Sets a hashing key to be provided for the batch of events, which instructs the Event Hubs service to map this key to a specific partition. The selection of a partition is stable for a given partition hashing key. Should any other batches of events be sent using the same exact partition hashing key, the Event Hubs service will route them all to the same partition. This should be specified only when there is a need to group events by partition, but there is flexibility into which partition they are routed. If ensuring that a batch of events is sent only to a specific partition, it is recommended that the {link #setPartitionId(String) identifier of the position be specified directly} when sending the batch.	null	false	MEDIUM
camel.component.azure-eventhubs.producerAsync Client	Sets the EventHubProducerAsyncClient.An asynchronous producer responsible for transmitting EventData to a specific Event Hub, grouped together in batches. Depending on the options specified when creating an {linkEventDataBatch}, the events may be automatically routed to an available partition or specific to a partition. Use by this component to produce the data in camel producer.	null	false	MEDIUM
camel.component.azure-eventhubs.autowiredEnabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	false	MEDIUM
camel.component.azure-eventhubs.connectionString	Instead of supplying namespace, sharedAccessKey, sharedAccessName … etc, you can just supply the connection string for your eventHub. The connection string for EventHubs already include all the necessary information to connection to your EventHub. To learn on how to generate the connection string, take a look at this documentation: https://docs.microsoft.com/en-us/azure/event-hubs/event-hubs-get-connection-string	null	false	MEDIUM
camel.component.azure-eventhubs.sharedAccessKey	The generated value for the SharedAccessName	null	false	MEDIUM
camel.component.azure-eventhubs.sharedAccessName	The name you chose for your EventHubs SAS keys	null	false	MEDIUM

Name

Description

Default

Required

Priority

camel.sink.path.namespace

EventHubs namespace created in Azure Portal

null

false

MEDIUM

camel.sink.path.eventHubName

EventHubs name under a specific namcespace

null

false

MEDIUM

camel.sink.endpoint.amqpRetryOptions

Sets the retry policy for EventHubAsyncClient. If not specified, the default retry options are used.

null

false

MEDIUM

camel.sink.endpoint.amqpTransportType

Sets the transport type by which all the communication with Azure Event Hubs occurs. Default value is AmqpTransportType#AMQP. One of: [Amqp] [AmqpWebSockets]

"AMQP"

false

MEDIUM

camel.sink.endpoint.autoDiscoverClient

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

false

MEDIUM

camel.sink.endpoint.lazyStartProducer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

MEDIUM

camel.sink.endpoint.partitionId

Sets the identifier of the Event Hub partition that the events will be sent to. If the identifier is not specified, the Event Hubs service will be responsible for routing events that are sent to an available partition.

null

false

MEDIUM

camel.sink.endpoint.partitionKey

Sets a hashing key to be provided for the batch of events, which instructs the Event Hubs service to map this key to a specific partition. The selection of a partition is stable for a given partition hashing key. Should any other batches of events be sent using the same exact partition hashing key, the Event Hubs service will route them all to the same partition. This should be specified only when there is a need to group events by partition, but there is flexibility into which partition they are routed. If ensuring that a batch of events is sent only to a specific partition, it is recommended that the {link #setPartitionId(String) identifier of the position be specified directly} when sending the batch.

null

false

MEDIUM

camel.sink.endpoint.producerAsyncClient

Sets the EventHubProducerAsyncClient.An asynchronous producer responsible for transmitting EventData to a specific Event Hub, grouped together in batches. Depending on the options specified when creating an {linkEventDataBatch}, the events may be automatically routed to an available partition or specific to a partition. Use by this component to produce the data in camel producer.

null

false

MEDIUM

camel.sink.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.sink.endpoint.connectionString

Instead of supplying namespace, sharedAccessKey, sharedAccessName … etc, you can just supply the connection string for your eventHub. The connection string for EventHubs already include all the necessary information to connection to your EventHub. To learn on how to generate the connection string, take a look at this documentation: https://docs.microsoft.com/en-us/azure/event-hubs/event-hubs-get-connection-string

null

false

MEDIUM

camel.sink.endpoint.sharedAccessKey

The generated value for the SharedAccessName

null

false

MEDIUM

camel.sink.endpoint.sharedAccessName

The name you chose for your EventHubs SAS keys

null

false

MEDIUM

camel.component.azure-eventhubs.amqpRetryOptions

Sets the retry policy for EventHubAsyncClient. If not specified, the default retry options are used.

null

false

MEDIUM

camel.component.azure-eventhubs.amqpTransportType

Sets the transport type by which all the communication with Azure Event Hubs occurs. Default value is AmqpTransportType#AMQP. One of: [Amqp] [AmqpWebSockets]

"AMQP"

false

MEDIUM

camel.component.azure-eventhubs.autoDiscoverClient

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

false

MEDIUM

camel.component.azure-eventhubs.configuration

The component configurations

null

false

MEDIUM

camel.component.azure-eventhubs.lazyStartProducer

false

MEDIUM

camel.component.azure-eventhubs.partitionId

null

false

MEDIUM

camel.component.azure-eventhubs.partitionKey

null

false

MEDIUM

camel.component.azure-eventhubs.producerAsync Client

null

false

MEDIUM

camel.component.azure-eventhubs.autowiredEnabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

false

MEDIUM

camel.component.azure-eventhubs.connectionString

null

false

MEDIUM

camel.component.azure-eventhubs.sharedAccessKey

The generated value for the SharedAccessName

null

false

MEDIUM

camel.component.azure-eventhubs.sharedAccessName

The name you chose for your EventHubs SAS keys

null

false

MEDIUM

The camel-azure-eventhubs sink connector has no converters out of the box.

The camel-azure-eventhubs sink connector has no transforms out of the box.

The camel-azure-eventhubs sink connector has no aggregation strategies out of the box.