AWS Simple Queue Service (SQS)

URI Format

aws-sqs://queueNameOrArn[?options]

The queue will be created if they don’t already exists.
You can append query options to the URI in the following format, ?options=value&option2=value&…

URI Options

The AWS Simple Queue Service (SQS) component supports 39 options, which are listed below.

Name	Description	Default	Type
amazonAWSHost (common)	The hostname of the Amazon AWS cloud.	amazonaws.com	String
amazonSQSClient (common)	To use the AmazonSQS as client		AmazonSQS
autoCreateQueue (common)	Setting the autocreation of the queue	true	boolean
autoDiscoverClient (common)	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	boolean
configuration (common)	The component configuration		SqsConfiguration
protocol (common)	The underlying protocol used to communicate with SQS	https	String
proxyProtocol (common)	To define a proxy protocol when instantiating the SQS client. There are 2 enums and the value can be one of: HTTP, HTTPS	HTTPS	Protocol
queueOwnerAWSAccountId (common)	Specify the queue owner aws account id when you need to connect the queue with different account owner.		String
region (common)	Specify the queue region which could be used with queueOwnerAWSAccountId to build the service URL. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()		String
attributeNames (consumer)	A list of attribute names to receive when consuming. Multiple names can be separated by comma.		String
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
concurrentConsumers (consumer)	Allows you to use multiple threads to poll the sqs queue to increase throughput	1	int
defaultVisibilityTimeout (consumer)	The default visibility timeout (in seconds)		Integer
deleteAfterRead (consumer)	Delete message from SQS after it has been read	true	boolean
deleteIfFiltered (consumer)	Whether or not to send the DeleteMessage to the SQS queue if an exchange fails to get through a filter. If 'false' and exchange does not make it through a Camel filter upstream in the route, then don’t send DeleteMessage.	true	boolean
extendMessageVisibility (consumer)	If enabled then a scheduled background task will keep extending the message visibility on SQS. This is needed if it takes a long time to process the message. If set to true defaultVisibilityTimeout must be set. See details at Amazon docs.	false	boolean
kmsDataKeyReusePeriodSeconds (consumer)	The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes).		Integer
kmsMasterKeyId (consumer)	The ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK.		String
messageAttributeNames (consumer)	A list of message attribute names to receive when consuming. Multiple names can be separated by comma.		String
serverSideEncryptionEnabled (consumer)	Define if Server Side Encryption is enabled or not on the queue	false	boolean
visibilityTimeout (consumer)	The duration (in seconds) that the received messages are hidden from subsequent retrieve requests after being retrieved by a ReceiveMessage request to set in the com.amazonaws.services.sqs.model.SetQueueAttributesRequest. This only make sense if its different from defaultVisibilityTimeout. It changes the queue visibility timeout attribute permanently.		Integer
waitTimeSeconds (consumer)	Duration in seconds (0 to 20) that the ReceiveMessage action call will wait until a message is in the queue to include in the response.		Integer
delaySeconds (producer)	Delay sending messages for a number of seconds.		Integer
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
messageDeduplicationIdStrategy (producer)	Only for FIFO queues. Strategy for setting the messageDeduplicationId on the message. Can be one of the following options: useExchangeId, useContentBasedDeduplication. For the useContentBasedDeduplication option, no messageDeduplicationId will be set on the message. There are 2 enums and the value can be one of: useExchangeId, useContentBasedDeduplication	useExchangeId	String
messageGroupIdStrategy (producer)	Only for FIFO queues. Strategy for setting the messageGroupId on the message. Can be one of the following options: useConstant, useExchangeId, usePropertyValue. For the usePropertyValue option, the value of property CamelAwsMessageGroupId will be used. There are 3 enums and the value can be one of: useConstant, useExchangeId, usePropertyValue		String
operation (producer)	The operation to do in case the user don’t want to send only a message. There are 3 enums and the value can be one of: sendBatchMessage, deleteMessage, listQueues		SqsOperations
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
delayQueue (advanced)	Define if you want to apply delaySeconds option to the queue or on single messages	false	boolean
queueUrl (advanced)	To define the queueUrl explicitly. All other parameters, which would influence the queueUrl, are ignored. This parameter is intended to be used, to connect to a mock implementation of SQS, for testing purposes.		String
proxyHost (proxy)	To define a proxy host when instantiating the SQS client		String
proxyPort (proxy)	To define a proxy port when instantiating the SQS client		Integer
maximumMessageSize (queue)	The maximumMessageSize (in bytes) an SQS message can contain for this queue.		Integer
messageRetentionPeriod (queue)	The messageRetentionPeriod (in seconds) a message will be retained by SQS for this queue.		Integer
policy (queue)	The policy for this queue		String
receiveMessageWaitTimeSeconds (queue)	If you do not specify WaitTimeSeconds in the request, the queue attribute ReceiveMessageWaitTimeSeconds is used to determine how long to wait.		Integer
redrivePolicy (queue)	Specify the policy that send message to DeadLetter queue. See detail at Amazon docs.		String
accessKey (security)	Amazon AWS Access Key		String
secretKey (security)	Amazon AWS Secret Key		String

Name

Description

Default

Type

amazonAWSHost (common)

The hostname of the Amazon AWS cloud.

amazonaws.com

String

amazonSQSClient (common)

To use the AmazonSQS as client

AmazonSQS

autoCreateQueue (common)

Setting the autocreation of the queue

true

boolean

autoDiscoverClient (common)

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

boolean

configuration (common)

The component configuration

SqsConfiguration

protocol (common)

The underlying protocol used to communicate with SQS

https

String

proxyProtocol (common)

To define a proxy protocol when instantiating the SQS client. There are 2 enums and the value can be one of: HTTP, HTTPS

HTTPS

Protocol

queueOwnerAWSAccountId (common)

Specify the queue owner aws account id when you need to connect the queue with different account owner.

String

region (common)

Specify the queue region which could be used with queueOwnerAWSAccountId to build the service URL. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()

String

attributeNames (consumer)

A list of attribute names to receive when consuming. Multiple names can be separated by comma.

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

concurrentConsumers (consumer)

Allows you to use multiple threads to poll the sqs queue to increase throughput

1

int

defaultVisibilityTimeout (consumer)

The default visibility timeout (in seconds)

Integer

deleteAfterRead (consumer)

Delete message from SQS after it has been read

true

boolean

deleteIfFiltered (consumer)

Whether or not to send the DeleteMessage to the SQS queue if an exchange fails to get through a filter. If 'false' and exchange does not make it through a Camel filter upstream in the route, then don’t send DeleteMessage.

true

boolean

extendMessageVisibility (consumer)

If enabled then a scheduled background task will keep extending the message visibility on SQS. This is needed if it takes a long time to process the message. If set to true defaultVisibilityTimeout must be set. See details at Amazon docs.

false

boolean

kmsDataKeyReusePeriodSeconds (consumer)

The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes).

Integer

kmsMasterKeyId (consumer)

The ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK.

String

messageAttributeNames (consumer)

A list of message attribute names to receive when consuming. Multiple names can be separated by comma.

String

serverSideEncryptionEnabled (consumer)

Define if Server Side Encryption is enabled or not on the queue

false

boolean

visibilityTimeout (consumer)

The duration (in seconds) that the received messages are hidden from subsequent retrieve requests after being retrieved by a ReceiveMessage request to set in the com.amazonaws.services.sqs.model.SetQueueAttributesRequest. This only make sense if its different from defaultVisibilityTimeout. It changes the queue visibility timeout attribute permanently.

Integer

waitTimeSeconds (consumer)

Duration in seconds (0 to 20) that the ReceiveMessage action call will wait until a message is in the queue to include in the response.

Integer

delaySeconds (producer)

Delay sending messages for a number of seconds.

Integer

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

messageDeduplicationIdStrategy (producer)

Only for FIFO queues. Strategy for setting the messageDeduplicationId on the message. Can be one of the following options: useExchangeId, useContentBasedDeduplication. For the useContentBasedDeduplication option, no messageDeduplicationId will be set on the message. There are 2 enums and the value can be one of: useExchangeId, useContentBasedDeduplication

useExchangeId

String

messageGroupIdStrategy (producer)

Only for FIFO queues. Strategy for setting the messageGroupId on the message. Can be one of the following options: useConstant, useExchangeId, usePropertyValue. For the usePropertyValue option, the value of property CamelAwsMessageGroupId will be used. There are 3 enums and the value can be one of: useConstant, useExchangeId, usePropertyValue

String

operation (producer)

The operation to do in case the user don’t want to send only a message. There are 3 enums and the value can be one of: sendBatchMessage, deleteMessage, listQueues

SqsOperations

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

delayQueue (advanced)

Define if you want to apply delaySeconds option to the queue or on single messages

false

boolean

queueUrl (advanced)

To define the queueUrl explicitly. All other parameters, which would influence the queueUrl, are ignored. This parameter is intended to be used, to connect to a mock implementation of SQS, for testing purposes.

String

proxyHost (proxy)

To define a proxy host when instantiating the SQS client

String

proxyPort (proxy)

To define a proxy port when instantiating the SQS client

Integer

maximumMessageSize (queue)

The maximumMessageSize (in bytes) an SQS message can contain for this queue.

Integer

messageRetentionPeriod (queue)

The messageRetentionPeriod (in seconds) a message will be retained by SQS for this queue.

Integer

policy (queue)

The policy for this queue

String

receiveMessageWaitTimeSeconds (queue)

If you do not specify WaitTimeSeconds in the request, the queue attribute ReceiveMessageWaitTimeSeconds is used to determine how long to wait.

Integer

redrivePolicy (queue)

Specify the policy that send message to DeadLetter queue. See detail at Amazon docs.

String

accessKey (security)

Amazon AWS Access Key

String

secretKey (security)

Amazon AWS Secret Key

String

The AWS Simple Queue Service (SQS) endpoint is configured using URI syntax:

aws-sqs:queueNameOrArn

with the following path and query parameters:

Path Parameters (1 parameters):

Name	Description	Default	Type
queueNameOrArn	Required Queue name or ARN		String

Name

Description

Default

Type

queueNameOrArn

Required Queue name or ARN

String

Query Parameters (58 parameters):

Name	Description	Default	Type
amazonAWSHost (common)	The hostname of the Amazon AWS cloud.	amazonaws.com	String
amazonSQSClient (common)	To use the AmazonSQS as client		AmazonSQS
autoCreateQueue (common)	Setting the autocreation of the queue	true	boolean
autoDiscoverClient (common)	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	boolean
headerFilterStrategy (common)	To use a custom HeaderFilterStrategy to map headers to/from Camel.		HeaderFilterStrategy
protocol (common)	The underlying protocol used to communicate with SQS	https	String
proxyProtocol (common)	To define a proxy protocol when instantiating the SQS client. There are 2 enums and the value can be one of: HTTP, HTTPS	HTTPS	Protocol
queueOwnerAWSAccountId (common)	Specify the queue owner aws account id when you need to connect the queue with different account owner.		String
region (common)	Specify the queue region which could be used with queueOwnerAWSAccountId to build the service URL. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()		String
attributeNames (consumer)	A list of attribute names to receive when consuming. Multiple names can be separated by comma.		String
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
concurrentConsumers (consumer)	Allows you to use multiple threads to poll the sqs queue to increase throughput	1	int
defaultVisibilityTimeout (consumer)	The default visibility timeout (in seconds)		Integer
deleteAfterRead (consumer)	Delete message from SQS after it has been read	true	boolean
deleteIfFiltered (consumer)	Whether or not to send the DeleteMessage to the SQS queue if an exchange fails to get through a filter. If 'false' and exchange does not make it through a Camel filter upstream in the route, then don’t send DeleteMessage.	true	boolean
extendMessageVisibility (consumer)	If enabled then a scheduled background task will keep extending the message visibility on SQS. This is needed if it takes a long time to process the message. If set to true defaultVisibilityTimeout must be set. See details at Amazon docs.	false	boolean
kmsDataKeyReusePeriodSeconds (consumer)	The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes).		Integer
kmsMasterKeyId (consumer)	The ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK.		String
maxMessagesPerPoll (consumer)	Gets the maximum number of messages as a limit to poll at each polling. Is default unlimited, but use 0 or negative number to disable it as unlimited.		int
messageAttributeNames (consumer)	A list of message attribute names to receive when consuming. Multiple names can be separated by comma.		String
sendEmptyMessageWhenIdle (consumer)	If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.	false	boolean
serverSideEncryptionEnabled (consumer)	Define if Server Side Encryption is enabled or not on the queue	false	boolean
visibilityTimeout (consumer)	The duration (in seconds) that the received messages are hidden from subsequent retrieve requests after being retrieved by a ReceiveMessage request to set in the com.amazonaws.services.sqs.model.SetQueueAttributesRequest. This only make sense if its different from defaultVisibilityTimeout. It changes the queue visibility timeout attribute permanently.		Integer
waitTimeSeconds (consumer)	Duration in seconds (0 to 20) that the ReceiveMessage action call will wait until a message is in the queue to include in the response.		Integer
exceptionHandler (consumer)	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer)	Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut		ExchangePattern
pollStrategy (consumer)	A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.		PollingConsumerPollStrategy
delaySeconds (producer)	Delay sending messages for a number of seconds.		Integer
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
messageDeduplicationIdStrategy (producer)	Only for FIFO queues. Strategy for setting the messageDeduplicationId on the message. Can be one of the following options: useExchangeId, useContentBasedDeduplication. For the useContentBasedDeduplication option, no messageDeduplicationId will be set on the message. There are 2 enums and the value can be one of: useExchangeId, useContentBasedDeduplication	useExchangeId	String
messageGroupIdStrategy (producer)	Only for FIFO queues. Strategy for setting the messageGroupId on the message. Can be one of the following options: useConstant, useExchangeId, usePropertyValue. For the usePropertyValue option, the value of property CamelAwsMessageGroupId will be used. There are 3 enums and the value can be one of: useConstant, useExchangeId, usePropertyValue		String
operation (producer)	The operation to do in case the user don’t want to send only a message. There are 3 enums and the value can be one of: sendBatchMessage, deleteMessage, listQueues		SqsOperations
delayQueue (advanced)	Define if you want to apply delaySeconds option to the queue or on single messages	false	boolean
queueUrl (advanced)	To define the queueUrl explicitly. All other parameters, which would influence the queueUrl, are ignored. This parameter is intended to be used, to connect to a mock implementation of SQS, for testing purposes.		String
synchronous (advanced)	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	boolean
proxyHost (proxy)	To define a proxy host when instantiating the SQS client		String
proxyPort (proxy)	To define a proxy port when instantiating the SQS client		Integer
maximumMessageSize (queue)	The maximumMessageSize (in bytes) an SQS message can contain for this queue.		Integer
messageRetentionPeriod (queue)	The messageRetentionPeriod (in seconds) a message will be retained by SQS for this queue.		Integer
policy (queue)	The policy for this queue		String
receiveMessageWaitTimeSeconds (queue)	If you do not specify WaitTimeSeconds in the request, the queue attribute ReceiveMessageWaitTimeSeconds is used to determine how long to wait.		Integer
redrivePolicy (queue)	Specify the policy that send message to DeadLetter queue. See detail at Amazon docs.		String
backoffErrorThreshold (scheduler)	The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.		int
backoffIdleThreshold (scheduler)	The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.		int
backoffMultiplier (scheduler)	To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.		int
delay (scheduler)	Milliseconds before the next poll.	500	long
greedy (scheduler)	If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.	false	boolean
initialDelay (scheduler)	Milliseconds before the first poll starts.	1000	long
repeatCount (scheduler)	Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.	0	long
runLoggingLevel (scheduler)	The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. There are 6 enums and the value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF	TRACE	LoggingLevel
scheduledExecutorService (scheduler)	Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.		ScheduledExecutorService
scheduler (scheduler)	To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler	none	Object
schedulerProperties (scheduler)	To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.		Map
startScheduler (scheduler)	Whether the scheduler should be auto started.	true	boolean
timeUnit (scheduler)	Time unit for initialDelay and delay options. There are 7 enums and the value can be one of: NANOSECONDS, MICROSECONDS, MILLISECONDS, SECONDS, MINUTES, HOURS, DAYS	MILLISECONDS	TimeUnit
useFixedDelay (scheduler)	Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.	true	boolean
accessKey (security)	Amazon AWS Access Key		String
secretKey (security)	Amazon AWS Secret Key		String

Name

Description

Default

Type

amazonAWSHost (common)

The hostname of the Amazon AWS cloud.

amazonaws.com

String

amazonSQSClient (common)

To use the AmazonSQS as client

AmazonSQS

autoCreateQueue (common)

Setting the autocreation of the queue

true

boolean

autoDiscoverClient (common)

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

boolean

headerFilterStrategy (common)

To use a custom HeaderFilterStrategy to map headers to/from Camel.

HeaderFilterStrategy

protocol (common)

The underlying protocol used to communicate with SQS

https

String

proxyProtocol (common)

To define a proxy protocol when instantiating the SQS client. There are 2 enums and the value can be one of: HTTP, HTTPS

HTTPS

Protocol

queueOwnerAWSAccountId (common)

Specify the queue owner aws account id when you need to connect the queue with different account owner.

String

region (common)

Specify the queue region which could be used with queueOwnerAWSAccountId to build the service URL. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()

String

attributeNames (consumer)

A list of attribute names to receive when consuming. Multiple names can be separated by comma.

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

concurrentConsumers (consumer)

Allows you to use multiple threads to poll the sqs queue to increase throughput

1

int

defaultVisibilityTimeout (consumer)

The default visibility timeout (in seconds)

Integer

deleteAfterRead (consumer)

Delete message from SQS after it has been read

true

boolean

deleteIfFiltered (consumer)

Whether or not to send the DeleteMessage to the SQS queue if an exchange fails to get through a filter. If 'false' and exchange does not make it through a Camel filter upstream in the route, then don’t send DeleteMessage.

true

boolean

extendMessageVisibility (consumer)

If enabled then a scheduled background task will keep extending the message visibility on SQS. This is needed if it takes a long time to process the message. If set to true defaultVisibilityTimeout must be set. See details at Amazon docs.

false

boolean

kmsDataKeyReusePeriodSeconds (consumer)

The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes).

Integer

kmsMasterKeyId (consumer)

The ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK.

String

maxMessagesPerPoll (consumer)

Gets the maximum number of messages as a limit to poll at each polling. Is default unlimited, but use 0 or negative number to disable it as unlimited.

int

messageAttributeNames (consumer)

A list of message attribute names to receive when consuming. Multiple names can be separated by comma.

String

sendEmptyMessageWhenIdle (consumer)

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

boolean

serverSideEncryptionEnabled (consumer)

Define if Server Side Encryption is enabled or not on the queue

false

boolean

visibilityTimeout (consumer)

The duration (in seconds) that the received messages are hidden from subsequent retrieve requests after being retrieved by a ReceiveMessage request to set in the com.amazonaws.services.sqs.model.SetQueueAttributesRequest. This only make sense if its different from defaultVisibilityTimeout. It changes the queue visibility timeout attribute permanently.

Integer

waitTimeSeconds (consumer)

Duration in seconds (0 to 20) that the ReceiveMessage action call will wait until a message is in the queue to include in the response.

Integer

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

pollStrategy (consumer)

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

PollingConsumerPollStrategy

delaySeconds (producer)

Delay sending messages for a number of seconds.

Integer

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

messageDeduplicationIdStrategy (producer)

Only for FIFO queues. Strategy for setting the messageDeduplicationId on the message. Can be one of the following options: useExchangeId, useContentBasedDeduplication. For the useContentBasedDeduplication option, no messageDeduplicationId will be set on the message. There are 2 enums and the value can be one of: useExchangeId, useContentBasedDeduplication

useExchangeId

String

messageGroupIdStrategy (producer)

Only for FIFO queues. Strategy for setting the messageGroupId on the message. Can be one of the following options: useConstant, useExchangeId, usePropertyValue. For the usePropertyValue option, the value of property CamelAwsMessageGroupId will be used. There are 3 enums and the value can be one of: useConstant, useExchangeId, usePropertyValue

String

operation (producer)

The operation to do in case the user don’t want to send only a message. There are 3 enums and the value can be one of: sendBatchMessage, deleteMessage, listQueues

SqsOperations

delayQueue (advanced)

Define if you want to apply delaySeconds option to the queue or on single messages

false

boolean

queueUrl (advanced)

To define the queueUrl explicitly. All other parameters, which would influence the queueUrl, are ignored. This parameter is intended to be used, to connect to a mock implementation of SQS, for testing purposes.

String

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

proxyHost (proxy)

To define a proxy host when instantiating the SQS client

String

proxyPort (proxy)

To define a proxy port when instantiating the SQS client

Integer

maximumMessageSize (queue)

The maximumMessageSize (in bytes) an SQS message can contain for this queue.

Integer

messageRetentionPeriod (queue)

The messageRetentionPeriod (in seconds) a message will be retained by SQS for this queue.

Integer

policy (queue)

The policy for this queue

String

receiveMessageWaitTimeSeconds (queue)

If you do not specify WaitTimeSeconds in the request, the queue attribute ReceiveMessageWaitTimeSeconds is used to determine how long to wait.

Integer

redrivePolicy (queue)

Specify the policy that send message to DeadLetter queue. See detail at Amazon docs.

String

backoffErrorThreshold (scheduler)

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

int

backoffIdleThreshold (scheduler)

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

int

backoffMultiplier (scheduler)

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

int

delay (scheduler)

Milliseconds before the next poll.

500

long

greedy (scheduler)

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

boolean

initialDelay (scheduler)

Milliseconds before the first poll starts.

1000

long

repeatCount (scheduler)

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

0

long

runLoggingLevel (scheduler)

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. There are 6 enums and the value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF

TRACE

LoggingLevel

scheduledExecutorService (scheduler)

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

ScheduledExecutorService

scheduler (scheduler)

To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler

none

Object

schedulerProperties (scheduler)

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

Map

startScheduler (scheduler)

Whether the scheduler should be auto started.

true

boolean

timeUnit (scheduler)

Time unit for initialDelay and delay options. There are 7 enums and the value can be one of: NANOSECONDS, MICROSECONDS, MILLISECONDS, SECONDS, MINUTES, HOURS, DAYS

MILLISECONDS

TimeUnit

useFixedDelay (scheduler)

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

boolean

accessKey (security)

Amazon AWS Access Key

String

secretKey (security)

Amazon AWS Secret Key

String

Required SQS component options

You have to provide the amazonSQSClient in the Registry or your accessKey and secretKey to access the Amazon’s SQS.

Batch Consumer

This component implements the Batch Consumer.

This allows you for instance to know how many messages exists in this batch and for instance let the Aggregator aggregate this number of messages.

Usage

Message headers set by the SQS producer

Header Type Description

Header	Type	Description
`CamelAwsSqsMD5OfBody`	`String`	The MD5 checksum of the Amazon SQS message.
`CamelAwsSqsMessageId`	`String`	The Amazon SQS message ID.
`CamelAwsSqsDelaySeconds`	`Integer`	The delay seconds that the Amazon SQS message can be see by others.

CamelAwsSqsMD5OfBody

String

The MD5 checksum of the Amazon SQS message.

CamelAwsSqsMessageId

String

The Amazon SQS message ID.

CamelAwsSqsDelaySeconds

Integer

The delay seconds that the Amazon SQS message can be see by others.

Message headers set by the SQS consumer

Header Type Description

Header	Type	Description
`CamelAwsSqsMD5OfBody`	`String`	The MD5 checksum of the Amazon SQS message.
`CamelAwsSqsMessageId`	`String`	The Amazon SQS message ID.
`CamelAwsSqsReceiptHandle`	`String`	The Amazon SQS message receipt handle.
`CamelAwsSqsMessageAttributes`	`Map<String, String>`	The Amazon SQS message attributes.

CamelAwsSqsMD5OfBody

String

The MD5 checksum of the Amazon SQS message.

CamelAwsSqsMessageId

String

The Amazon SQS message ID.

CamelAwsSqsReceiptHandle

String

The Amazon SQS message receipt handle.

CamelAwsSqsMessageAttributes

Map<String, String>

The Amazon SQS message attributes.

Advanced AmazonSQS configuration

If your Camel Application is running behind a firewall or if you need to have more control over the AmazonSQS instance configuration, you can create your own instance:

AWSCredentials awsCredentials = new BasicAWSCredentials("myAccessKey", "mySecretKey");

ClientConfiguration clientConfiguration = new ClientConfiguration();
clientConfiguration.setProxyHost("http://myProxyHost");
clientConfiguration.setProxyPort(8080);

AmazonSQS client = new AmazonSQSClient(awsCredentials, clientConfiguration);

registry.bind("client", client);

and refer to it in your Camel aws-sqs component configuration:

from("aws-sqs://MyQueue?amazonSQSClient=#client&delay=5000&maxMessagesPerPoll=5")
.to("mock:result");

Creating or updating an SQS Queue

In the SQS Component, when an endpoint is started, a check is executed to obtain information about the existence of the queue or not. You’re able to customize the creation through the QueueAttributeName mapping with the SQSConfiguration option.

from("aws-sqs://MyQueue?amazonSQSClient=#client&delay=5000&maxMessagesPerPoll=5")
.to("mock:result");

In this example if the MyQueue queue is not already created on AWS (and the autoCreateQueue option is set to true), it will be created with default parameters from the SQS configuration. If it’s already up on AWS, the SQS configuration options will be used to override the existent AWS configuration.

DelayQueue VS Delay for Single message

When the option delayQueue is set to true, the SQS Queue will be a DelayQueue with the DelaySeconds option as delay. For more information about DelayQueue you can read the AWS SQS documentation. One important information to take into account is the following:

For standard queues, the per-queue delay setting is not retroactive—changing the setting doesn’t affect the delay of messages already in the queue.
For FIFO queues, the per-queue delay setting is retroactive—changing the setting affects the delay of messages already in the queue.

as stated in the official documentation. If you want to specify a delay on single messages, you can ignore the delayQueue option, while you can set this option to true, if you need to add a fixed delay to all messages enqueued.

Server Side Encryption

There is a set of Server Side Encryption attributes for a queue. The related option are serverSideEncryptionEnabled, keyMasterKeyId and kmsDataKeyReusePeriod. The SSE is disabled by default. You need to explicitly set the option to true and set the related parameters as queue attributes.

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws-sqs</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

JMS-style Selectors

SQS does not allow selectors, but you can effectively achieve this by using the Camel Filter EIP and setting an appropriate visibilityTimeout. When SQS dispatches a message, it will wait up to the visibility timeout before it will try to dispatch the message to a different consumer unless a DeleteMessage is received. By default, Camel will always send the DeleteMessage at the end of the route, unless the route ended in failure. To achieve appropriate filtering and not send the DeleteMessage even on successful completion of the route, use a Filter:

from("aws-sqs://MyQueue?amazonSQSClient=#client&defaultVisibilityTimeout=5000&deleteIfFiltered=false&deleteAfterRead=false")
.filter("${header.login} == true")
.to("mock:result");

In the above code, if an exchange doesn’t have an appropriate header, it will not make it through the filter AND also not be deleted from the SQS queue. After 5000 milliseconds, the message will become visible to other consumers.

Available Producer Operations

single message (default)
sendBatchMessage
deleteMessage
listQueues

Send Batch Message

You can set a SendMessageBatchRequest or an Iterable

from("direct:start")
  .setHeader(SqsConstants.SQS_OPERATION, constant("sendBatchMessage")).to("aws-sqs://camel-1?accessKey=RAW(xxx)&secretKey=RAW(xxx)&region=EU_WEST_1");

As result you’ll get an exchange containing a SendMessageBatchResult instance, that you can examinate to check what messages were successfull and what not. The id set on each message of the batch will be a Random UUID.

Delete single Message

Use deleteMessage operation to delete a single message. You’ll need to set a receipt handle header for the message you want to delete.

from("direct:start")
  .setHeader(SqsConstants.SQS_OPERATION, constant("deleteMessage"))
  .setHeader(SqsConstants.RECEIPT_HANDLE, constant("123456"))
  .to("aws-sqs://camel-1?accessKey=RAW(xxx)&secretKey=RAW(xxx)&region=EU_WEST_1");

As result you’ll get an exchange containing a DeleteMessageResult instance, that you can use to check if the message was deleted or not.

List Queues

Use listQueues operation to list queues.

from("direct:start")
  .setHeader(SqsConstants.SQS_OPERATION, constant("listQueues")).to("aws-sqs://camel-1?accessKey=RAW(xxx)&secretKey=RAW(xxx)&region=EU_WEST_1");

As result you’ll get an exchange containing a ListQueuesResult instance, that you can examinate to check the actual queues.

Queue Autocreation

With the option autoCreateQueue users are able to avoid the autocreation of an SQS Queue in case it doesn’t exist. The default for this option is true. If set to false any operation on a not-existent queue in AWS won’t be successful and an error will be returned.

Automatic detection of AmazonSQS client in registry

The component is capable of detecting the presence of an AmazonSQS bean into the registry. If it’s the only instance of that type it will be used as client and you won’t have to define it as uri parameter. This may be really useful for smarter configuration of the endpoint.

Send Batch Message and Message Deduplication Strategy

In case you’re using a SendBatchMessage Operation, you can set two different kind of Message Deduplication Strategy: - useExchangeId - useContentBasedDeduplication

The first one will use a ExchangeIdMessageDeduplicationIdStrategy, that will use the Exchange ID as parameter The other one will use a NullMessageDeduplicationIdStrategy, that will use the body as deduplication element.

In case of send batch message operation, you’ll need to use the useContentBasedDeduplication and on the Queue you’re pointing you’ll need to enable the content based deduplication option.

Spring Boot Auto-Configuration

When using aws-sqs with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws-sqs-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 40 options, which are listed below.

Name	Description	Default	Type
camel.component.aws-sqs.access-key	Amazon AWS Access Key		String
camel.component.aws-sqs.amazon-a-w-s-host	The hostname of the Amazon AWS cloud.	amazonaws.com	String
camel.component.aws-sqs.amazon-s-q-s-client	To use the AmazonSQS as client. The option is a com.amazonaws.services.sqs.AmazonSQS type.		AmazonSQS
camel.component.aws-sqs.attribute-names	A list of attribute names to receive when consuming. Multiple names can be separated by comma.		String
camel.component.aws-sqs.auto-create-queue	Setting the autocreation of the queue	true	Boolean
camel.component.aws-sqs.auto-discover-client	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	Boolean
camel.component.aws-sqs.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.aws-sqs.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.aws-sqs.concurrent-consumers	Allows you to use multiple threads to poll the sqs queue to increase throughput	1	Integer
camel.component.aws-sqs.configuration	The component configuration. The option is a org.apache.camel.component.aws.sqs.SqsConfiguration type.		SqsConfiguration
camel.component.aws-sqs.default-visibility-timeout	The default visibility timeout (in seconds)		Integer
camel.component.aws-sqs.delay-queue	Define if you want to apply delaySeconds option to the queue or on single messages	false	Boolean
camel.component.aws-sqs.delay-seconds	Delay sending messages for a number of seconds.		Integer
camel.component.aws-sqs.delete-after-read	Delete message from SQS after it has been read	true	Boolean
camel.component.aws-sqs.delete-if-filtered	Whether or not to send the DeleteMessage to the SQS queue if an exchange fails to get through a filter. If 'false' and exchange does not make it through a Camel filter upstream in the route, then don’t send DeleteMessage.	true	Boolean
camel.component.aws-sqs.enabled	Whether to enable auto configuration of the aws-sqs component. This is enabled by default.		Boolean
camel.component.aws-sqs.extend-message-visibility	If enabled then a scheduled background task will keep extending the message visibility on SQS. This is needed if it takes a long time to process the message. If set to true defaultVisibilityTimeout must be set. See details at Amazon docs.	false	Boolean
camel.component.aws-sqs.kms-data-key-reuse-period-seconds	The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes).		Integer
camel.component.aws-sqs.kms-master-key-id	The ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK.		String
camel.component.aws-sqs.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.aws-sqs.maximum-message-size	The maximumMessageSize (in bytes) an SQS message can contain for this queue.		Integer
camel.component.aws-sqs.message-attribute-names	A list of message attribute names to receive when consuming. Multiple names can be separated by comma.		String
camel.component.aws-sqs.message-deduplication-id-strategy	Only for FIFO queues. Strategy for setting the messageDeduplicationId on the message. Can be one of the following options: useExchangeId, useContentBasedDeduplication. For the useContentBasedDeduplication option, no messageDeduplicationId will be set on the message.	useExchangeId	String
camel.component.aws-sqs.message-group-id-strategy	Only for FIFO queues. Strategy for setting the messageGroupId on the message. Can be one of the following options: useConstant, useExchangeId, usePropertyValue. For the usePropertyValue option, the value of property CamelAwsMessageGroupId will be used.		String
camel.component.aws-sqs.message-retention-period	The messageRetentionPeriod (in seconds) a message will be retained by SQS for this queue.		Integer
camel.component.aws-sqs.operation	The operation to do in case the user don’t want to send only a message		SqsOperations
camel.component.aws-sqs.policy	The policy for this queue		String
camel.component.aws-sqs.protocol	The underlying protocol used to communicate with SQS	https	String
camel.component.aws-sqs.proxy-host	To define a proxy host when instantiating the SQS client		String
camel.component.aws-sqs.proxy-port	To define a proxy port when instantiating the SQS client		Integer
camel.component.aws-sqs.proxy-protocol	To define a proxy protocol when instantiating the SQS client		Protocol
camel.component.aws-sqs.queue-owner-a-w-s-account-id	Specify the queue owner aws account id when you need to connect the queue with different account owner.		String
camel.component.aws-sqs.queue-url	To define the queueUrl explicitly. All other parameters, which would influence the queueUrl, are ignored. This parameter is intended to be used, to connect to a mock implementation of SQS, for testing purposes.		String
camel.component.aws-sqs.receive-message-wait-time-seconds	If you do not specify WaitTimeSeconds in the request, the queue attribute ReceiveMessageWaitTimeSeconds is used to determine how long to wait.		Integer
camel.component.aws-sqs.redrive-policy	Specify the policy that send message to DeadLetter queue. See detail at Amazon docs.		String
camel.component.aws-sqs.region	Specify the queue region which could be used with queueOwnerAWSAccountId to build the service URL. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()		String
camel.component.aws-sqs.secret-key	Amazon AWS Secret Key		String
camel.component.aws-sqs.server-side-encryption-enabled	Define if Server Side Encryption is enabled or not on the queue	false	Boolean
camel.component.aws-sqs.visibility-timeout	The duration (in seconds) that the received messages are hidden from subsequent retrieve requests after being retrieved by a ReceiveMessage request to set in the com.amazonaws.services.sqs.model.SetQueueAttributesRequest. This only make sense if its different from defaultVisibilityTimeout. It changes the queue visibility timeout attribute permanently.		Integer
camel.component.aws-sqs.wait-time-seconds	Duration in seconds (0 to 20) that the ReceiveMessage action call will wait until a message is in the queue to include in the response.		Integer

Name

Description

Default

Type

camel.component.aws-sqs.access-key

Amazon AWS Access Key

String

camel.component.aws-sqs.amazon-a-w-s-host

The hostname of the Amazon AWS cloud.

amazonaws.com

String

camel.component.aws-sqs.amazon-s-q-s-client

To use the AmazonSQS as client. The option is a com.amazonaws.services.sqs.AmazonSQS type.

AmazonSQS

camel.component.aws-sqs.attribute-names

A list of attribute names to receive when consuming. Multiple names can be separated by comma.

String

camel.component.aws-sqs.auto-create-queue

Setting the autocreation of the queue

true

Boolean

camel.component.aws-sqs.auto-discover-client

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

Boolean

camel.component.aws-sqs.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws-sqs.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.aws-sqs.concurrent-consumers

Allows you to use multiple threads to poll the sqs queue to increase throughput

1

Integer

camel.component.aws-sqs.configuration

The component configuration. The option is a org.apache.camel.component.aws.sqs.SqsConfiguration type.

SqsConfiguration

camel.component.aws-sqs.default-visibility-timeout

The default visibility timeout (in seconds)

Integer

camel.component.aws-sqs.delay-queue

Define if you want to apply delaySeconds option to the queue or on single messages

false

Boolean

camel.component.aws-sqs.delay-seconds

Delay sending messages for a number of seconds.

Integer

camel.component.aws-sqs.delete-after-read

Delete message from SQS after it has been read

true

Boolean

camel.component.aws-sqs.delete-if-filtered

Whether or not to send the DeleteMessage to the SQS queue if an exchange fails to get through a filter. If 'false' and exchange does not make it through a Camel filter upstream in the route, then don’t send DeleteMessage.

true

Boolean

camel.component.aws-sqs.enabled

Whether to enable auto configuration of the aws-sqs component. This is enabled by default.

Boolean

camel.component.aws-sqs.extend-message-visibility

If enabled then a scheduled background task will keep extending the message visibility on SQS. This is needed if it takes a long time to process the message. If set to true defaultVisibilityTimeout must be set. See details at Amazon docs.

false

Boolean

camel.component.aws-sqs.kms-data-key-reuse-period-seconds

The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes).

Integer

camel.component.aws-sqs.kms-master-key-id

The ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK.

String

camel.component.aws-sqs.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws-sqs.maximum-message-size

The maximumMessageSize (in bytes) an SQS message can contain for this queue.

Integer

camel.component.aws-sqs.message-attribute-names

A list of message attribute names to receive when consuming. Multiple names can be separated by comma.

String

camel.component.aws-sqs.message-deduplication-id-strategy

Only for FIFO queues. Strategy for setting the messageDeduplicationId on the message. Can be one of the following options: useExchangeId, useContentBasedDeduplication. For the useContentBasedDeduplication option, no messageDeduplicationId will be set on the message.

useExchangeId

String

camel.component.aws-sqs.message-group-id-strategy

Only for FIFO queues. Strategy for setting the messageGroupId on the message. Can be one of the following options: useConstant, useExchangeId, usePropertyValue. For the usePropertyValue option, the value of property CamelAwsMessageGroupId will be used.

String

camel.component.aws-sqs.message-retention-period

The messageRetentionPeriod (in seconds) a message will be retained by SQS for this queue.

Integer

camel.component.aws-sqs.operation

The operation to do in case the user don’t want to send only a message

SqsOperations

camel.component.aws-sqs.policy

The policy for this queue

String

camel.component.aws-sqs.protocol

The underlying protocol used to communicate with SQS

https

String

camel.component.aws-sqs.proxy-host

To define a proxy host when instantiating the SQS client

String

camel.component.aws-sqs.proxy-port

To define a proxy port when instantiating the SQS client

Integer

camel.component.aws-sqs.proxy-protocol

To define a proxy protocol when instantiating the SQS client

Protocol

camel.component.aws-sqs.queue-owner-a-w-s-account-id

Specify the queue owner aws account id when you need to connect the queue with different account owner.

String

camel.component.aws-sqs.queue-url

To define the queueUrl explicitly. All other parameters, which would influence the queueUrl, are ignored. This parameter is intended to be used, to connect to a mock implementation of SQS, for testing purposes.

String

camel.component.aws-sqs.receive-message-wait-time-seconds

If you do not specify WaitTimeSeconds in the request, the queue attribute ReceiveMessageWaitTimeSeconds is used to determine how long to wait.

Integer

camel.component.aws-sqs.redrive-policy

Specify the policy that send message to DeadLetter queue. See detail at Amazon docs.

String

camel.component.aws-sqs.region

Specify the queue region which could be used with queueOwnerAWSAccountId to build the service URL. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()

String

camel.component.aws-sqs.secret-key

Amazon AWS Secret Key

String

camel.component.aws-sqs.server-side-encryption-enabled

Define if Server Side Encryption is enabled or not on the queue

false

Boolean

camel.component.aws-sqs.visibility-timeout

The duration (in seconds) that the received messages are hidden from subsequent retrieve requests after being retrieved by a ReceiveMessage request to set in the com.amazonaws.services.sqs.model.SetQueueAttributesRequest. This only make sense if its different from defaultVisibilityTimeout. It changes the queue visibility timeout attribute permanently.

Integer

camel.component.aws-sqs.wait-time-seconds

Duration in seconds (0 to 20) that the ReceiveMessage action call will wait until a message is in the queue to include in the response.

Integer