AWS Key Management Service (KMS)

Since Camel 3.1

Only producer is supported

The AWS2 KMS component supports the ability to work with keys stored in AWS KMS instances.

Prerequisites

You must have a valid Amazon Web Services developer account, and be signed up to use Amazon KMS. More information is available at Amazon KMS.

The AWS2 KMS component is not supported in OSGI

URI Format

aws2-kms://label[?options]

You can append query options to the URI in the following format, ?options=value&option2=value&…​

URI Options

The AWS Key Management Service (KMS) component supports 16 options, which are listed below.

Name Description Default Type

configuration (producer)

Component configuration

KMS2Configuration

kmsClient (producer)

Autowired To use a existing configured AWS KMS as client

KmsClient

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

operation (producer)

Required The operation to perform. There are 6 enums and the value can be one of: listKeys, createKey, disableKey, scheduleKeyDeletion, describeKey, enableKey

KMS2Operations

overrideEndpoint (producer)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option

false

boolean

pojoRequest (producer)

If we want to use a POJO request as body or not

false

boolean

proxyHost (producer)

To define a proxy host when instantiating the KMS client

String

proxyPort (producer)

To define a proxy port when instantiating the KMS client

Integer

proxyProtocol (producer)

To define a proxy protocol when instantiating the KMS client. There are 2 enums and the value can be one of: HTTP, HTTPS

HTTPS

Protocol

region (producer)

The region in which EKS client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id()

String

trustAllCertificates (producer)

If we want to trust all certificates in case of overriding the endpoint

false

boolean

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option

String

useDefaultCredentialsProvider (producer)

Set whether the KMS client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

accessKey (security)

Amazon AWS Access Key

String

secretKey (security)

Amazon AWS Secret Key

String

The AWS Key Management Service (KMS) endpoint is configured using URI syntax:

aws2-kms:label

with the following path and query parameters:

Path Parameters (1 parameters):

Name Description Default Type

label

Required Logical name

String

Query Parameters (14 parameters):

Name Description Default Type

kmsClient (producer)

Autowired To use a existing configured AWS KMS as client

KmsClient

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

operation (producer)

Required The operation to perform. There are 6 enums and the value can be one of: listKeys, createKey, disableKey, scheduleKeyDeletion, describeKey, enableKey

KMS2Operations

overrideEndpoint (producer)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option

false

boolean

pojoRequest (producer)

If we want to use a POJO request as body or not

false

boolean

proxyHost (producer)

To define a proxy host when instantiating the KMS client

String

proxyPort (producer)

To define a proxy port when instantiating the KMS client

Integer

proxyProtocol (producer)

To define a proxy protocol when instantiating the KMS client. There are 2 enums and the value can be one of: HTTP, HTTPS

HTTPS

Protocol

region (producer)

The region in which EKS client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id()

String

trustAllCertificates (producer)

If we want to trust all certificates in case of overriding the endpoint

false

boolean

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option

String

useDefaultCredentialsProvider (producer)

Set whether the KMS client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

accessKey (security)

Amazon AWS Access Key

String

secretKey (security)

Amazon AWS Secret Key

String

Required KMS component options

You have to provide the amazonKmsClient in the Registry or your accessKey and secretKey to access the Amazon KMS service.

Usage

Static credentials vs Default Credential Provider

You have the possibility of avoiding the usage of explicit static credentials, by specifying the useDefaultCredentialsProvider option and set it to true.

  • Java system properties - aws.accessKeyId and aws.secretKey

  • Environment variables - AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY.

  • Web Identity Token from AWS STS.

  • The shared credentials and config files.

  • Amazon ECS container credentials - loaded from the Amazon ECS if the environment variable AWS_CONTAINER_CREDENTIALS_RELATIVE_URI is set.

  • Amazon EC2 Instance profile credentials.

For more information about this you can look at AWS credentials documentation

Message headers evaluated by the KMS producer

Header Type Description

CamelAwsKMSLimit

Integer

The limit number of keys to return while performing a listKeys operation

CamelAwsKMSOperation

String

The operation we want to perform

CamelAwsKMSDescription

String

A key description to use while performing a createKey operation

CamelAwsKMSKeyId

String

The key Id

KMS Producer operations

Camel-AWS KMS component provides the following operation on the producer side:

  • listKeys

  • createKey

  • disableKey

  • scheduleKeyDeletion

  • describeKey

  • enableKey

Producer Examples

  • listKeys: this operation will list the available keys in KMS

from("direct:listKeys")
      .to("aws2-kms://test?kmsClient=#amazonKmsClient&operation=listKeys")

  • createKey: this operation will create a key in KMS

from("direct:createKey")
      .to("aws2-kms://test?kmsClient=#amazonKmsClient&operation=createKey")

  • disableKey: this operation will disable a key in KMS

from("direct:disableKey")
      .setHeader(KMS2Constants.KEY_ID, constant("123")
      .to("aws2-kms://test?kmsClient=#amazonKmsClient&operation=disableKey")

  • enableKey: this operation will enable a key in KMS

from("direct:enableKey")
      .setHeader(KMS2Constants.KEY_ID, constant("123")
      .to("aws2-kms://test?kmsClient=#amazonKmsClient&operation=enableKey")

Using a POJO as body

Sometimes build an AWS Request can be complex, because of multiple options. We introduce the possibility to use a POJO as body. In AWS KMS there are multiple operations you can submit, as an example for List keys request, you can do something like:

from("direct:createUser")
     .setBody(ListKeysRequest.builder().limit(10).build())
     .to("aws2-kms://test?kmsClient=#amazonKmsClient&operation=listKeys&pojoRequest=true")

In this way you’ll pass the request directly without the need of passing headers and options specifically related to this operation.

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws2-kms</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Spring Boot Auto-Configuration

When using aws2-kms with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws2-kms-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 17 options, which are listed below.

Name Description Default Type

camel.component.aws2-kms.access-key

Amazon AWS Access Key

String

camel.component.aws2-kms.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws2-kms.configuration

Component configuration. The option is a org.apache.camel.component.aws2.kms.KMS2Configuration type.

KMS2Configuration

camel.component.aws2-kms.enabled

Whether to enable auto configuration of the aws2-kms component. This is enabled by default.

Boolean

camel.component.aws2-kms.kms-client

To use a existing configured AWS KMS as client. The option is a software.amazon.awssdk.services.kms.KmsClient type.

KmsClient

camel.component.aws2-kms.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws2-kms.operation

The operation to perform

KMS2Operations

camel.component.aws2-kms.override-endpoint

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option

false

Boolean

camel.component.aws2-kms.pojo-request

If we want to use a POJO request as body or not

false

Boolean

camel.component.aws2-kms.proxy-host

To define a proxy host when instantiating the KMS client

String

camel.component.aws2-kms.proxy-port

To define a proxy port when instantiating the KMS client

Integer

camel.component.aws2-kms.proxy-protocol

To define a proxy protocol when instantiating the KMS client

Protocol

camel.component.aws2-kms.region

The region in which EKS client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id()

String

camel.component.aws2-kms.secret-key

Amazon AWS Secret Key

String

camel.component.aws2-kms.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint

false

Boolean

camel.component.aws2-kms.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option

String

camel.component.aws2-kms.use-default-credentials-provider

Set whether the KMS client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

Boolean
Back to top