Hazelcast Ringbuffer
Since Camel 2.16
Only producer is supported
The Hazelcast ringbuffer component is one of Camel Hazelcast Components which allows you to access Hazelcast ringbuffer. Ringbuffer is a distributed data structure where the data is stored in a ring-like structure. You can think of it as a circular array with a certain capacity.
Options
The Hazelcast Ringbuffer component supports 4 options, which are listed below.
Name | Description | Default | Type |
---|---|---|---|
lazyStartProducer (producer) |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
boolean |
autowiredEnabled (advanced) |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
boolean |
hazelcastInstance (advanced) |
The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. |
HazelcastInstance |
|
hazelcastMode (advanced) |
The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default. |
node |
String |
The Hazelcast Ringbuffer endpoint is configured using URI syntax:
hazelcast-ringbuffer:cacheName
with the following path and query parameters:
Path Parameters (1 parameters):
Name | Description | Default | Type |
---|---|---|---|
cacheName |
Required The name of the cache |
String |
Query Parameters (5 parameters):
Name | Description | Default | Type |
---|---|---|---|
defaultOperation (producer) |
To specify a default operation to use, if no operation header has been provided. There are 36 enums and the value can be one of: put, delete, get, update, query, getAll, clear, putIfAbsent, allAll, removeAll, retainAll, evict, evictAll, valueCount, containsKey, containsValue, keySet, removevalue, increment, decrement, setvalue, destroy, compareAndSet, getAndAdd, add, offer, peek, poll, remainingCapacity, drainTo, removeIf, take, publish, readOnceHeal, readOnceTail, capacity |
HazelcastOperation |
|
hazelcastInstance (producer) |
The hazelcast instance reference which can be used for hazelcast endpoint. |
HazelcastInstance |
|
hazelcastInstanceName (producer) |
The hazelcast instance reference name which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. |
String |
|
lazyStartProducer (producer) |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
boolean |
synchronous (advanced) |
Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported). |
false |
boolean |
ringbuffer cache producer
The ringbuffer producer provides 5 operations: * add * readonceHead * readonceTail * remainingCapacity * capacity
Header Variables for the request message:
Name | Type | Description |
---|---|---|
|
|
valid values are: put, get, removevalue, delete |
|
|
the object id to store / find your object inside the cache |
Sample for put:
Java DSL:
from("direct:put")
.setHeader(HazelcastConstants.OPERATION, constant(HazelcastOperation.ADD))
.to(String.format("hazelcast-%sbar", HazelcastConstants.RINGBUFFER_PREFIX));
Spring DSL:
<route>
<from uri="direct:put" />
<log message="put.."/>
<setHeader name="hazelcast.operation.type">
<constant>add</constant>
</setHeader>
<to uri="hazelcast-ringbuffer:foo" />
</route>
Spring Boot Auto-Configuration
When using hazelcast with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:
<dependency>
<groupId>org.apache.camel.springboot</groupId>
<artifactId>camel-hazelcast-starter</artifactId>
<version>x.x.x</version>
<!-- use the same version as your Camel core version -->
</dependency>
The component supports 85 options, which are listed below.
Name | Description | Default | Type |
---|---|---|---|
camel.component.hazelcast-atomicvalue.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.hazelcast-atomicvalue.customizer.hazelcast-instance.enabled |
Enable or disable the cache-manager customizer. |
true |
Boolean |
camel.component.hazelcast-atomicvalue.customizer.hazelcast-instance.override |
Configure if the cache manager eventually set on the component should be overridden by the customizer. |
false |
Boolean |
camel.component.hazelcast-atomicvalue.enabled |
Whether to enable auto configuration of the hazelcast-atomicvalue component. This is enabled by default. |
Boolean |
|
camel.component.hazelcast-atomicvalue.hazelcast-instance |
The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type. |
HazelcastInstance |
|
camel.component.hazelcast-atomicvalue.hazelcast-mode |
The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default. |
node |
String |
camel.component.hazelcast-atomicvalue.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.hazelcast-instance.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.hazelcast-instance.bridge-error-handler |
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
camel.component.hazelcast-instance.enabled |
Whether to enable auto configuration of the hazelcast-instance component. This is enabled by default. |
Boolean |
|
camel.component.hazelcast-instance.hazelcast-instance |
The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type. |
HazelcastInstance |
|
camel.component.hazelcast-instance.hazelcast-mode |
The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default. |
node |
String |
camel.component.hazelcast-list.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.hazelcast-list.bridge-error-handler |
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
camel.component.hazelcast-list.customizer.hazelcast-instance.enabled |
Enable or disable the cache-manager customizer. |
true |
Boolean |
camel.component.hazelcast-list.customizer.hazelcast-instance.override |
Configure if the cache manager eventually set on the component should be overridden by the customizer. |
false |
Boolean |
camel.component.hazelcast-list.enabled |
Whether to enable auto configuration of the hazelcast-list component. This is enabled by default. |
Boolean |
|
camel.component.hazelcast-list.hazelcast-instance |
The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type. |
HazelcastInstance |
|
camel.component.hazelcast-list.hazelcast-mode |
The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default. |
node |
String |
camel.component.hazelcast-list.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.hazelcast-map.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.hazelcast-map.bridge-error-handler |
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
camel.component.hazelcast-map.customizer.hazelcast-instance.enabled |
Enable or disable the cache-manager customizer. |
true |
Boolean |
camel.component.hazelcast-map.customizer.hazelcast-instance.override |
Configure if the cache manager eventually set on the component should be overridden by the customizer. |
false |
Boolean |
camel.component.hazelcast-map.enabled |
Whether to enable auto configuration of the hazelcast-map component. This is enabled by default. |
Boolean |
|
camel.component.hazelcast-map.hazelcast-instance |
The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type. |
HazelcastInstance |
|
camel.component.hazelcast-map.hazelcast-mode |
The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default. |
node |
String |
camel.component.hazelcast-map.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.hazelcast-multimap.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.hazelcast-multimap.bridge-error-handler |
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
camel.component.hazelcast-multimap.customizer.hazelcast-instance.enabled |
Enable or disable the cache-manager customizer. |
true |
Boolean |
camel.component.hazelcast-multimap.customizer.hazelcast-instance.override |
Configure if the cache manager eventually set on the component should be overridden by the customizer. |
false |
Boolean |
camel.component.hazelcast-multimap.enabled |
Whether to enable auto configuration of the hazelcast-multimap component. This is enabled by default. |
Boolean |
|
camel.component.hazelcast-multimap.hazelcast-instance |
The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type. |
HazelcastInstance |
|
camel.component.hazelcast-multimap.hazelcast-mode |
The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default. |
node |
String |
camel.component.hazelcast-multimap.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.hazelcast-queue.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.hazelcast-queue.bridge-error-handler |
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
camel.component.hazelcast-queue.customizer.hazelcast-instance.enabled |
Enable or disable the cache-manager customizer. |
true |
Boolean |
camel.component.hazelcast-queue.customizer.hazelcast-instance.override |
Configure if the cache manager eventually set on the component should be overridden by the customizer. |
false |
Boolean |
camel.component.hazelcast-queue.enabled |
Whether to enable auto configuration of the hazelcast-queue component. This is enabled by default. |
Boolean |
|
camel.component.hazelcast-queue.hazelcast-instance |
The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type. |
HazelcastInstance |
|
camel.component.hazelcast-queue.hazelcast-mode |
The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default. |
node |
String |
camel.component.hazelcast-queue.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.hazelcast-replicatedmap.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.hazelcast-replicatedmap.bridge-error-handler |
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
camel.component.hazelcast-replicatedmap.customizer.hazelcast-instance.enabled |
Enable or disable the cache-manager customizer. |
true |
Boolean |
camel.component.hazelcast-replicatedmap.customizer.hazelcast-instance.override |
Configure if the cache manager eventually set on the component should be overridden by the customizer. |
false |
Boolean |
camel.component.hazelcast-replicatedmap.enabled |
Whether to enable auto configuration of the hazelcast-replicatedmap component. This is enabled by default. |
Boolean |
|
camel.component.hazelcast-replicatedmap.hazelcast-instance |
The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type. |
HazelcastInstance |
|
camel.component.hazelcast-replicatedmap.hazelcast-mode |
The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default. |
node |
String |
camel.component.hazelcast-replicatedmap.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.hazelcast-ringbuffer.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.hazelcast-ringbuffer.customizer.hazelcast-instance.enabled |
Enable or disable the cache-manager customizer. |
true |
Boolean |
camel.component.hazelcast-ringbuffer.customizer.hazelcast-instance.override |
Configure if the cache manager eventually set on the component should be overridden by the customizer. |
false |
Boolean |
camel.component.hazelcast-ringbuffer.enabled |
Whether to enable auto configuration of the hazelcast-ringbuffer component. This is enabled by default. |
Boolean |
|
camel.component.hazelcast-ringbuffer.hazelcast-instance |
The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type. |
HazelcastInstance |
|
camel.component.hazelcast-ringbuffer.hazelcast-mode |
The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default. |
node |
String |
camel.component.hazelcast-ringbuffer.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.hazelcast-seda.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.hazelcast-seda.bridge-error-handler |
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
camel.component.hazelcast-seda.customizer.hazelcast-instance.enabled |
Enable or disable the cache-manager customizer. |
true |
Boolean |
camel.component.hazelcast-seda.customizer.hazelcast-instance.override |
Configure if the cache manager eventually set on the component should be overridden by the customizer. |
false |
Boolean |
camel.component.hazelcast-seda.enabled |
Whether to enable auto configuration of the hazelcast-seda component. This is enabled by default. |
Boolean |
|
camel.component.hazelcast-seda.hazelcast-instance |
The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type. |
HazelcastInstance |
|
camel.component.hazelcast-seda.hazelcast-mode |
The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default. |
node |
String |
camel.component.hazelcast-seda.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.hazelcast-set.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.hazelcast-set.bridge-error-handler |
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
camel.component.hazelcast-set.customizer.hazelcast-instance.enabled |
Enable or disable the cache-manager customizer. |
true |
Boolean |
camel.component.hazelcast-set.customizer.hazelcast-instance.override |
Configure if the cache manager eventually set on the component should be overridden by the customizer. |
false |
Boolean |
camel.component.hazelcast-set.enabled |
Whether to enable auto configuration of the hazelcast-set component. This is enabled by default. |
Boolean |
|
camel.component.hazelcast-set.hazelcast-instance |
The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type. |
HazelcastInstance |
|
camel.component.hazelcast-set.hazelcast-mode |
The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default. |
node |
String |
camel.component.hazelcast-set.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.hazelcast-topic.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.hazelcast-topic.bridge-error-handler |
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
camel.component.hazelcast-topic.customizer.hazelcast-instance.enabled |
Enable or disable the cache-manager customizer. |
true |
Boolean |
camel.component.hazelcast-topic.customizer.hazelcast-instance.enabled |
Enable or disable the cache-manager customizer. |
true |
Boolean |
camel.component.hazelcast-topic.customizer.hazelcast-instance.override |
Configure if the cache manager eventually set on the component should be overridden by the customizer. |
false |
Boolean |
camel.component.hazelcast-topic.customizer.hazelcast-instance.override |
Configure if the cache manager eventually set on the component should be overridden by the customizer. |
false |
Boolean |
camel.component.hazelcast-topic.enabled |
Whether to enable auto configuration of the hazelcast-topic component. This is enabled by default. |
Boolean |
|
camel.component.hazelcast-topic.hazelcast-instance |
The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type. |
HazelcastInstance |
|
camel.component.hazelcast-topic.hazelcast-mode |
The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default. |
node |
String |
camel.component.hazelcast-topic.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |