camel-netty-kafka-connector sink configuration

When using camel-netty-kafka-connector as sink make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-netty-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Sink connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.netty.CamelNettySinkConnector

The camel-netty sink connector supports 107 options, which are listed below.

Name	Description	Default	Required	Priority
camel.sink.path.protocol	The protocol to use which can be tcp or udp. One of: [tcp] [udp]	null	true	HIGH
camel.sink.path.host	The hostname. For the consumer the hostname is localhost or 0.0.0.0. For the producer the hostname is the remote host to connect to	null	true	HIGH
camel.sink.path.port	The host port number	null	true	HIGH
camel.sink.endpoint.disconnect	Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.	false	false	MEDIUM
camel.sink.endpoint.keepAlive	Setting to ensure socket is not closed due to inactivity	true	false	MEDIUM
camel.sink.endpoint.reuseAddress	Setting to facilitate socket multiplexing	true	false	MEDIUM
camel.sink.endpoint.reuseChannel	This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.	false	false	MEDIUM
camel.sink.endpoint.sync	Setting to set endpoint as one-way or request-response	true	false	MEDIUM
camel.sink.endpoint.tcpNoDelay	Setting to improve TCP protocol performance	true	false	MEDIUM
camel.sink.endpoint.connectTimeout	Time to wait for a socket connection to be available. Value is in milliseconds.	10000	false	MEDIUM
camel.sink.endpoint.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	false	MEDIUM
camel.sink.endpoint.requestTimeout	Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds, so eg 30000 is 30 seconds. The requestTimeout is using Netty’s ReadTimeoutHandler to trigger the timeout.	null	false	MEDIUM
camel.sink.endpoint.clientInitializerFactory	To use a custom ClientInitializerFactory	null	false	MEDIUM
camel.sink.endpoint.correlationManager	To use a custom correlation manager to manage how request and reply messages are mapped when using request/reply with the netty producer. This should only be used if you have a way to map requests together with replies such as if there is correlation ids in both the request and reply messages. This can be used if you want to multiplex concurrent messages on the same channel (aka connection) in netty. When doing this you must have a way to correlate the request and reply messages so you can store the right reply on the inflight Camel Exchange before its continued routed. We recommend extending the TimeoutCorrelationManagerSupport when you build custom correlation managers. This provides support for timeout and other complexities you otherwise would need to implement as well. See also the producerPoolEnabled option for more details.	null	false	MEDIUM
camel.sink.endpoint.lazyChannelCreation	Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.	true	false	MEDIUM
camel.sink.endpoint.producerPoolEnabled	Whether producer pool is enabled or not. Important: If you turn this off then a single shared connection is used for the producer, also if you are doing request/reply. That means there is a potential issue with interleaved responses if replies comes back out-of-order. Therefore you need to have a correlation id in both the request and reply messages so you can properly correlate the replies to the Camel callback that is responsible for continue processing the message in Camel. To do this you need to implement NettyCamelStateCorrelationManager as correlation manager and configure it via the correlationManager option. See also the correlationManager option for more details.	true	false	MEDIUM
camel.sink.endpoint.producerPoolMaxActive	Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.	-1	false	MEDIUM
camel.sink.endpoint.producerPoolMaxIdle	Sets the cap on the number of idle instances in the pool.	100	false	MEDIUM
camel.sink.endpoint.producerPoolMinEvictableIdle	Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.	300000L	false	MEDIUM
camel.sink.endpoint.producerPoolMinIdle	Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.	null	false	MEDIUM
camel.sink.endpoint.udpConnectionlessSending	This option supports connection less udp sending which is a real fire and forget. A connected udp send receive the PortUnreachableException if no one is listen on the receiving port.	false	false	MEDIUM
camel.sink.endpoint.useByteBuf	If the useByteBuf is true, netty producer will turn the message body into ByteBuf before sending it out.	false	false	MEDIUM
camel.sink.endpoint.allowSerializedHeaders	Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.	false	false	MEDIUM
camel.sink.endpoint.channelGroup	To use a explicit ChannelGroup.	null	false	MEDIUM
camel.sink.endpoint.nativeTransport	Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html	false	false	MEDIUM
camel.sink.endpoint.options	Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.	null	false	MEDIUM
camel.sink.endpoint.receiveBufferSize	The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.	65536	false	MEDIUM
camel.sink.endpoint.receiveBufferSizePredictor	Configures the buffer size predictor. See details at Jetty documentation and this mail thread.	null	false	MEDIUM
camel.sink.endpoint.sendBufferSize	The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.	65536	false	MEDIUM
camel.sink.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	false	MEDIUM
camel.sink.endpoint.transferExchange	Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.	false	false	MEDIUM
camel.sink.endpoint.udpByteArrayCodec	For UDP only. If enabled the using byte array codec instead of Java serialization protocol.	false	false	MEDIUM
camel.sink.endpoint.workerCount	When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.	null	false	MEDIUM
camel.sink.endpoint.workerGroup	To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads.	null	false	MEDIUM
camel.sink.endpoint.allowDefaultCodec	The netty component installs a default codec if both, encoder/decoder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain.	true	false	MEDIUM
camel.sink.endpoint.autoAppendDelimiter	Whether or not to auto append missing end delimiter when sending using the textline codec.	true	false	MEDIUM
camel.sink.endpoint.decoderMaxLineLength	The max line length to use for the textline codec.	1024	false	MEDIUM
camel.sink.endpoint.decoders	A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.	null	false	MEDIUM
camel.sink.endpoint.delimiter	The delimiter to use for the textline codec. Possible values are LINE and NULL. One of: [LINE] [NULL]	"LINE"	false	MEDIUM
camel.sink.endpoint.encoders	A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.	null	false	MEDIUM
camel.sink.endpoint.encoding	The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.	null	false	MEDIUM
camel.sink.endpoint.textline	Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP - however only Strings are allowed to be serialized by default.	false	false	MEDIUM
camel.sink.endpoint.enabledProtocols	Which protocols to enable when using SSL	"TLSv1,TLSv1.1,TLSv1.2"	false	MEDIUM
camel.sink.endpoint.keyStoreFile	Client side certificate keystore to be used for encryption	null	false	MEDIUM
camel.sink.endpoint.keyStoreFormat	Keystore format to be used for payload encryption. Defaults to JKS if not set	null	false	MEDIUM
camel.sink.endpoint.keyStoreResource	Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.	null	false	MEDIUM
camel.sink.endpoint.passphrase	Password setting to use in order to encrypt/decrypt payloads sent using SSH	null	false	MEDIUM
camel.sink.endpoint.securityProvider	Security provider to be used for payload encryption. Defaults to SunX509 if not set.	null	false	MEDIUM
camel.sink.endpoint.ssl	Setting to specify whether SSL encryption is applied to this endpoint	false	false	MEDIUM
camel.sink.endpoint.sslClientCertHeaders	When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.	false	false	MEDIUM
camel.sink.endpoint.sslContextParameters	To configure security using SSLContextParameters	null	false	MEDIUM
camel.sink.endpoint.sslHandler	Reference to a class that could be used to return an SSL Handler	null	false	MEDIUM
camel.sink.endpoint.trustStoreFile	Server side certificate keystore to be used for encryption	null	false	MEDIUM
camel.sink.endpoint.trustStoreResource	Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.	null	false	MEDIUM
camel.component.netty.configuration	To use the NettyConfiguration as configuration when creating endpoints.	null	false	MEDIUM
camel.component.netty.disconnect	Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.	false	false	MEDIUM
camel.component.netty.keepAlive	Setting to ensure socket is not closed due to inactivity	true	false	MEDIUM
camel.component.netty.reuseAddress	Setting to facilitate socket multiplexing	true	false	MEDIUM
camel.component.netty.reuseChannel	This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.	false	false	MEDIUM
camel.component.netty.sync	Setting to set endpoint as one-way or request-response	true	false	MEDIUM
camel.component.netty.tcpNoDelay	Setting to improve TCP protocol performance	true	false	MEDIUM
camel.component.netty.connectTimeout	Time to wait for a socket connection to be available. Value is in milliseconds.	10000	false	MEDIUM
camel.component.netty.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	false	MEDIUM
camel.component.netty.requestTimeout	Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds, so eg 30000 is 30 seconds. The requestTimeout is using Netty’s ReadTimeoutHandler to trigger the timeout.	null	false	MEDIUM
camel.component.netty.clientInitializerFactory	To use a custom ClientInitializerFactory	null	false	MEDIUM
camel.component.netty.correlationManager	To use a custom correlation manager to manage how request and reply messages are mapped when using request/reply with the netty producer. This should only be used if you have a way to map requests together with replies such as if there is correlation ids in both the request and reply messages. This can be used if you want to multiplex concurrent messages on the same channel (aka connection) in netty. When doing this you must have a way to correlate the request and reply messages so you can store the right reply on the inflight Camel Exchange before its continued routed. We recommend extending the TimeoutCorrelationManagerSupport when you build custom correlation managers. This provides support for timeout and other complexities you otherwise would need to implement as well. See also the producerPoolEnabled option for more details.	null	false	MEDIUM
camel.component.netty.lazyChannelCreation	Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.	true	false	MEDIUM
camel.component.netty.producerPoolEnabled	Whether producer pool is enabled or not. Important: If you turn this off then a single shared connection is used for the producer, also if you are doing request/reply. That means there is a potential issue with interleaved responses if replies comes back out-of-order. Therefore you need to have a correlation id in both the request and reply messages so you can properly correlate the replies to the Camel callback that is responsible for continue processing the message in Camel. To do this you need to implement NettyCamelStateCorrelationManager as correlation manager and configure it via the correlationManager option. See also the correlationManager option for more details.	true	false	MEDIUM
camel.component.netty.producerPoolMaxActive	Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.	-1	false	MEDIUM
camel.component.netty.producerPoolMaxIdle	Sets the cap on the number of idle instances in the pool.	100	false	MEDIUM
camel.component.netty.producerPoolMinEvictableIdle	Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.	300000L	false	MEDIUM
camel.component.netty.producerPoolMinIdle	Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.	null	false	MEDIUM
camel.component.netty.udpConnectionlessSending	This option supports connection less udp sending which is a real fire and forget. A connected udp send receive the PortUnreachableException if no one is listen on the receiving port.	false	false	MEDIUM
camel.component.netty.useByteBuf	If the useByteBuf is true, netty producer will turn the message body into ByteBuf before sending it out.	false	false	MEDIUM
camel.component.netty.allowSerializedHeaders	Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.	false	false	MEDIUM
camel.component.netty.autowiredEnabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	false	MEDIUM
camel.component.netty.channelGroup	To use a explicit ChannelGroup.	null	false	MEDIUM
camel.component.netty.nativeTransport	Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html	false	false	MEDIUM
camel.component.netty.options	Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.	null	false	MEDIUM
camel.component.netty.receiveBufferSize	The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.	65536	false	MEDIUM
camel.component.netty.receiveBufferSizePredictor	Configures the buffer size predictor. See details at Jetty documentation and this mail thread.	null	false	MEDIUM
camel.component.netty.sendBufferSize	The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.	65536	false	MEDIUM
camel.component.netty.transferExchange	Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.	false	false	MEDIUM
camel.component.netty.udpByteArrayCodec	For UDP only. If enabled the using byte array codec instead of Java serialization protocol.	false	false	MEDIUM
camel.component.netty.workerCount	When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.	null	false	MEDIUM
camel.component.netty.workerGroup	To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads.	null	false	MEDIUM
camel.component.netty.allowDefaultCodec	The netty component installs a default codec if both, encoder/decoder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain.	true	false	MEDIUM
camel.component.netty.autoAppendDelimiter	Whether or not to auto append missing end delimiter when sending using the textline codec.	true	false	MEDIUM
camel.component.netty.decoderMaxLineLength	The max line length to use for the textline codec.	1024	false	MEDIUM
camel.component.netty.decoders	A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.	null	false	MEDIUM
camel.component.netty.delimiter	The delimiter to use for the textline codec. Possible values are LINE and NULL. One of: [LINE] [NULL]	"LINE"	false	MEDIUM
camel.component.netty.encoders	A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.	null	false	MEDIUM
camel.component.netty.encoding	The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.	null	false	MEDIUM
camel.component.netty.textline	Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP - however only Strings are allowed to be serialized by default.	false	false	MEDIUM
camel.component.netty.enabledProtocols	Which protocols to enable when using SSL	"TLSv1,TLSv1.1,TLSv1.2"	false	MEDIUM
camel.component.netty.keyStoreFile	Client side certificate keystore to be used for encryption	null	false	MEDIUM
camel.component.netty.keyStoreFormat	Keystore format to be used for payload encryption. Defaults to JKS if not set	null	false	MEDIUM
camel.component.netty.keyStoreResource	Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.	null	false	MEDIUM
camel.component.netty.passphrase	Password setting to use in order to encrypt/decrypt payloads sent using SSH	null	false	MEDIUM
camel.component.netty.securityProvider	Security provider to be used for payload encryption. Defaults to SunX509 if not set.	null	false	MEDIUM
camel.component.netty.ssl	Setting to specify whether SSL encryption is applied to this endpoint	false	false	MEDIUM
camel.component.netty.sslClientCertHeaders	When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.	false	false	MEDIUM
camel.component.netty.sslContextParameters	To configure security using SSLContextParameters	null	false	MEDIUM
camel.component.netty.sslHandler	Reference to a class that could be used to return an SSL Handler	null	false	MEDIUM
camel.component.netty.trustStoreFile	Server side certificate keystore to be used for encryption	null	false	MEDIUM
camel.component.netty.trustStoreResource	Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.	null	false	MEDIUM
camel.component.netty.useGlobalSslContext Parameters	Enable usage of global SSL context parameters.	false	false	MEDIUM

Name

Description

Default

Required

Priority

camel.sink.path.protocol

The protocol to use which can be tcp or udp. One of: [tcp] [udp]

null

true

HIGH

camel.sink.path.host

The hostname. For the consumer the hostname is localhost or 0.0.0.0. For the producer the hostname is the remote host to connect to

null

true

HIGH

camel.sink.path.port

The host port number

null

true

HIGH

camel.sink.endpoint.disconnect

Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.

false

MEDIUM

camel.sink.endpoint.keepAlive

Setting to ensure socket is not closed due to inactivity

true

false

MEDIUM

camel.sink.endpoint.reuseAddress

Setting to facilitate socket multiplexing

true

false

MEDIUM

camel.sink.endpoint.reuseChannel

This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.

false

MEDIUM

camel.sink.endpoint.sync

Setting to set endpoint as one-way or request-response

true

false

MEDIUM

camel.sink.endpoint.tcpNoDelay

Setting to improve TCP protocol performance

true

false

MEDIUM

camel.sink.endpoint.connectTimeout

Time to wait for a socket connection to be available. Value is in milliseconds.

10000

false

MEDIUM

camel.sink.endpoint.lazyStartProducer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

MEDIUM

camel.sink.endpoint.requestTimeout

Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds, so eg 30000 is 30 seconds. The requestTimeout is using Netty’s ReadTimeoutHandler to trigger the timeout.

null

false

MEDIUM

camel.sink.endpoint.clientInitializerFactory

To use a custom ClientInitializerFactory

null

false

MEDIUM

camel.sink.endpoint.correlationManager

To use a custom correlation manager to manage how request and reply messages are mapped when using request/reply with the netty producer. This should only be used if you have a way to map requests together with replies such as if there is correlation ids in both the request and reply messages. This can be used if you want to multiplex concurrent messages on the same channel (aka connection) in netty. When doing this you must have a way to correlate the request and reply messages so you can store the right reply on the inflight Camel Exchange before its continued routed. We recommend extending the TimeoutCorrelationManagerSupport when you build custom correlation managers. This provides support for timeout and other complexities you otherwise would need to implement as well. See also the producerPoolEnabled option for more details.

null

false

MEDIUM

camel.sink.endpoint.lazyChannelCreation

Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.

true

false

MEDIUM

camel.sink.endpoint.producerPoolEnabled

Whether producer pool is enabled or not. Important: If you turn this off then a single shared connection is used for the producer, also if you are doing request/reply. That means there is a potential issue with interleaved responses if replies comes back out-of-order. Therefore you need to have a correlation id in both the request and reply messages so you can properly correlate the replies to the Camel callback that is responsible for continue processing the message in Camel. To do this you need to implement NettyCamelStateCorrelationManager as correlation manager and configure it via the correlationManager option. See also the correlationManager option for more details.

true

false

MEDIUM

camel.sink.endpoint.producerPoolMaxActive

Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.

-1

false

MEDIUM

camel.sink.endpoint.producerPoolMaxIdle

Sets the cap on the number of idle instances in the pool.

100

false

MEDIUM

camel.sink.endpoint.producerPoolMinEvictableIdle

Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.

300000L

false

MEDIUM

camel.sink.endpoint.producerPoolMinIdle

Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.

null

false

MEDIUM

camel.sink.endpoint.udpConnectionlessSending

This option supports connection less udp sending which is a real fire and forget. A connected udp send receive the PortUnreachableException if no one is listen on the receiving port.

false

MEDIUM

camel.sink.endpoint.useByteBuf

If the useByteBuf is true, netty producer will turn the message body into ByteBuf before sending it out.

false

MEDIUM

camel.sink.endpoint.allowSerializedHeaders

Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.

false

MEDIUM

camel.sink.endpoint.channelGroup

To use a explicit ChannelGroup.

null

false

MEDIUM

camel.sink.endpoint.nativeTransport

Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html

false

MEDIUM

camel.sink.endpoint.options

Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.

null

false

MEDIUM

camel.sink.endpoint.receiveBufferSize

The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.

65536

false

MEDIUM

camel.sink.endpoint.receiveBufferSizePredictor

Configures the buffer size predictor. See details at Jetty documentation and this mail thread.

null

false

MEDIUM

camel.sink.endpoint.sendBufferSize

The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.

65536

false

MEDIUM

camel.sink.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.sink.endpoint.transferExchange

Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.

false

MEDIUM

camel.sink.endpoint.udpByteArrayCodec

For UDP only. If enabled the using byte array codec instead of Java serialization protocol.

false

MEDIUM

camel.sink.endpoint.workerCount

When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.

null

false

MEDIUM

camel.sink.endpoint.workerGroup

To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads.

null

false

MEDIUM

camel.sink.endpoint.allowDefaultCodec

The netty component installs a default codec if both, encoder/decoder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain.

true

false

MEDIUM

camel.sink.endpoint.autoAppendDelimiter

Whether or not to auto append missing end delimiter when sending using the textline codec.

true

false

MEDIUM

camel.sink.endpoint.decoderMaxLineLength

The max line length to use for the textline codec.

1024

false

MEDIUM

camel.sink.endpoint.decoders

A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

null

false

MEDIUM

camel.sink.endpoint.delimiter

The delimiter to use for the textline codec. Possible values are LINE and NULL. One of: [LINE] [NULL]

"LINE"

false

MEDIUM

camel.sink.endpoint.encoders

A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

null

false

MEDIUM

camel.sink.endpoint.encoding

The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.

null

false

MEDIUM

camel.sink.endpoint.textline

Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP - however only Strings are allowed to be serialized by default.

false

MEDIUM

camel.sink.endpoint.enabledProtocols

Which protocols to enable when using SSL

"TLSv1,TLSv1.1,TLSv1.2"

false

MEDIUM

camel.sink.endpoint.keyStoreFile

Client side certificate keystore to be used for encryption

null

false

MEDIUM

camel.sink.endpoint.keyStoreFormat

Keystore format to be used for payload encryption. Defaults to JKS if not set

null

false

MEDIUM

camel.sink.endpoint.keyStoreResource

Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

null

false

MEDIUM

camel.sink.endpoint.passphrase

Password setting to use in order to encrypt/decrypt payloads sent using SSH

null

false

MEDIUM

camel.sink.endpoint.securityProvider

Security provider to be used for payload encryption. Defaults to SunX509 if not set.

null

false

MEDIUM

camel.sink.endpoint.ssl

Setting to specify whether SSL encryption is applied to this endpoint

false

MEDIUM

camel.sink.endpoint.sslClientCertHeaders

When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.

false

MEDIUM

camel.sink.endpoint.sslContextParameters

To configure security using SSLContextParameters

null

false

MEDIUM

camel.sink.endpoint.sslHandler

Reference to a class that could be used to return an SSL Handler

null

false

MEDIUM

camel.sink.endpoint.trustStoreFile

Server side certificate keystore to be used for encryption

null

false

MEDIUM

camel.sink.endpoint.trustStoreResource

Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

null

false

MEDIUM

camel.component.netty.configuration

To use the NettyConfiguration as configuration when creating endpoints.

null

false

MEDIUM

camel.component.netty.disconnect

Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.

false

MEDIUM

camel.component.netty.keepAlive

Setting to ensure socket is not closed due to inactivity

true

false

MEDIUM

camel.component.netty.reuseAddress

Setting to facilitate socket multiplexing

true

false

MEDIUM

camel.component.netty.reuseChannel

false

MEDIUM

camel.component.netty.sync

Setting to set endpoint as one-way or request-response

true

false

MEDIUM

camel.component.netty.tcpNoDelay

Setting to improve TCP protocol performance

true

false

MEDIUM

camel.component.netty.connectTimeout

Time to wait for a socket connection to be available. Value is in milliseconds.

10000

false

MEDIUM

camel.component.netty.lazyStartProducer

false

MEDIUM

camel.component.netty.requestTimeout

null

false

MEDIUM

camel.component.netty.clientInitializerFactory

To use a custom ClientInitializerFactory

null

false

MEDIUM

camel.component.netty.correlationManager

null

false

MEDIUM

camel.component.netty.lazyChannelCreation

Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.

true

false

MEDIUM

camel.component.netty.producerPoolEnabled

true

false

MEDIUM

camel.component.netty.producerPoolMaxActive

Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.

-1

false

MEDIUM

camel.component.netty.producerPoolMaxIdle

Sets the cap on the number of idle instances in the pool.

100

false

MEDIUM

camel.component.netty.producerPoolMinEvictableIdle

Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.

300000L

false

MEDIUM

camel.component.netty.producerPoolMinIdle

Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.

null

false

MEDIUM

camel.component.netty.udpConnectionlessSending

This option supports connection less udp sending which is a real fire and forget. A connected udp send receive the PortUnreachableException if no one is listen on the receiving port.

false

MEDIUM

camel.component.netty.useByteBuf

If the useByteBuf is true, netty producer will turn the message body into ByteBuf before sending it out.

false

MEDIUM

camel.component.netty.allowSerializedHeaders

false

MEDIUM

camel.component.netty.autowiredEnabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

false

MEDIUM

camel.component.netty.channelGroup

To use a explicit ChannelGroup.

null

false

MEDIUM

camel.component.netty.nativeTransport

false

MEDIUM

camel.component.netty.options

null

false

MEDIUM

camel.component.netty.receiveBufferSize

The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.

65536

false

MEDIUM

camel.component.netty.receiveBufferSizePredictor

Configures the buffer size predictor. See details at Jetty documentation and this mail thread.

null

false

MEDIUM

camel.component.netty.sendBufferSize

The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.

65536

false

MEDIUM

camel.component.netty.transferExchange

false

MEDIUM

camel.component.netty.udpByteArrayCodec

For UDP only. If enabled the using byte array codec instead of Java serialization protocol.

false

MEDIUM

camel.component.netty.workerCount

When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.

null

false

MEDIUM

camel.component.netty.workerGroup

null

false

MEDIUM

camel.component.netty.allowDefaultCodec

true

false

MEDIUM

camel.component.netty.autoAppendDelimiter

Whether or not to auto append missing end delimiter when sending using the textline codec.

true

false

MEDIUM

camel.component.netty.decoderMaxLineLength

The max line length to use for the textline codec.

1024

false

MEDIUM

camel.component.netty.decoders

null

false

MEDIUM

camel.component.netty.delimiter

The delimiter to use for the textline codec. Possible values are LINE and NULL. One of: [LINE] [NULL]

"LINE"

false

MEDIUM

camel.component.netty.encoders

null

false

MEDIUM

camel.component.netty.encoding

The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.

null

false

MEDIUM

camel.component.netty.textline

false

MEDIUM

camel.component.netty.enabledProtocols

Which protocols to enable when using SSL

"TLSv1,TLSv1.1,TLSv1.2"

false

MEDIUM

camel.component.netty.keyStoreFile

Client side certificate keystore to be used for encryption

null

false

MEDIUM

camel.component.netty.keyStoreFormat

Keystore format to be used for payload encryption. Defaults to JKS if not set

null

false

MEDIUM

camel.component.netty.keyStoreResource

Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

null

false

MEDIUM

camel.component.netty.passphrase

Password setting to use in order to encrypt/decrypt payloads sent using SSH

null

false

MEDIUM

camel.component.netty.securityProvider

Security provider to be used for payload encryption. Defaults to SunX509 if not set.

null

false

MEDIUM

camel.component.netty.ssl

Setting to specify whether SSL encryption is applied to this endpoint

false

MEDIUM

camel.component.netty.sslClientCertHeaders

false

MEDIUM

camel.component.netty.sslContextParameters

To configure security using SSLContextParameters

null

false

MEDIUM

camel.component.netty.sslHandler

Reference to a class that could be used to return an SSL Handler

null

false

MEDIUM

camel.component.netty.trustStoreFile

Server side certificate keystore to be used for encryption

null

false

MEDIUM

camel.component.netty.trustStoreResource

Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

null

false

MEDIUM

camel.component.netty.useGlobalSslContext Parameters

Enable usage of global SSL context parameters.

false

MEDIUM

The camel-netty sink connector has no converters out of the box.

The camel-netty sink connector has no transforms out of the box.

The camel-netty sink connector has no aggregation strategies out of the box.