camel-netty-http-kafka-connector source configuration

camel.source.path.protocol

The protocol to use which is either http, https or proxy - a consumer only option. One of: [http] [https]

true

HIGH

camel.source.path.host

The local hostname such as localhost, or 0.0.0.0 when being a consumer. The remote HTTP server hostname when using producer.

true

HIGH

camel.source.path.port

The host port number

false

MEDIUM

camel.source.path.path

Resource path

false

MEDIUM

camel.source.endpoint.bridgeEndpoint

If the option is true, the producer will ignore the Exchange.HTTP_URI header, and use the endpoint’s URI for request. You may also set the throwExceptionOnFailure to be false to let the producer send all the fault response back. The consumer working in the bridge mode will skip the gzip compression and WWW URL form encoding (by adding the Exchange.SKIP_GZIP_ENCODING and Exchange.SKIP_WWW_FORM_URLENCODED headers to the consumed exchange).

false

MEDIUM

camel.source.endpoint.disconnect

Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.

false

MEDIUM

camel.source.endpoint.keepAlive

Setting to ensure socket is not closed due to inactivity

false

MEDIUM

camel.source.endpoint.reuseAddress

Setting to facilitate socket multiplexing

false

MEDIUM

camel.source.endpoint.reuseChannel

This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.

false

MEDIUM

camel.source.endpoint.sync

Setting to set endpoint as one-way or request-response

false

MEDIUM

camel.source.endpoint.tcpNoDelay

Setting to improve TCP protocol performance

false

MEDIUM

camel.source.endpoint.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.source.endpoint.matchOnUriPrefix

Whether or not Camel should try to find a target consumer by matching the URI prefix if no exact match is found.

false

MEDIUM

camel.source.endpoint.muteException

If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.

false

MEDIUM

camel.source.endpoint.send503whenSuspended

Whether to send back HTTP status code 503 when the consumer has been suspended. If the option is false then the Netty Acceptor is unbound when the consumer is suspended, so clients cannot connect anymore.

false

MEDIUM

camel.source.endpoint.backlog

Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.

false

MEDIUM

camel.source.endpoint.bossCount

When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty

false

MEDIUM

camel.source.endpoint.bossGroup

Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint

false

MEDIUM

camel.source.endpoint.chunkedMaxContentLength

Value in bytes the max content length per chunked frame received on the Netty HTTP server.

false

MEDIUM

camel.source.endpoint.compression

Allow using gzip/deflate for compression on the Netty HTTP server if the client supports it from the HTTP headers.

false

MEDIUM

camel.source.endpoint.disconnectOnNoReply

If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.

false

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]

false

MEDIUM

camel.source.endpoint.httpMethodRestrict

To disable HTTP methods on the Netty HTTP consumer. You can specify multiple separated by comma.

false

MEDIUM

camel.source.endpoint.logWarnOnBadRequest

Whether Netty HTTP server should log a WARN if decoding the HTTP request failed and a HTTP Status 400 (bad request) is returned.

false

MEDIUM

camel.source.endpoint.mapHeaders

If this option is enabled, then during binding from Netty to Camel Message then the headers will be mapped as well (eg added as header to the Camel Message as well). You can turn off this option to disable this. The headers can still be accessed from the org.apache.camel.component.netty.http.NettyHttpMessage message with the method getHttpRequest() that returns the Netty HTTP request io.netty.handler.codec.http.HttpRequest instance.

false

MEDIUM

camel.source.endpoint.maxHeaderSize

The maximum length of all headers. If the sum of the length of each header exceeds this value, a io.netty.handler.codec.TooLongFrameException will be raised.

false

MEDIUM

camel.source.endpoint.nettyServerBootstrapFactory

To use a custom NettyServerBootstrapFactory

false

MEDIUM

camel.source.endpoint.nettySharedHttpServer

To use a shared Netty HTTP server. See Netty HTTP Server Example for more details.

false

MEDIUM

camel.source.endpoint.noReplyLogLevel

If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

false

MEDIUM

camel.source.endpoint.serverClosedChannelException CaughtLogLevel

If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

false

MEDIUM

camel.source.endpoint.serverExceptionCaughtLog Level

If the server (NettyConsumer) catches an exception then its logged using this logging level. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

false

MEDIUM

camel.source.endpoint.serverInitializerFactory

To use a custom ServerInitializerFactory

false

MEDIUM

camel.source.endpoint.traceEnabled

Specifies whether to enable HTTP TRACE for this Netty HTTP consumer. By default TRACE is turned off.

false

MEDIUM

camel.source.endpoint.urlDecodeHeaders

If this option is enabled, then during binding from Netty to Camel Message then the header values will be URL decoded (eg %20 will be a space character. Notice this option is used by the default org.apache.camel.component.netty.http.NettyHttpBinding and therefore if you implement a custom org.apache.camel.component.netty.http.NettyHttpBinding then you would need to decode the headers accordingly to this option.

false

MEDIUM

camel.source.endpoint.usingExecutorService

Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.

false

MEDIUM

camel.source.endpoint.hostnameVerification

To enable/disable hostname verification on SSLEngine

false

MEDIUM

camel.source.endpoint.allowSerializedHeaders

Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.

false

MEDIUM

camel.source.endpoint.channelGroup

To use a explicit ChannelGroup.

false

MEDIUM

camel.source.endpoint.configuration

To use a custom configured NettyHttpConfiguration for configuring this endpoint.

false

MEDIUM

camel.source.endpoint.disableStreamCache

Determines whether or not the raw input stream from Netty HttpRequest#getContent() or HttpResponset#getContent() is cached or not (Camel will read the stream into a in light-weight memory based Stream caching) cache. By default Camel will cache the Netty input stream to support reading it multiple times to ensure it Camel can retrieve all data from the stream. However you can set this option to true when you for example need to access the raw stream, such as streaming it directly to a file or other persistent store. Mind that if you enable this option, then you cannot read the Netty stream multiple times out of the box, and you would need manually to reset the reader index on the Netty raw stream. Also Netty will auto-close the Netty stream when the Netty HTTP server/HTTP client is done processing, which means that if the asynchronous routing engine is in use then any asynchronous thread that may continue routing the org.apache.camel.Exchange may not be able to read the Netty stream, because Netty has closed it.

false

MEDIUM

camel.source.endpoint.headerFilterStrategy

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter headers.

false

MEDIUM

camel.source.endpoint.nativeTransport

Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html

false

MEDIUM

camel.source.endpoint.nettyHttpBinding

To use a custom org.apache.camel.component.netty.http.NettyHttpBinding for binding to/from Netty and Camel Message API.

false

MEDIUM

camel.source.endpoint.options

Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.

false

MEDIUM

camel.source.endpoint.receiveBufferSize

The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.

false

MEDIUM

camel.source.endpoint.receiveBufferSizePredictor

Configures the buffer size predictor. See details at Jetty documentation and this mail thread.

false

MEDIUM

camel.source.endpoint.sendBufferSize

The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.

false

MEDIUM

camel.source.endpoint.synchronous

Sets whether synchronous processing should be strictly used

false

MEDIUM

camel.source.endpoint.transferException

If enabled and an Exchange failed processing on the consumer side, and if the caused Exception was send back serialized in the response as a application/x-java-serialized-object content type. On the producer side the exception will be deserialized and thrown as is, instead of the HttpOperationFailedException. The caused exception is required to be serialized. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.

false

MEDIUM

camel.source.endpoint.transferExchange

Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.

false

MEDIUM

camel.source.endpoint.workerCount

When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.

false

MEDIUM

camel.source.endpoint.workerGroup

To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads.

false

MEDIUM

camel.source.endpoint.decoders

A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

false

MEDIUM

camel.source.endpoint.encoders

A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

false

MEDIUM

camel.source.endpoint.enabledProtocols

Which protocols to enable when using SSL

false

MEDIUM

camel.source.endpoint.keyStoreFile

Client side certificate keystore to be used for encryption

false

MEDIUM

camel.source.endpoint.keyStoreFormat

Keystore format to be used for payload encryption. Defaults to JKS if not set

false

MEDIUM

camel.source.endpoint.keyStoreResource

Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

false

MEDIUM

camel.source.endpoint.needClientAuth

Configures whether the server needs client authentication when using SSL.

false

MEDIUM

camel.source.endpoint.passphrase

Password setting to use in order to encrypt/decrypt payloads sent using SSH

false

MEDIUM

camel.source.endpoint.securityConfiguration

Refers to a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration for configuring secure web resources.

false

MEDIUM

camel.source.endpoint.securityOptions

To configure NettyHttpSecurityConfiguration using key/value pairs from the map

false

MEDIUM

camel.source.endpoint.securityProvider

Security provider to be used for payload encryption. Defaults to SunX509 if not set.

false

MEDIUM

camel.source.endpoint.ssl

Setting to specify whether SSL encryption is applied to this endpoint

false

MEDIUM

camel.source.endpoint.sslClientCertHeaders

When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.

false

MEDIUM

camel.source.endpoint.sslContextParameters

To configure security using SSLContextParameters

false

MEDIUM

camel.source.endpoint.sslHandler

Reference to a class that could be used to return an SSL Handler

false

MEDIUM

camel.source.endpoint.trustStoreFile

Server side certificate keystore to be used for encryption

false

MEDIUM

camel.source.endpoint.trustStoreResource

Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

false

MEDIUM

camel.component.netty-http.configuration

To use the NettyConfiguration as configuration when creating endpoints.

false

MEDIUM

camel.component.netty-http.disconnect

Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.

false

MEDIUM

camel.component.netty-http.keepAlive

Setting to ensure socket is not closed due to inactivity

false

MEDIUM

camel.component.netty-http.reuseAddress

Setting to facilitate socket multiplexing

false

MEDIUM

camel.component.netty-http.reuseChannel

This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.

false

MEDIUM

camel.component.netty-http.sync

Setting to set endpoint as one-way or request-response

false

MEDIUM

camel.component.netty-http.tcpNoDelay

Setting to improve TCP protocol performance

false

MEDIUM

camel.component.netty-http.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.component.netty-http.broadcast

Setting to choose Multicast over UDP

false

MEDIUM

camel.component.netty-http.clientMode

If the clientMode is true, netty consumer will connect the address as a TCP client.

false

MEDIUM

camel.component.netty-http.reconnect

Used only in clientMode in consumer, the consumer will attempt to reconnect on disconnection if this is enabled

false

MEDIUM

camel.component.netty-http.reconnectInterval

Used if reconnect and clientMode is enabled. The interval in milli seconds to attempt reconnection

false

MEDIUM

camel.component.netty-http.backlog

Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.

false

MEDIUM

camel.component.netty-http.bossCount

When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty

false

MEDIUM

camel.component.netty-http.bossGroup

Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint

false

MEDIUM

camel.component.netty-http.disconnectOnNoReply

If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.

false

MEDIUM

camel.component.netty-http.executorService

To use the given EventExecutorGroup.

false

MEDIUM

camel.component.netty-http.maximumPoolSize

Sets a maximum thread pool size for the netty consumer ordered thread pool. The default size is 2 x cpu_core plus 1. Setting this value to eg 10 will then use 10 threads unless 2 x cpu_core plus 1 is a higher value, which then will override and be used. For example if there are 8 cores, then the consumer thread pool will be 17. This thread pool is used to route messages received from Netty by Camel. We use a separate thread pool to ensure ordering of messages and also in case some messages will block, then nettys worker threads (event loop) wont be affected.

false

MEDIUM

camel.component.netty-http.nettyServerBootstrap Factory

To use a custom NettyServerBootstrapFactory

false

MEDIUM

camel.component.netty-http.networkInterface

When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group.

false

MEDIUM

camel.component.netty-http.noReplyLogLevel

If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

false

MEDIUM

camel.component.netty-http.serverClosedChannel ExceptionCaughtLogLevel

If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

false

MEDIUM

camel.component.netty-http.serverExceptionCaught LogLevel

If the server (NettyConsumer) catches an exception then its logged using this logging level. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

false

MEDIUM

camel.component.netty-http.serverInitializer Factory

To use a custom ServerInitializerFactory

false

MEDIUM

camel.component.netty-http.usingExecutorService

Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.

false

MEDIUM

camel.component.netty-http.hostnameVerification

To enable/disable hostname verification on SSLEngine

false

MEDIUM

camel.component.netty-http.allowSerializedHeaders

Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.

false

MEDIUM

camel.component.netty-http.autowiredEnabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

false

MEDIUM

camel.component.netty-http.channelGroup

To use a explicit ChannelGroup.

false

MEDIUM

camel.component.netty-http.headerFilterStrategy

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter headers.

false

MEDIUM

camel.component.netty-http.nativeTransport

Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html

false

MEDIUM

camel.component.netty-http.nettyHttpBinding

To use a custom org.apache.camel.component.netty.http.NettyHttpBinding for binding to/from Netty and Camel Message API.

false

MEDIUM

camel.component.netty-http.options

Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.

false

MEDIUM

camel.component.netty-http.receiveBufferSize

The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.

false

MEDIUM

camel.component.netty-http.receiveBufferSize Predictor

Configures the buffer size predictor. See details at Jetty documentation and this mail thread.

false

MEDIUM

camel.component.netty-http.sendBufferSize

The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.

false

MEDIUM

camel.component.netty-http.transferExchange

Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.

false

MEDIUM

camel.component.netty-http.udpByteArrayCodec

For UDP only. If enabled the using byte array codec instead of Java serialization protocol.

false

MEDIUM

camel.component.netty-http.workerCount

When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.

false

MEDIUM

camel.component.netty-http.workerGroup

To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads.

false

MEDIUM

camel.component.netty-http.allowDefaultCodec

The netty component installs a default codec if both, encoder/decoder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain.

false

MEDIUM

camel.component.netty-http.autoAppendDelimiter

Whether or not to auto append missing end delimiter when sending using the textline codec.

false

MEDIUM

camel.component.netty-http.decoderMaxLineLength

The max line length to use for the textline codec.

false

MEDIUM

camel.component.netty-http.decoders

A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

false

MEDIUM

camel.component.netty-http.delimiter

The delimiter to use for the textline codec. Possible values are LINE and NULL. One of: [LINE] [NULL]

false

MEDIUM

camel.component.netty-http.encoders

A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

false

MEDIUM

camel.component.netty-http.encoding

The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.

false

MEDIUM

camel.component.netty-http.textline

Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP - however only Strings are allowed to be serialized by default.

false

MEDIUM

camel.component.netty-http.enabledProtocols

Which protocols to enable when using SSL

false

MEDIUM

camel.component.netty-http.keyStoreFile

Client side certificate keystore to be used for encryption

false

MEDIUM

camel.component.netty-http.keyStoreFormat

Keystore format to be used for payload encryption. Defaults to JKS if not set

false

MEDIUM

camel.component.netty-http.keyStoreResource

Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

false

MEDIUM

camel.component.netty-http.needClientAuth

Configures whether the server needs client authentication when using SSL.

false

MEDIUM

camel.component.netty-http.passphrase

Password setting to use in order to encrypt/decrypt payloads sent using SSH

false

MEDIUM

camel.component.netty-http.securityConfiguration

Refers to a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration for configuring secure web resources.

false

MEDIUM

camel.component.netty-http.securityProvider

Security provider to be used for payload encryption. Defaults to SunX509 if not set.

false

MEDIUM

camel.component.netty-http.ssl

Setting to specify whether SSL encryption is applied to this endpoint

false

MEDIUM

camel.component.netty-http.sslClientCertHeaders

When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.

false

MEDIUM

camel.component.netty-http.sslContextParameters

To configure security using SSLContextParameters

false

MEDIUM

camel.component.netty-http.sslHandler

Reference to a class that could be used to return an SSL Handler

false

MEDIUM

camel.component.netty-http.trustStoreFile

Server side certificate keystore to be used for encryption

false

MEDIUM

camel.component.netty-http.trustStoreResource

Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

false

MEDIUM

camel.component.netty-http.useGlobalSslContext Parameters

Enable usage of global SSL context parameters.

false

MEDIUM