Apache Camel helps you integrate over 300 different systems!

URI Format

aws-lambda://functionName[?options]

You can append query options to the URI in the following format, ?options=value&option2=value&…

URI Options

The AWS Lambda component supports 12 options, which are listed below.

Name	Description	Default	Type
autoDiscoverClient (common)	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	boolean
configuration (producer)	The AWS Lambda default configuration		LambdaConfiguration
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
operation (producer)	The operation to perform. It can be listFunctions, getFunction, createFunction, deleteFunction or invokeFunction. There are 18 enums and the value can be one of: listFunctions, getFunction, createAlias, deleteAlias, getAlias, listAliases, createFunction, deleteFunction, invokeFunction, updateFunction, createEventSourceMapping, deleteEventSourceMapping, listEventSourceMapping, listTags, tagResource, untagResource, publishVersion, listVersions	invokeFunction	LambdaOperations
region (producer)	Amazon AWS Region. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()		String
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
awsLambdaClient (advanced)	To use a existing configured AwsLambdaClient as client		AWSLambda
proxyHost (proxy)	To define a proxy host when instantiating the Lambda client		String
proxyPort (proxy)	To define a proxy port when instantiating the Lambda client		Integer
proxyProtocol (proxy)	To define a proxy protocol when instantiating the Lambda client. There are 2 enums and the value can be one of: HTTP, HTTPS	HTTPS	Protocol
accessKey (security)	Amazon AWS Access Key		String
secretKey (security)	Amazon AWS Secret Key		String

Name

Description

Default

Type

autoDiscoverClient (common)

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

boolean

configuration (producer)

The AWS Lambda default configuration

LambdaConfiguration

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

operation (producer)

The operation to perform. It can be listFunctions, getFunction, createFunction, deleteFunction or invokeFunction. There are 18 enums and the value can be one of: listFunctions, getFunction, createAlias, deleteAlias, getAlias, listAliases, createFunction, deleteFunction, invokeFunction, updateFunction, createEventSourceMapping, deleteEventSourceMapping, listEventSourceMapping, listTags, tagResource, untagResource, publishVersion, listVersions

invokeFunction

LambdaOperations

region (producer)

Amazon AWS Region. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()

String

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

awsLambdaClient (advanced)

To use a existing configured AwsLambdaClient as client

AWSLambda

proxyHost (proxy)

To define a proxy host when instantiating the Lambda client

String

proxyPort (proxy)

To define a proxy port when instantiating the Lambda client

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the Lambda client. There are 2 enums and the value can be one of: HTTP, HTTPS

HTTPS

Protocol

accessKey (security)

Amazon AWS Access Key

String

secretKey (security)

Amazon AWS Secret Key

String

The AWS Lambda endpoint is configured using URI syntax:

aws-lambda:function

with the following path and query parameters:

Path Parameters (1 parameters):

Name	Description	Default	Type
function	Required Name of the Lambda function.		String

Name

Description

Default

Type

function

Required Name of the Lambda function.

String

Query Parameters (11 parameters):

Name	Description	Default	Type
autoDiscoverClient (common)	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
operation (producer)	The operation to perform. It can be listFunctions, getFunction, createFunction, deleteFunction or invokeFunction. There are 18 enums and the value can be one of: listFunctions, getFunction, createAlias, deleteAlias, getAlias, listAliases, createFunction, deleteFunction, invokeFunction, updateFunction, createEventSourceMapping, deleteEventSourceMapping, listEventSourceMapping, listTags, tagResource, untagResource, publishVersion, listVersions	invokeFunction	LambdaOperations
region (producer)	Amazon AWS Region. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()		String
awsLambdaClient (advanced)	To use a existing configured AwsLambdaClient as client		AWSLambda
synchronous (advanced)	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	boolean
proxyHost (proxy)	To define a proxy host when instantiating the Lambda client		String
proxyPort (proxy)	To define a proxy port when instantiating the Lambda client		Integer
proxyProtocol (proxy)	To define a proxy protocol when instantiating the Lambda client. There are 2 enums and the value can be one of: HTTP, HTTPS	HTTPS	Protocol
accessKey (security)	Amazon AWS Access Key		String
secretKey (security)	Amazon AWS Secret Key		String

Name

Description

Default

Type

autoDiscoverClient (common)

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

operation (producer)

The operation to perform. It can be listFunctions, getFunction, createFunction, deleteFunction or invokeFunction. There are 18 enums and the value can be one of: listFunctions, getFunction, createAlias, deleteAlias, getAlias, listAliases, createFunction, deleteFunction, invokeFunction, updateFunction, createEventSourceMapping, deleteEventSourceMapping, listEventSourceMapping, listTags, tagResource, untagResource, publishVersion, listVersions

invokeFunction

LambdaOperations

region (producer)

Amazon AWS Region. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()

String

awsLambdaClient (advanced)

To use a existing configured AwsLambdaClient as client

AWSLambda

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

proxyHost (proxy)

To define a proxy host when instantiating the Lambda client

String

proxyPort (proxy)

To define a proxy port when instantiating the Lambda client

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the Lambda client. There are 2 enums and the value can be one of: HTTP, HTTPS

HTTPS

Protocol

accessKey (security)

Amazon AWS Access Key

String

secretKey (security)

Amazon AWS Secret Key

String

Required Lambda component options

You have to provide the awsLambdaClient in the Registry or your accessKey and secretKey to access the Amazon Lambda service.

Usage

Message headers evaluated by the Lambda producer

Operation Header Type Description Required

Operation	Header	Type	Description	Required
All	`CamelAwsLambdaOperation`	`String`	The operation we want to perform. Override operation passed as query parameter	Yes
createFunction	`CamelAwsLambdaS3Bucket`	`String`	Amazon S3 bucket name where the .zip file containing your deployment package is stored. This bucket must reside in the same AWS region where you are creating the Lambda function.	No
createFunction	`CamelAwsLambdaS3Key`	`String`	The Amazon S3 object (the deployment package) key name you want to upload.	No
createFunction	`CamelAwsLambdaS3ObjectVersion`	String	The Amazon S3 object (the deployment package) version you want to upload.	No
createFunction	`CamelAwsLambdaZipFile`	`String`	The local path of the zip file (the deployment package). Content of zip file can also be put in Message body.	No
createFunction	`CamelAwsLambdaRole`	`String`	The Amazon Resource Name (ARN) of the IAM role that Lambda assumes when it executes your function to access any other Amazon Web Services (AWS) resources.	Yes
createFunction	`CamelAwsLambdaRuntime`	String	The runtime environment for the Lambda function you are uploading. (nodejs, nodejs4.3, nodejs6.10, java8, python2.7, python3.6, dotnetcore1.0, odejs4.3-edge)	Yes
createFunction	`CamelAwsLambdaHandler`	`String`	The function within your code that Lambda calls to begin execution. For Node.js, it is the module-name.export value in your function. For Java, it can be package.class-name::handler or package.class-name.	Yes
createFunction	`CamelAwsLambdaDescription`	`String`	The user-provided description.	No
createFunction	`CamelAwsLambdaTargetArn`	`String`	The parent object that contains the target ARN (Amazon Resource Name) of an Amazon SQS queue or Amazon SNS topic.	No
createFunction	`CamelAwsLambdaMemorySize`	`Integer`	The memory size, in MB, you configured for the function. Must be a multiple of 64 MB.	No
createFunction	`CamelAwsLambdaKMSKeyArn`	`String`	The Amazon Resource Name (ARN) of the KMS key used to encrypt your function’s environment variables. If not provided, AWS Lambda will use a default service key.	No
createFunction	`CamelAwsLambdaPublish`	`Boolean`	This boolean parameter can be used to request AWS Lambda to create the Lambda function and publish a version as an atomic operation.	No
createFunction	`CamelAwsLambdaTimeout`	`Integer`	The function execution time at which Lambda should terminate the function. The default is 3 seconds.	No
createFunction	`CamelAwsLambdaTracingConfig`	`String`	Your function’s tracing settings (Active or PassThrough).	No
createFunction	`CamelAwsLambdaEnvironmentVariables`	`Map<String, String>`	The key-value pairs that represent your environment’s configuration settings.	No
createFunction	`CamelAwsLambdaEnvironmentTags`	`Map<String, String>`	The list of tags (key-value pairs) assigned to the new function.	No
createFunction	`CamelAwsLambdaSecurityGroupIds`	`List<String>`	If your Lambda function accesses resources in a VPC, a list of one or more security groups IDs in your VPC.	No
createFunction	`CamelAwsLambdaSubnetIds`	`List<String>`	If your Lambda function accesses resources in a VPC, a list of one or more subnet IDs in your VPC.	No
createAlias	`CamelAwsLambdaFunctionVersion`	`String`	The function version to set in the alias	Yes
createAlias	`CamelAwsLambdaAliasFunctionName`	`String`	The function name to set in the alias	Yes
createAlias	`CamelAwsLambdaAliasFunctionDescription`	`String`	The function description to set in the alias	No
deleteAlias	`CamelAwsLambdaAliasFunctionName`	`String`	The function name of the alias	Yes
getAlias	`CamelAwsLambdaAliasFunctionName`	`String`	The function name of the alias	Yes
listAliases	`CamelAwsLambdaFunctionVersion`	`String`	The function version to set in the alias	Yes

All

CamelAwsLambdaOperation

String

The operation we want to perform. Override operation passed as query parameter

Yes

createFunction

CamelAwsLambdaS3Bucket

String

Amazon S3 bucket name where the .zip file containing your deployment package is stored. This bucket must reside in the same AWS region where you are creating the Lambda function.

No

createFunction

CamelAwsLambdaS3Key

String

The Amazon S3 object (the deployment package) key name you want to upload.

No

createFunction

CamelAwsLambdaS3ObjectVersion

String

The Amazon S3 object (the deployment package) version you want to upload.

No

createFunction

CamelAwsLambdaZipFile

String

The local path of the zip file (the deployment package). Content of zip file can also be put in Message body.

No

createFunction

CamelAwsLambdaRole

String

The Amazon Resource Name (ARN) of the IAM role that Lambda assumes when it executes your function to access any other Amazon Web Services (AWS) resources.

Yes

createFunction

CamelAwsLambdaRuntime

String

The runtime environment for the Lambda function you are uploading. (nodejs, nodejs4.3, nodejs6.10, java8, python2.7, python3.6, dotnetcore1.0, odejs4.3-edge)

Yes

createFunction

CamelAwsLambdaHandler

String

The function within your code that Lambda calls to begin execution. For Node.js, it is the module-name.export value in your function. For Java, it can be package.class-name::handler or package.class-name.

Yes

createFunction

CamelAwsLambdaDescription

String

The user-provided description.

No

createFunction

CamelAwsLambdaTargetArn

String

The parent object that contains the target ARN (Amazon Resource Name) of an Amazon SQS queue or Amazon SNS topic.

No

createFunction

CamelAwsLambdaMemorySize

Integer

The memory size, in MB, you configured for the function. Must be a multiple of 64 MB.

No

createFunction

CamelAwsLambdaKMSKeyArn

String

The Amazon Resource Name (ARN) of the KMS key used to encrypt your function’s environment variables. If not provided, AWS Lambda will use a default service key.

No

createFunction

CamelAwsLambdaPublish

Boolean

This boolean parameter can be used to request AWS Lambda to create the Lambda function and publish a version as an atomic operation.

No

createFunction

CamelAwsLambdaTimeout

Integer

The function execution time at which Lambda should terminate the function. The default is 3 seconds.

No

createFunction

CamelAwsLambdaTracingConfig

String

Your function’s tracing settings (Active or PassThrough).

No

createFunction

CamelAwsLambdaEnvironmentVariables

Map<String, String>

The key-value pairs that represent your environment’s configuration settings.

No

createFunction

CamelAwsLambdaEnvironmentTags

Map<String, String>

The list of tags (key-value pairs) assigned to the new function.

No

createFunction

CamelAwsLambdaSecurityGroupIds

List<String>

If your Lambda function accesses resources in a VPC, a list of one or more security groups IDs in your VPC.

No

createFunction

CamelAwsLambdaSubnetIds

List<String>

If your Lambda function accesses resources in a VPC, a list of one or more subnet IDs in your VPC.

No

createAlias

CamelAwsLambdaFunctionVersion

String

The function version to set in the alias

Yes

createAlias

CamelAwsLambdaAliasFunctionName

String

The function name to set in the alias

Yes

createAlias

CamelAwsLambdaAliasFunctionDescription

String

The function description to set in the alias

No

deleteAlias

CamelAwsLambdaAliasFunctionName

String

The function name of the alias

Yes

getAlias

CamelAwsLambdaAliasFunctionName

String

The function name of the alias

Yes

listAliases

CamelAwsLambdaFunctionVersion

String

The function version to set in the alias

Yes

List of Avalaible Operations

listFunctions
getFunction
createFunction
deleteFunction
invokeFunction
updateFunction
createEventSourceMapping
deleteEventSourceMapping
listEventSourceMapping
listTags
tagResource
untagResource
publishVersion
listVersions
createAlias
deleteAlias
getAlias
listAliases

Example

To have a full understanding of how the component works, you may have a look at this integration test

Automatic detection of AmazonLambda client in registry

The component is capable of detecting the presence of an AmazonLambda bean into the registry. If it’s the only instance of that type it will be used as client and you won’t have to define it as uri parameter. This may be really useful for smarter configuration of the endpoint.

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws-lambda</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Spring Boot Auto-Configuration

When using aws-lambda with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws-lambda-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 13 options, which are listed below.

Name	Description	Default	Type
camel.component.aws-lambda.access-key	Amazon AWS Access Key		String
camel.component.aws-lambda.auto-discover-client	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	Boolean
camel.component.aws-lambda.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.aws-lambda.aws-lambda-client	To use a existing configured AwsLambdaClient as client. The option is a com.amazonaws.services.lambda.AWSLambda type.		AWSLambda
camel.component.aws-lambda.configuration	The AWS Lambda default configuration. The option is a org.apache.camel.component.aws.lambda.LambdaConfiguration type.		LambdaConfiguration
camel.component.aws-lambda.enabled	Whether to enable auto configuration of the aws-lambda component. This is enabled by default.		Boolean
camel.component.aws-lambda.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.aws-lambda.operation	The operation to perform. It can be listFunctions, getFunction, createFunction, deleteFunction or invokeFunction		LambdaOperations
camel.component.aws-lambda.proxy-host	To define a proxy host when instantiating the Lambda client		String
camel.component.aws-lambda.proxy-port	To define a proxy port when instantiating the Lambda client		Integer
camel.component.aws-lambda.proxy-protocol	To define a proxy protocol when instantiating the Lambda client		Protocol
camel.component.aws-lambda.region	Amazon AWS Region. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()		String
camel.component.aws-lambda.secret-key	Amazon AWS Secret Key		String

Name

Description

Default

Type

camel.component.aws-lambda.access-key

Amazon AWS Access Key

String

camel.component.aws-lambda.auto-discover-client

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

Boolean

camel.component.aws-lambda.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws-lambda.aws-lambda-client

To use a existing configured AwsLambdaClient as client. The option is a com.amazonaws.services.lambda.AWSLambda type.

AWSLambda

camel.component.aws-lambda.configuration

The AWS Lambda default configuration. The option is a org.apache.camel.component.aws.lambda.LambdaConfiguration type.

LambdaConfiguration

camel.component.aws-lambda.enabled

Whether to enable auto configuration of the aws-lambda component. This is enabled by default.

Boolean

camel.component.aws-lambda.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws-lambda.operation

The operation to perform. It can be listFunctions, getFunction, createFunction, deleteFunction or invokeFunction

LambdaOperations

camel.component.aws-lambda.proxy-host

To define a proxy host when instantiating the Lambda client

String

camel.component.aws-lambda.proxy-port

To define a proxy port when instantiating the Lambda client

Integer

camel.component.aws-lambda.proxy-protocol

To define a proxy protocol when instantiating the Lambda client

Protocol

camel.component.aws-lambda.region

Amazon AWS Region. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()

String

camel.component.aws-lambda.secret-key

Amazon AWS Secret Key

String