camel-spring-redis-kafka-connector source configuration

When using camel-spring-redis-kafka-connector as source make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-spring-redis-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Source connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.springredis.CamelSpringredisSourceConnector

The camel-spring-redis source connector supports 14 options, which are listed below.

Name	Description	Default	Required	Priority
camel.source.path.host	The host where Redis server is running.	null	true	HIGH
camel.source.path.port	Redis server port number	null	true	HIGH
camel.source.endpoint.channels	List of topic names or name patterns to subscribe to. Multiple names can be separated by comma.	null	false	MEDIUM
camel.source.endpoint.command	Default command, which can be overridden by message header. Notice the consumer only supports the following commands: PSUBSCRIBE and SUBSCRIBE One of: [PING] [SET] [GET] [QUIT] [EXISTS] [DEL] [TYPE] [FLUSHDB] [KEYS] [RANDOMKEY] [RENAME] [RENAMENX] [RENAMEX] [DBSIZE] [EXPIRE] [EXPIREAT] [TTL] [SELECT] [MOVE] [FLUSHALL] [GETSET] [MGET] [SETNX] [SETEX] [MSET] [MSETNX] [DECRBY] [DECR] [INCRBY] [INCR] [APPEND] [SUBSTR] [HSET] [HGET] [HSETNX] [HMSET] [HMGET] [HINCRBY] [HEXISTS] [HDEL] [HLEN] [HKEYS] [HVALS] [HGETALL] [RPUSH] [LPUSH] [LLEN] [LRANGE] [LTRIM] [LINDEX] [LSET] [LREM] [LPOP] [RPOP] [RPOPLPUSH] [SADD] [SMEMBERS] [SREM] [SPOP] [SMOVE] [SCARD] [SISMEMBER] [SINTER] [SINTERSTORE] [SUNION] [SUNIONSTORE] [SDIFF] [SDIFFSTORE] [SRANDMEMBER] [ZADD] [ZRANGE] [ZREM] [ZINCRBY] [ZRANK] [ZREVRANK] [ZREVRANGE] [ZCARD] [ZSCORE] [MULTI] [DISCARD] [EXEC] [WATCH] [UNWATCH] [SORT] [BLPOP] [BRPOP] [AUTH] [SUBSCRIBE] [PUBLISH] [UNSUBSCRIBE] [PSUBSCRIBE] [PUNSUBSCRIBE] [ZCOUNT] [ZRANGEBYSCORE] [ZREVRANGEBYSCORE] [ZREMRANGEBYRANK] [ZREMRANGEBYSCORE] [ZUNIONSTORE] [ZINTERSTORE] [SAVE] [BGSAVE] [BGREWRITEAOF] [LASTSAVE] [SHUTDOWN] [INFO] [MONITOR] [SLAVEOF] [CONFIG] [STRLEN] [SYNC] [LPUSHX] [PERSIST] [RPUSHX] [ECHO] [LINSERT] [DEBUG] [BRPOPLPUSH] [SETBIT] [GETBIT] [SETRANGE] [GETRANGE] [PEXPIRE] [PEXPIREAT] [GEOADD] [GEODIST] [GEOHASH] [GEOPOS] [GEORADIUS] [GEORADIUSBYMEMBER]	"SET"	false	MEDIUM
camel.source.endpoint.connectionFactory	Reference to a pre-configured RedisConnectionFactory instance to use.	null	false	MEDIUM
camel.source.endpoint.redisTemplate	Reference to a pre-configured RedisTemplate instance to use.	null	false	MEDIUM
camel.source.endpoint.serializer	Reference to a pre-configured RedisSerializer instance to use.	null	false	MEDIUM
camel.source.endpoint.bridgeErrorHandler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	false	MEDIUM
camel.source.endpoint.exceptionHandler	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.	null	false	MEDIUM
camel.source.endpoint.exchangePattern	Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]	null	false	MEDIUM
camel.source.endpoint.listenerContainer	Reference to a pre-configured RedisMessageListenerContainer instance to use.	null	false	MEDIUM
camel.source.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	false	MEDIUM
camel.component.spring-redis.bridgeErrorHandler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	false	MEDIUM
camel.component.spring-redis.autowiredEnabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	false	MEDIUM

Name

Description

Default

Required

Priority

camel.source.path.host

The host where Redis server is running.

null

true

HIGH

camel.source.path.port

Redis server port number

null

true

HIGH

camel.source.endpoint.channels

List of topic names or name patterns to subscribe to. Multiple names can be separated by comma.

null

false

MEDIUM

camel.source.endpoint.command

Default command, which can be overridden by message header. Notice the consumer only supports the following commands: PSUBSCRIBE and SUBSCRIBE One of: [PING] [SET] [GET] [QUIT] [EXISTS] [DEL] [TYPE] [FLUSHDB] [KEYS] [RANDOMKEY] [RENAME] [RENAMENX] [RENAMEX] [DBSIZE] [EXPIRE] [EXPIREAT] [TTL] [SELECT] [MOVE] [FLUSHALL] [GETSET] [MGET] [SETNX] [SETEX] [MSET] [MSETNX] [DECRBY] [DECR] [INCRBY] [INCR] [APPEND] [SUBSTR] [HSET] [HGET] [HSETNX] [HMSET] [HMGET] [HINCRBY] [HEXISTS] [HDEL] [HLEN] [HKEYS] [HVALS] [HGETALL] [RPUSH] [LPUSH] [LLEN] [LRANGE] [LTRIM] [LINDEX] [LSET] [LREM] [LPOP] [RPOP] [RPOPLPUSH] [SADD] [SMEMBERS] [SREM] [SPOP] [SMOVE] [SCARD] [SISMEMBER] [SINTER] [SINTERSTORE] [SUNION] [SUNIONSTORE] [SDIFF] [SDIFFSTORE] [SRANDMEMBER] [ZADD] [ZRANGE] [ZREM] [ZINCRBY] [ZRANK] [ZREVRANK] [ZREVRANGE] [ZCARD] [ZSCORE] [MULTI] [DISCARD] [EXEC] [WATCH] [UNWATCH] [SORT] [BLPOP] [BRPOP] [AUTH] [SUBSCRIBE] [PUBLISH] [UNSUBSCRIBE] [PSUBSCRIBE] [PUNSUBSCRIBE] [ZCOUNT] [ZRANGEBYSCORE] [ZREVRANGEBYSCORE] [ZREMRANGEBYRANK] [ZREMRANGEBYSCORE] [ZUNIONSTORE] [ZINTERSTORE] [SAVE] [BGSAVE] [BGREWRITEAOF] [LASTSAVE] [SHUTDOWN] [INFO] [MONITOR] [SLAVEOF] [CONFIG] [STRLEN] [SYNC] [LPUSHX] [PERSIST] [RPUSHX] [ECHO] [LINSERT] [DEBUG] [BRPOPLPUSH] [SETBIT] [GETBIT] [SETRANGE] [GETRANGE] [PEXPIRE] [PEXPIREAT] [GEOADD] [GEODIST] [GEOHASH] [GEOPOS] [GEORADIUS] [GEORADIUSBYMEMBER]

"SET"

false

MEDIUM

camel.source.endpoint.connectionFactory

Reference to a pre-configured RedisConnectionFactory instance to use.

null

false

MEDIUM

camel.source.endpoint.redisTemplate

Reference to a pre-configured RedisTemplate instance to use.

null

false

MEDIUM

camel.source.endpoint.serializer

Reference to a pre-configured RedisSerializer instance to use.

null

false

MEDIUM

camel.source.endpoint.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

null

false

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]

null

false

MEDIUM

camel.source.endpoint.listenerContainer

Reference to a pre-configured RedisMessageListenerContainer instance to use.

null

false

MEDIUM

camel.source.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.component.spring-redis.bridgeErrorHandler

false

MEDIUM

camel.component.spring-redis.autowiredEnabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

false

MEDIUM

The camel-spring-redis source connector has no converters out of the box.

The camel-spring-redis source connector has no transforms out of the box.

The camel-spring-redis source connector has no aggregation strategies out of the box.