Atomix Map

Since Camel 2.20

Both producer and consumer are supported

The camel Atomix-Map component allows you to work with Atomix’s Distributed Map collection.

Maven users will need to add the following dependency to their pom.xml for this component:

    <dependency>
        <groupId>org.apache.camel</groupId>
        <artifactId>camel-atomix</artifactId>
        <version>${camel-version}</version>
    </dependency>

URI format

    atomix-map:mapName

Options

The Atomix Map component supports 18 options, which are listed below.

Name	Description	Default	Type
atomix (common)	The Atomix instance to use		Atomix
configuration (common)	The shared component configuration		AtomixMapConfiguration
configurationUri (common)	The path to the AtomixClient configuration		String
defaultAction (common)	The default action. There are 12 enums and the value can be one of: PUT, PUT_IF_ABSENT, GET, CLEAR, SIZE, CONTAINS_KEY, CONTAINS_VALUE, IS_EMPTY, ENTRY_SET, REMOVE, REPLACE, VALUES	PUT	Action
key (common)	The key to use if none is set in the header or to listen for events for a specific key.		Object
nodes (common)	The nodes the AtomixClient should connect to		List
resultHeader (common)	The header that wil carry the result.		String
transportClassName (common)	The class name (fqn) of the Atomix transport	io.atomix.catalyst.transport.netty.NettyTransport	String
ttl (common)	The resource ttl.		long
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
defaultResourceConfig (advanced)	The cluster wide default resource configuration.		Properties
defaultResourceOptions (advanced)	The local default resource options.		Properties
ephemeral (advanced)	Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.	false	boolean
readConsistency (advanced)	The read consistency level. There are 4 enums and the value can be one of: ATOMIC, ATOMIC_LEASE, SEQUENTIAL, LOCAL		ReadConsistency
resourceConfigs (advanced)	Cluster wide resources configuration.		Map
resourceOptions (advanced)	Local resources configurations		Map

Name

Description

Default

Type

atomix (common)

The Atomix instance to use

Atomix

configuration (common)

The shared component configuration

AtomixMapConfiguration

configurationUri (common)

The path to the AtomixClient configuration

String

defaultAction (common)

The default action. There are 12 enums and the value can be one of: PUT, PUT_IF_ABSENT, GET, CLEAR, SIZE, CONTAINS_KEY, CONTAINS_VALUE, IS_EMPTY, ENTRY_SET, REMOVE, REPLACE, VALUES

PUT

Action

key (common)

The key to use if none is set in the header or to listen for events for a specific key.

Object

nodes (common)

The nodes the AtomixClient should connect to

List

resultHeader (common)

The header that wil carry the result.

String

transportClassName (common)

The class name (fqn) of the Atomix transport

io.atomix.catalyst.transport.netty.NettyTransport

String

ttl (common)

The resource ttl.

long

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

defaultResourceConfig (advanced)

The cluster wide default resource configuration.

Properties

defaultResourceOptions (advanced)

The local default resource options.

Properties

ephemeral (advanced)

Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.

false

boolean

readConsistency (advanced)

The read consistency level. There are 4 enums and the value can be one of: ATOMIC, ATOMIC_LEASE, SEQUENTIAL, LOCAL

ReadConsistency

resourceConfigs (advanced)

Cluster wide resources configuration.

Map

resourceOptions (advanced)

Local resources configurations

Map

The Atomix Map endpoint is configured using URI syntax:

atomix-map:resourceName

with the following path and query parameters:

Path Parameters (1 parameters):

Name	Description	Default	Type
resourceName	Required The distributed resource name		String

Name

Description

Default

Type

resourceName

Required The distributed resource name

String

Query Parameters (18 parameters):

Name	Description	Default	Type
atomix (common)	The Atomix instance to use		Atomix
configurationUri (common)	The Atomix configuration uri.		String
defaultAction (common)	The default action. There are 12 enums and the value can be one of: PUT, PUT_IF_ABSENT, GET, CLEAR, SIZE, CONTAINS_KEY, CONTAINS_VALUE, IS_EMPTY, ENTRY_SET, REMOVE, REPLACE, VALUES	PUT	Action
key (common)	The key to use if none is set in the header or to listen for events for a specific key.		Object
nodes (common)	The address of the nodes composing the cluster.		String
resultHeader (common)	The header that wil carry the result.		String
transportClassName (common)	The class name (fqn) of the Atomix transport	io.atomix.catalyst.transport.netty.NettyTransport	String
ttl (common)	The resource ttl.		long
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
exceptionHandler (consumer)	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer)	Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut		ExchangePattern
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
defaultResourceConfig (advanced)	The cluster wide default resource configuration.		Properties
defaultResourceOptions (advanced)	The local default resource options.		Properties
ephemeral (advanced)	Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.	false	boolean
readConsistency (advanced)	The read consistency level. There are 4 enums and the value can be one of: ATOMIC, ATOMIC_LEASE, SEQUENTIAL, LOCAL		ReadConsistency
resourceConfigs (advanced)	Cluster wide resources configuration.		Map
resourceOptions (advanced)	Local resources configurations		Map

Name

Description

Default

Type

atomix (common)

The Atomix instance to use

Atomix

configurationUri (common)

The Atomix configuration uri.

String

defaultAction (common)

The default action. There are 12 enums and the value can be one of: PUT, PUT_IF_ABSENT, GET, CLEAR, SIZE, CONTAINS_KEY, CONTAINS_VALUE, IS_EMPTY, ENTRY_SET, REMOVE, REPLACE, VALUES

PUT

Action

key (common)

The key to use if none is set in the header or to listen for events for a specific key.

Object

nodes (common)

The address of the nodes composing the cluster.

String

resultHeader (common)

The header that wil carry the result.

String

transportClassName (common)

The class name (fqn) of the Atomix transport

io.atomix.catalyst.transport.netty.NettyTransport

String

ttl (common)

The resource ttl.

long

bridgeErrorHandler (consumer)

false

boolean

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

lazyStartProducer (producer)

false

boolean

defaultResourceConfig (advanced)

The cluster wide default resource configuration.

Properties

defaultResourceOptions (advanced)

The local default resource options.

Properties

ephemeral (advanced)

Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.

false

boolean

readConsistency (advanced)

The read consistency level. There are 4 enums and the value can be one of: ATOMIC, ATOMIC_LEASE, SEQUENTIAL, LOCAL

ReadConsistency

resourceConfigs (advanced)

Cluster wide resources configuration.

Map

resourceOptions (advanced)

Local resources configurations

Map

Headers

Name	Type	Values	Description
CamelAtomixResourceAction	AtomixMap.Action	PUT PUT_IF_ABSENT GET CLEAR SIZE CONTAINS_KEY CONTAINS_VALUE IS_EMPTY ENTRY_SET REMOVE REPLACE VALUES	The action to perform
CamelAtomixResourceKey	Object	-	The key to operate on
CamelAtomixResourceValue	Object	-	The value, if missing In Body is used
CamelAtomixResourceOldValue	Object	-	The old value
CamelAtomixResourceTTL	String / long	-	The entry TTL
CamelAtomixResourceReadConsistency	ReadConsistency	ATOMIC ATOMIC_LEASE SEQUENTIAL LOCAL	The read consistency level

Name

Type

Values

Description

CamelAtomixResourceAction

AtomixMap.Action

PUT
PUT_IF_ABSENT
GET
CLEAR
SIZE
CONTAINS_KEY
CONTAINS_VALUE
IS_EMPTY
ENTRY_SET
REMOVE
REPLACE
VALUES

The action to perform

CamelAtomixResourceKey

Object

The key to operate on

CamelAtomixResourceValue

Object

The value, if missing In Body is used

CamelAtomixResourceOldValue

Object

The old value

CamelAtomixResourceTTL

String / long

The entry TTL

CamelAtomixResourceReadConsistency

ReadConsistency

ATOMIC
ATOMIC_LEASE
SEQUENTIAL
LOCAL

The read consistency level

Configuring the component to connect to an Atomix cluster

The nodes of the Atomix cluster you want to join can be se at Endpoint or component level (recommended), below some examples:

Endpoint:

<beans xmlns="...">
    <camelContext xmlns="http://camel.apache.org/schema/spring">
        <from uri="direct:start"/>
            <to uri="atomix-map:myMap?nodes=node-1.atomix.cluster:8700,node-2.atomix.cluster:8700"/>
        </route>
    </camelContext>
</beans>

Component:

<beans xmlns="...">
    <bean id="atomix-map" class="org.apache.camel.component.atomix.client.map.AtomixMapComponent">
        <property name="nodes" value="nodes=node-1.atomix.cluster:8700,node-2.atomix.cluster:8700"/>
    </bean>

    <camelContext xmlns="http://camel.apache.org/schema/spring">
        <from uri="direct:start"/>
            <to uri="atomix-map:myMap"/>
        </route>
    </camelContext>
</beans>

Usage examples:

PUT an element with TTL of 1 second:

FluentProducerTemplate.on(context)
    .withHeader(AtomixClientConstants.RESOURCE_ACTION, AtomixMap.Action.PUT)
    .withHeader(AtomixClientConstants.RESOURCE_KEY, key)
    .withHeader(AtomixClientConstants.RESOURCE_TTL, "1s")
    .withBody(val)
    .to("direct:start")
    .send();

Spring Boot Auto-Configuration

When using atomix with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-atomix-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 121 options, which are listed below.

Name	Description	Default	Type
camel.cluster.atomix.address	The address of the node - node only.		String
camel.cluster.atomix.attributes	Custom service attributes.		Map
camel.cluster.atomix.configuration-uri	The Atomix configuration uri.		String
camel.cluster.atomix.enabled	Sets if the atomix cluster service should be enabled or not, default is false.	false	Boolean
camel.cluster.atomix.ephemeral	Sets if the local member should join groups as PersistentMember or not (node only).		Boolean
camel.cluster.atomix.id	The cluster id.		String
camel.cluster.atomix.mode	Sets the cluster mode.		AtomixClusterServiceConfiguration$Mode
camel.cluster.atomix.nodes	The address of the nodes composing the cluster.		Set
camel.cluster.atomix.order	Service lookup order/priority.		Integer
camel.cluster.atomix.storage-level	The storage mode - node only.		StorageLevel
camel.cluster.atomix.storage-path	The storage directory - node only.		String
camel.component.atomix-map.atomix	The Atomix instance to use. The option is a io.atomix.Atomix type.		Atomix
camel.component.atomix-map.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.atomix-map.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.atomix-map.configuration	The shared component configuration. The option is a org.apache.camel.component.atomix.client.map.AtomixMapConfiguration type.		AtomixMapConfiguration
camel.component.atomix-map.configuration-uri	The path to the AtomixClient configuration		String
camel.component.atomix-map.default-action	The default action.		AtomixMap$Action
camel.component.atomix-map.default-resource-config	The cluster wide default resource configuration. The option is a java.util.Properties type.		Properties
camel.component.atomix-map.default-resource-options	The local default resource options. The option is a java.util.Properties type.		Properties
camel.component.atomix-map.enabled	Whether to enable auto configuration of the atomix-map component. This is enabled by default.		Boolean
camel.component.atomix-map.ephemeral	Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.	false	Boolean
camel.component.atomix-map.key	The key to use if none is set in the header or to listen for events for a specific key. The option is a java.lang.Object type.		Object
camel.component.atomix-map.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.atomix-map.nodes	The nodes the AtomixClient should connect to		List
camel.component.atomix-map.read-consistency	The read consistency level.		ReadConsistency
camel.component.atomix-map.resource-configs	Cluster wide resources configuration.		Map
camel.component.atomix-map.resource-options	Local resources configurations		Map
camel.component.atomix-map.result-header	The header that wil carry the result.		String
camel.component.atomix-map.transport-class-name	The class name (fqn) of the Atomix transport	io.atomix.catalyst.transport.netty.NettyTransport	String
camel.component.atomix-map.ttl	The resource ttl. The option is a long type.		Long
camel.component.atomix-messaging.atomix	The Atomix instance to use. The option is a io.atomix.Atomix type.		Atomix
camel.component.atomix-messaging.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.atomix-messaging.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.atomix-messaging.broadcast-type	The broadcast type.		AtomixMessaging$BroadcastType
camel.component.atomix-messaging.channel-name	The messaging channel name		String
camel.component.atomix-messaging.configuration	The shared component configuration. The option is a org.apache.camel.component.atomix.client.messaging.AtomixMessagingConfiguration type.		AtomixMessagingConfiguration
camel.component.atomix-messaging.configuration-uri	The path to the AtomixClient configuration		String
camel.component.atomix-messaging.default-action	The default action.		AtomixMessaging$Action
camel.component.atomix-messaging.default-resource-config	The cluster wide default resource configuration. The option is a java.util.Properties type.		Properties
camel.component.atomix-messaging.default-resource-options	The local default resource options. The option is a java.util.Properties type.		Properties
camel.component.atomix-messaging.enabled	Whether to enable auto configuration of the atomix-messaging component. This is enabled by default.		Boolean
camel.component.atomix-messaging.ephemeral	Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.	false	Boolean
camel.component.atomix-messaging.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.atomix-messaging.member-name	The Atomix Group member name		String
camel.component.atomix-messaging.nodes	The nodes the AtomixClient should connect to		List
camel.component.atomix-messaging.read-consistency	The read consistency level.		ReadConsistency
camel.component.atomix-messaging.resource-configs	Cluster wide resources configuration.		Map
camel.component.atomix-messaging.resource-options	Local resources configurations		Map
camel.component.atomix-messaging.result-header	The header that wil carry the result.		String
camel.component.atomix-messaging.transport-class-name	The class name (fqn) of the Atomix transport	io.atomix.catalyst.transport.netty.NettyTransport	String
camel.component.atomix-multimap.atomix	The Atomix instance to use. The option is a io.atomix.Atomix type.		Atomix
camel.component.atomix-multimap.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.atomix-multimap.configuration	The shared component configuration. The option is a org.apache.camel.component.atomix.client.multimap.AtomixMultiMapConfiguration type.		AtomixMultiMapConfiguration
camel.component.atomix-multimap.configuration-uri	The path to the AtomixClient configuration		String
camel.component.atomix-multimap.default-action	The default action.		AtomixMultiMap$Action
camel.component.atomix-multimap.default-resource-config	The cluster wide default resource configuration. The option is a java.util.Properties type.		Properties
camel.component.atomix-multimap.default-resource-options	The local default resource options. The option is a java.util.Properties type.		Properties
camel.component.atomix-multimap.enabled	Whether to enable auto configuration of the atomix-multimap component. This is enabled by default.		Boolean
camel.component.atomix-multimap.ephemeral	Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.	false	Boolean
camel.component.atomix-multimap.key	The key to use if none is set in the header or to listen for events for a specific key. The option is a java.lang.Object type.		Object
camel.component.atomix-multimap.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.atomix-multimap.nodes	The nodes the AtomixClient should connect to		List
camel.component.atomix-multimap.read-consistency	The read consistency level.		ReadConsistency
camel.component.atomix-multimap.resource-configs	Cluster wide resources configuration.		Map
camel.component.atomix-multimap.resource-options	Local resources configurations		Map
camel.component.atomix-multimap.result-header	The header that wil carry the result.		String
camel.component.atomix-multimap.transport-class-name	The class name (fqn) of the Atomix transport	io.atomix.catalyst.transport.netty.NettyTransport	String
camel.component.atomix-multimap.ttl	The resource ttl. The option is a long type.		Long
camel.component.atomix-queue.atomix	The Atomix instance to use. The option is a io.atomix.Atomix type.		Atomix
camel.component.atomix-queue.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.atomix-queue.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.atomix-queue.configuration	The shared component configuration. The option is a org.apache.camel.component.atomix.client.queue.AtomixQueueConfiguration type.		AtomixQueueConfiguration
camel.component.atomix-queue.configuration-uri	The path to the AtomixClient configuration		String
camel.component.atomix-queue.default-action	The default action.		AtomixQueue$Action
camel.component.atomix-queue.default-resource-config	The cluster wide default resource configuration. The option is a java.util.Properties type.		Properties
camel.component.atomix-queue.default-resource-options	The local default resource options. The option is a java.util.Properties type.		Properties
camel.component.atomix-queue.enabled	Whether to enable auto configuration of the atomix-queue component. This is enabled by default.		Boolean
camel.component.atomix-queue.ephemeral	Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.	false	Boolean
camel.component.atomix-queue.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.atomix-queue.nodes	The nodes the AtomixClient should connect to		List
camel.component.atomix-queue.read-consistency	The read consistency level.		ReadConsistency
camel.component.atomix-queue.resource-configs	Cluster wide resources configuration.		Map
camel.component.atomix-queue.resource-options	Local resources configurations		Map
camel.component.atomix-queue.result-header	The header that wil carry the result.		String
camel.component.atomix-queue.transport-class-name	The class name (fqn) of the Atomix transport	io.atomix.catalyst.transport.netty.NettyTransport	String
camel.component.atomix-set.atomix	The Atomix instance to use. The option is a io.atomix.Atomix type.		Atomix
camel.component.atomix-set.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.atomix-set.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.atomix-set.configuration	The shared component configuration. The option is a org.apache.camel.component.atomix.client.set.AtomixSetConfiguration type.		AtomixSetConfiguration
camel.component.atomix-set.configuration-uri	The path to the AtomixClient configuration		String
camel.component.atomix-set.default-action	The default action.		AtomixSet$Action
camel.component.atomix-set.default-resource-config	The cluster wide default resource configuration. The option is a java.util.Properties type.		Properties
camel.component.atomix-set.default-resource-options	The local default resource options. The option is a java.util.Properties type.		Properties
camel.component.atomix-set.enabled	Whether to enable auto configuration of the atomix-set component. This is enabled by default.		Boolean
camel.component.atomix-set.ephemeral	Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.	false	Boolean
camel.component.atomix-set.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.atomix-set.nodes	The nodes the AtomixClient should connect to		List
camel.component.atomix-set.read-consistency	The read consistency level.		ReadConsistency
camel.component.atomix-set.resource-configs	Cluster wide resources configuration.		Map
camel.component.atomix-set.resource-options	Local resources configurations		Map
camel.component.atomix-set.result-header	The header that wil carry the result.		String
camel.component.atomix-set.transport-class-name	The class name (fqn) of the Atomix transport	io.atomix.catalyst.transport.netty.NettyTransport	String
camel.component.atomix-set.ttl	The resource ttl. The option is a long type.		Long
camel.component.atomix-value.atomix	The Atomix instance to use. The option is a io.atomix.Atomix type.		Atomix
camel.component.atomix-value.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.atomix-value.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.atomix-value.configuration	The shared component configuration. The option is a org.apache.camel.component.atomix.client.value.AtomixValueConfiguration type.		AtomixValueConfiguration
camel.component.atomix-value.configuration-uri	The path to the AtomixClient configuration		String
camel.component.atomix-value.default-action	The default action.		AtomixValue$Action
camel.component.atomix-value.default-resource-config	The cluster wide default resource configuration. The option is a java.util.Properties type.		Properties
camel.component.atomix-value.default-resource-options	The local default resource options. The option is a java.util.Properties type.		Properties
camel.component.atomix-value.enabled	Whether to enable auto configuration of the atomix-value component. This is enabled by default.		Boolean
camel.component.atomix-value.ephemeral	Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.	false	Boolean
camel.component.atomix-value.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.atomix-value.nodes	The nodes the AtomixClient should connect to		List
camel.component.atomix-value.read-consistency	The read consistency level.		ReadConsistency
camel.component.atomix-value.resource-configs	Cluster wide resources configuration.		Map
camel.component.atomix-value.resource-options	Local resources configurations		Map
camel.component.atomix-value.result-header	The header that wil carry the result.		String
camel.component.atomix-value.transport-class-name	The class name (fqn) of the Atomix transport	io.atomix.catalyst.transport.netty.NettyTransport	String
camel.component.atomix-value.ttl	The resource ttl. The option is a long type.		Long

Name

Description

Default

Type

camel.cluster.atomix.address

The address of the node - node only.

String

camel.cluster.atomix.attributes

Custom service attributes.

Map

camel.cluster.atomix.configuration-uri

The Atomix configuration uri.

String

camel.cluster.atomix.enabled

Sets if the atomix cluster service should be enabled or not, default is false.

false

Boolean

camel.cluster.atomix.ephemeral

Sets if the local member should join groups as PersistentMember or not (node only).

Boolean

camel.cluster.atomix.id

The cluster id.

String

camel.cluster.atomix.mode

Sets the cluster mode.

AtomixClusterServiceConfiguration$Mode

camel.cluster.atomix.nodes

The address of the nodes composing the cluster.

Set

camel.cluster.atomix.order

Service lookup order/priority.

Integer

camel.cluster.atomix.storage-level

The storage mode - node only.

StorageLevel

camel.cluster.atomix.storage-path

The storage directory - node only.

String

camel.component.atomix-map.atomix

The Atomix instance to use. The option is a io.atomix.Atomix type.

Atomix

camel.component.atomix-map.autowired-enabled

true

Boolean

camel.component.atomix-map.bridge-error-handler

false

Boolean

camel.component.atomix-map.configuration

The shared component configuration. The option is a org.apache.camel.component.atomix.client.map.AtomixMapConfiguration type.

AtomixMapConfiguration

camel.component.atomix-map.configuration-uri

The path to the AtomixClient configuration

String

camel.component.atomix-map.default-action

The default action.

AtomixMap$Action

camel.component.atomix-map.default-resource-config

The cluster wide default resource configuration. The option is a java.util.Properties type.

Properties

camel.component.atomix-map.default-resource-options

The local default resource options. The option is a java.util.Properties type.

Properties

camel.component.atomix-map.enabled

Whether to enable auto configuration of the atomix-map component. This is enabled by default.

Boolean

camel.component.atomix-map.ephemeral

Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.

false

Boolean

camel.component.atomix-map.key

The key to use if none is set in the header or to listen for events for a specific key. The option is a java.lang.Object type.

Object

camel.component.atomix-map.lazy-start-producer

false

Boolean

camel.component.atomix-map.nodes

The nodes the AtomixClient should connect to

List

camel.component.atomix-map.read-consistency

The read consistency level.

ReadConsistency

camel.component.atomix-map.resource-configs

Cluster wide resources configuration.

Map

camel.component.atomix-map.resource-options

Local resources configurations

Map

camel.component.atomix-map.result-header

The header that wil carry the result.

String

camel.component.atomix-map.transport-class-name

The class name (fqn) of the Atomix transport

io.atomix.catalyst.transport.netty.NettyTransport

String

camel.component.atomix-map.ttl

The resource ttl. The option is a long type.

Long

camel.component.atomix-messaging.atomix

The Atomix instance to use. The option is a io.atomix.Atomix type.

Atomix

camel.component.atomix-messaging.autowired-enabled

true

Boolean

camel.component.atomix-messaging.bridge-error-handler

false

Boolean

camel.component.atomix-messaging.broadcast-type

The broadcast type.

AtomixMessaging$BroadcastType

camel.component.atomix-messaging.channel-name

The messaging channel name

String

camel.component.atomix-messaging.configuration

The shared component configuration. The option is a org.apache.camel.component.atomix.client.messaging.AtomixMessagingConfiguration type.

AtomixMessagingConfiguration

camel.component.atomix-messaging.configuration-uri

The path to the AtomixClient configuration

String

camel.component.atomix-messaging.default-action

The default action.

AtomixMessaging$Action

camel.component.atomix-messaging.default-resource-config

The cluster wide default resource configuration. The option is a java.util.Properties type.

Properties

camel.component.atomix-messaging.default-resource-options

The local default resource options. The option is a java.util.Properties type.

Properties

camel.component.atomix-messaging.enabled

Whether to enable auto configuration of the atomix-messaging component. This is enabled by default.

Boolean

camel.component.atomix-messaging.ephemeral

Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.

false

Boolean

camel.component.atomix-messaging.lazy-start-producer

false

Boolean

camel.component.atomix-messaging.member-name

The Atomix Group member name

String

camel.component.atomix-messaging.nodes

The nodes the AtomixClient should connect to

List

camel.component.atomix-messaging.read-consistency

The read consistency level.

ReadConsistency

camel.component.atomix-messaging.resource-configs

Cluster wide resources configuration.

Map

camel.component.atomix-messaging.resource-options

Local resources configurations

Map

camel.component.atomix-messaging.result-header

The header that wil carry the result.

String

camel.component.atomix-messaging.transport-class-name

The class name (fqn) of the Atomix transport

io.atomix.catalyst.transport.netty.NettyTransport

String

camel.component.atomix-multimap.atomix

The Atomix instance to use. The option is a io.atomix.Atomix type.

Atomix

camel.component.atomix-multimap.autowired-enabled

true

Boolean

camel.component.atomix-multimap.configuration

The shared component configuration. The option is a org.apache.camel.component.atomix.client.multimap.AtomixMultiMapConfiguration type.

AtomixMultiMapConfiguration

camel.component.atomix-multimap.configuration-uri

The path to the AtomixClient configuration

String

camel.component.atomix-multimap.default-action

The default action.

AtomixMultiMap$Action

camel.component.atomix-multimap.default-resource-config

The cluster wide default resource configuration. The option is a java.util.Properties type.

Properties

camel.component.atomix-multimap.default-resource-options

The local default resource options. The option is a java.util.Properties type.

Properties

camel.component.atomix-multimap.enabled

Whether to enable auto configuration of the atomix-multimap component. This is enabled by default.

Boolean

camel.component.atomix-multimap.ephemeral

Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.

false

Boolean

camel.component.atomix-multimap.key

The key to use if none is set in the header or to listen for events for a specific key. The option is a java.lang.Object type.

Object

camel.component.atomix-multimap.lazy-start-producer

false

Boolean

camel.component.atomix-multimap.nodes

The nodes the AtomixClient should connect to

List

camel.component.atomix-multimap.read-consistency

The read consistency level.

ReadConsistency

camel.component.atomix-multimap.resource-configs

Cluster wide resources configuration.

Map

camel.component.atomix-multimap.resource-options

Local resources configurations

Map

camel.component.atomix-multimap.result-header

The header that wil carry the result.

String

camel.component.atomix-multimap.transport-class-name

The class name (fqn) of the Atomix transport

io.atomix.catalyst.transport.netty.NettyTransport

String

camel.component.atomix-multimap.ttl

The resource ttl. The option is a long type.

Long

camel.component.atomix-queue.atomix

The Atomix instance to use. The option is a io.atomix.Atomix type.

Atomix

camel.component.atomix-queue.autowired-enabled

true

Boolean

camel.component.atomix-queue.bridge-error-handler

false

Boolean

camel.component.atomix-queue.configuration

The shared component configuration. The option is a org.apache.camel.component.atomix.client.queue.AtomixQueueConfiguration type.

AtomixQueueConfiguration

camel.component.atomix-queue.configuration-uri

The path to the AtomixClient configuration

String

camel.component.atomix-queue.default-action

The default action.

AtomixQueue$Action

camel.component.atomix-queue.default-resource-config

The cluster wide default resource configuration. The option is a java.util.Properties type.

Properties

camel.component.atomix-queue.default-resource-options

The local default resource options. The option is a java.util.Properties type.

Properties

camel.component.atomix-queue.enabled

Whether to enable auto configuration of the atomix-queue component. This is enabled by default.

Boolean

camel.component.atomix-queue.ephemeral

Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.

false

Boolean

camel.component.atomix-queue.lazy-start-producer

false

Boolean

camel.component.atomix-queue.nodes

The nodes the AtomixClient should connect to

List

camel.component.atomix-queue.read-consistency

The read consistency level.

ReadConsistency

camel.component.atomix-queue.resource-configs

Cluster wide resources configuration.

Map

camel.component.atomix-queue.resource-options

Local resources configurations

Map

camel.component.atomix-queue.result-header

The header that wil carry the result.

String

camel.component.atomix-queue.transport-class-name

The class name (fqn) of the Atomix transport

io.atomix.catalyst.transport.netty.NettyTransport

String

camel.component.atomix-set.atomix

The Atomix instance to use. The option is a io.atomix.Atomix type.

Atomix

camel.component.atomix-set.autowired-enabled

true

Boolean

camel.component.atomix-set.bridge-error-handler

false

Boolean

camel.component.atomix-set.configuration

The shared component configuration. The option is a org.apache.camel.component.atomix.client.set.AtomixSetConfiguration type.

AtomixSetConfiguration

camel.component.atomix-set.configuration-uri

The path to the AtomixClient configuration

String

camel.component.atomix-set.default-action

The default action.

AtomixSet$Action

camel.component.atomix-set.default-resource-config

The cluster wide default resource configuration. The option is a java.util.Properties type.

Properties

camel.component.atomix-set.default-resource-options

The local default resource options. The option is a java.util.Properties type.

Properties

camel.component.atomix-set.enabled

Whether to enable auto configuration of the atomix-set component. This is enabled by default.

Boolean

camel.component.atomix-set.ephemeral

Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.

false

Boolean

camel.component.atomix-set.lazy-start-producer

false

Boolean

camel.component.atomix-set.nodes

The nodes the AtomixClient should connect to

List

camel.component.atomix-set.read-consistency

The read consistency level.

ReadConsistency

camel.component.atomix-set.resource-configs

Cluster wide resources configuration.

Map

camel.component.atomix-set.resource-options

Local resources configurations

Map

camel.component.atomix-set.result-header

The header that wil carry the result.

String

camel.component.atomix-set.transport-class-name

The class name (fqn) of the Atomix transport

io.atomix.catalyst.transport.netty.NettyTransport

String

camel.component.atomix-set.ttl

The resource ttl. The option is a long type.

Long

camel.component.atomix-value.atomix

The Atomix instance to use. The option is a io.atomix.Atomix type.

Atomix

camel.component.atomix-value.autowired-enabled

true

Boolean

camel.component.atomix-value.bridge-error-handler

false

Boolean

camel.component.atomix-value.configuration

The shared component configuration. The option is a org.apache.camel.component.atomix.client.value.AtomixValueConfiguration type.

AtomixValueConfiguration

camel.component.atomix-value.configuration-uri

The path to the AtomixClient configuration

String

camel.component.atomix-value.default-action

The default action.

AtomixValue$Action

camel.component.atomix-value.default-resource-config

The cluster wide default resource configuration. The option is a java.util.Properties type.

Properties

camel.component.atomix-value.default-resource-options

The local default resource options. The option is a java.util.Properties type.

Properties

camel.component.atomix-value.enabled

Whether to enable auto configuration of the atomix-value component. This is enabled by default.

Boolean

camel.component.atomix-value.ephemeral

Sets if the local member should join groups as PersistentMember or not. If set to ephemeral the local member will receive an auto generated ID thus the local one is ignored.

false

Boolean

camel.component.atomix-value.lazy-start-producer

false

Boolean

camel.component.atomix-value.nodes

The nodes the AtomixClient should connect to

List

camel.component.atomix-value.read-consistency

The read consistency level.

ReadConsistency

camel.component.atomix-value.resource-configs

Cluster wide resources configuration.

Map

camel.component.atomix-value.resource-options

Local resources configurations

Map

camel.component.atomix-value.result-header

The header that wil carry the result.

String

camel.component.atomix-value.transport-class-name

The class name (fqn) of the Atomix transport

io.atomix.catalyst.transport.netty.NettyTransport

String

camel.component.atomix-value.ttl

The resource ttl. The option is a long type.

Long