AWS Simple Email Service (SES)

URI Format

aws-ses://from[?options]

You can append query options to the URI in the following format, ?options=value&option2=value&…

URI Options

The AWS Simple Email Service (SES) component supports 15 options, which are listed below.

Name	Description	Default	Type
amazonSESClient (producer)	To use the AmazonSimpleEmailService as the client		AmazonSimpleEmailService
autoDiscoverClient (common)	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	boolean
configuration (producer)	The component configuration		SesConfiguration
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
proxyHost (producer)	To define a proxy host when instantiating the SES client		String
proxyPort (producer)	To define a proxy port when instantiating the SES client		Integer
proxyProtocol (producer)	To define a proxy protocol when instantiating the SES client. There are 2 enums and the value can be one of: HTTP, HTTPS	HTTPS	Protocol
region (producer)	The region in which SES client needs to work. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()		String
replyToAddresses (producer)	List of reply-to email address(es) for the message, override it using 'CamelAwsSesReplyToAddresses' header.		List
returnPath (producer)	The email address to which bounce notifications are to be forwarded, override it using 'CamelAwsSesReturnPath' header.		String
subject (producer)	The subject which is used if the message header 'CamelAwsSesSubject' is not present.		String
to (producer)	List of destination email address. Can be overriden with 'CamelAwsSesTo' header.		List
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
accessKey (security)	Amazon AWS Access Key		String
secretKey (security)	Amazon AWS Secret Key		String

Name

Description

Default

Type

amazonSESClient (producer)

To use the AmazonSimpleEmailService as the client

AmazonSimpleEmailService

autoDiscoverClient (common)

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

boolean

configuration (producer)

The component configuration

SesConfiguration

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

proxyHost (producer)

To define a proxy host when instantiating the SES client

String

proxyPort (producer)

To define a proxy port when instantiating the SES client

Integer

proxyProtocol (producer)

To define a proxy protocol when instantiating the SES client. There are 2 enums and the value can be one of: HTTP, HTTPS

HTTPS

Protocol

region (producer)

The region in which SES client needs to work. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()

String

replyToAddresses (producer)

List of reply-to email address(es) for the message, override it using 'CamelAwsSesReplyToAddresses' header.

List

returnPath (producer)

The email address to which bounce notifications are to be forwarded, override it using 'CamelAwsSesReturnPath' header.

String

subject (producer)

The subject which is used if the message header 'CamelAwsSesSubject' is not present.

String

to (producer)

List of destination email address. Can be overriden with 'CamelAwsSesTo' header.

List

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

accessKey (security)

Amazon AWS Access Key

String

secretKey (security)

Amazon AWS Secret Key

String

The AWS Simple Email Service (SES) endpoint is configured using URI syntax:

aws-ses:from

with the following path and query parameters:

Path Parameters (1 parameters):

Name	Description	Default	Type
from	Required The sender’s email address.		String

Name

Description

Default

Type

from

Required The sender’s email address.

String

Query Parameters (14 parameters):

Name	Description	Default	Type
amazonSESClient (producer)	To use the AmazonSimpleEmailService as the client		AmazonSimpleEmailService
autoDiscoverClient (common)	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
proxyHost (producer)	To define a proxy host when instantiating the SES client		String
proxyPort (producer)	To define a proxy port when instantiating the SES client		Integer
proxyProtocol (producer)	To define a proxy protocol when instantiating the SES client. There are 2 enums and the value can be one of: HTTP, HTTPS	HTTPS	Protocol
region (producer)	The region in which SES client needs to work. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()		String
replyToAddresses (producer)	List of reply-to email address(es) for the message, override it using 'CamelAwsSesReplyToAddresses' header.		List
returnPath (producer)	The email address to which bounce notifications are to be forwarded, override it using 'CamelAwsSesReturnPath' header.		String
subject (producer)	The subject which is used if the message header 'CamelAwsSesSubject' is not present.		String
to (producer)	List of destination email address. Can be overriden with 'CamelAwsSesTo' header.		List
synchronous (advanced)	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	boolean
accessKey (security)	Amazon AWS Access Key		String
secretKey (security)	Amazon AWS Secret Key		String

Name

Description

Default

Type

amazonSESClient (producer)

To use the AmazonSimpleEmailService as the client

AmazonSimpleEmailService

autoDiscoverClient (common)

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

proxyHost (producer)

To define a proxy host when instantiating the SES client

String

proxyPort (producer)

To define a proxy port when instantiating the SES client

Integer

proxyProtocol (producer)

To define a proxy protocol when instantiating the SES client. There are 2 enums and the value can be one of: HTTP, HTTPS

HTTPS

Protocol

region (producer)

The region in which SES client needs to work. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()

String

replyToAddresses (producer)

List of reply-to email address(es) for the message, override it using 'CamelAwsSesReplyToAddresses' header.

List

returnPath (producer)

The email address to which bounce notifications are to be forwarded, override it using 'CamelAwsSesReturnPath' header.

String

subject (producer)

The subject which is used if the message header 'CamelAwsSesSubject' is not present.

String

to (producer)

List of destination email address. Can be overriden with 'CamelAwsSesTo' header.

List

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

accessKey (security)

Amazon AWS Access Key

String

secretKey (security)

Amazon AWS Secret Key

String

Required SES component options

You have to provide the amazonSESClient in the Registry or your accessKey and secretKey to access the Amazon’s SES.

Usage

Message headers evaluated by the SES producer

Header Type Description

Header	Type	Description
`CamelAwsSesFrom`	`String`	The sender’s email address.
`CamelAwsSesTo`	`List<String>`	The destination(s) for this email.
`CamelAwsSesSubject`	`String`	The subject of the message.
`CamelAwsSesReplyToAddresses`	`List<String>`	The reply-to email address(es) for the message.
`CamelAwsSesReturnPath`	`String`	The email address to which bounce notifications are to be forwarded.
`CamelAwsSesHtmlEmail`	`Boolean`	The flag to show if email content is HTML.

CamelAwsSesFrom

String

The sender’s email address.

CamelAwsSesTo

List<String>

The destination(s) for this email.

CamelAwsSesSubject

String

The subject of the message.

CamelAwsSesReplyToAddresses

List<String>

The reply-to email address(es) for the message.

CamelAwsSesReturnPath

String

The email address to which bounce notifications are to be forwarded.

CamelAwsSesHtmlEmail

Boolean

The flag to show if email content is HTML.

Message headers set by the SES producer

Header Type Description

Header	Type	Description
`CamelAwsSesMessageId`	`String`	The Amazon SES message ID.

CamelAwsSesMessageId

String

The Amazon SES message ID.

Advanced AmazonSimpleEmailService configuration

If you need more control over the AmazonSimpleEmailService instance configuration you can create your own instance and refer to it from the URI:

from("direct:start")
.to("aws-ses://example@example.com?amazonSESClient=#client");

The #client refers to a AmazonSimpleEmailService in the Registry.

For example if your Camel Application is running behind a firewall:

AWSCredentials awsCredentials = new BasicAWSCredentials("myAccessKey", "mySecretKey");
ClientConfiguration clientConfiguration = new ClientConfiguration();
clientConfiguration.setProxyHost("http://myProxyHost");
clientConfiguration.setProxyPort(8080);
AmazonSimpleEmailService client = new AmazonSimpleEmailServiceClient(awsCredentials, clientConfiguration);

registry.bind("client", client);

Automatic detection of AmazonSimpleEmailService client in registry

The component is capable of detecting the presence of an AmazonSimpleEmailService bean into the registry. If it’s the only instance of that type it will be used as client and you won’t have to define it as uri parameter. This may be really useful for smarter configuration of the endpoint.

Producer Examples

from("direct:start")
    .setHeader(SesConstants.SUBJECT, constant("This is my subject"))
    .setHeader(SesConstants.TO, constant(Collections.singletonList("to@example.com"))
    .setBody(constant("This is my message text."))
    .to("aws-ses://from@example.com?accessKey=xxx&secretKey=yyy");

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws-ses</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Spring Boot Auto-Configuration

When using aws-ses with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws-ses-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 16 options, which are listed below.

Name	Description	Default	Type
camel.component.aws-ses.access-key	Amazon AWS Access Key		String
camel.component.aws-ses.amazon-s-e-s-client	To use the AmazonSimpleEmailService as the client. The option is a com.amazonaws.services.simpleemail.AmazonSimpleEmailService type.		AmazonSimpleEmailService
camel.component.aws-ses.auto-discover-client	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	Boolean
camel.component.aws-ses.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.aws-ses.configuration	The component configuration. The option is a org.apache.camel.component.aws.ses.SesConfiguration type.		SesConfiguration
camel.component.aws-ses.enabled	Whether to enable auto configuration of the aws-ses component. This is enabled by default.		Boolean
camel.component.aws-ses.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.aws-ses.proxy-host	To define a proxy host when instantiating the SES client		String
camel.component.aws-ses.proxy-port	To define a proxy port when instantiating the SES client		Integer
camel.component.aws-ses.proxy-protocol	To define a proxy protocol when instantiating the SES client		Protocol
camel.component.aws-ses.region	The region in which SES client needs to work. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()		String
camel.component.aws-ses.reply-to-addresses	List of reply-to email address(es) for the message, override it using 'CamelAwsSesReplyToAddresses' header.		List
camel.component.aws-ses.return-path	The email address to which bounce notifications are to be forwarded, override it using 'CamelAwsSesReturnPath' header.		String
camel.component.aws-ses.secret-key	Amazon AWS Secret Key		String
camel.component.aws-ses.subject	The subject which is used if the message header 'CamelAwsSesSubject' is not present.		String
camel.component.aws-ses.to	List of destination email address. Can be overriden with 'CamelAwsSesTo' header.		List

Name

Description

Default

Type

camel.component.aws-ses.access-key

Amazon AWS Access Key

String

camel.component.aws-ses.amazon-s-e-s-client

To use the AmazonSimpleEmailService as the client. The option is a com.amazonaws.services.simpleemail.AmazonSimpleEmailService type.

AmazonSimpleEmailService

camel.component.aws-ses.auto-discover-client

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

Boolean

camel.component.aws-ses.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws-ses.configuration

The component configuration. The option is a org.apache.camel.component.aws.ses.SesConfiguration type.

SesConfiguration

camel.component.aws-ses.enabled

Whether to enable auto configuration of the aws-ses component. This is enabled by default.

Boolean

camel.component.aws-ses.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws-ses.proxy-host

To define a proxy host when instantiating the SES client

String

camel.component.aws-ses.proxy-port

To define a proxy port when instantiating the SES client

Integer

camel.component.aws-ses.proxy-protocol

To define a proxy protocol when instantiating the SES client

Protocol

camel.component.aws-ses.region

The region in which SES client needs to work. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()

String

camel.component.aws-ses.reply-to-addresses

List of reply-to email address(es) for the message, override it using 'CamelAwsSesReplyToAddresses' header.

List

camel.component.aws-ses.return-path

The email address to which bounce notifications are to be forwarded, override it using 'CamelAwsSesReturnPath' header.

String

camel.component.aws-ses.secret-key

Amazon AWS Secret Key

String

camel.component.aws-ses.subject

The subject which is used if the message header 'CamelAwsSesSubject' is not present.

String

camel.component.aws-ses.to

List of destination email address. Can be overriden with 'CamelAwsSesTo' header.

List