Apache Camel helps you integrate over 300 different systems!

URI format

http:hostname[:port][/resourceUri][?options]

Will by default use port 80 for HTTP and 443 for HTTPS.

You can append query options to the URI in the following format, ?option=value&option=value&…

camel-http vs camel-jetty

You can only produce to endpoints generated by the HTTP component. Therefore it should never be used as input into your Camel Routes. To bind/expose an HTTP endpoint via a HTTP server as input to a Camel route, use the Jetty Component instead.

Http Component Options

The HTTP component supports 37 options, which are listed below.

Name	Description	Default	Type
cookieStore (producer)	To use a custom org.apache.http.client.CookieStore. By default the org.apache.http.impl.client.BasicCookieStore is used which is an in-memory only cookie store. Notice if bridgeEndpoint=true then the cookie store is forced to be a noop cookie store as cookie shouldn’t be stored as we are just bridging (eg acting as a proxy).		CookieStore
copyHeaders (producer)	If this option is true then IN exchange headers will be copied to OUT exchange headers according to copy strategy. Setting this to false, allows to only include the headers from the HTTP response (not propagating IN headers).	true	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
responsePayloadStreamingThreshold (producer)	This threshold in bytes controls whether the response payload should be stored in memory as a byte array or be streaming based. Set this to -1 to always use streaming mode.	8192	int
skipRequestHeaders (producer)	Whether to skip mapping all the Camel headers as HTTP request headers. If there are no data from Camel headers needed to be included in the HTTP request then this can avoid parsing overhead with many object allocations for the JVM garbage collector.	false	boolean
skipResponseHeaders (producer)	Whether to skip mapping all the HTTP response headers to Camel headers. If there are no data needed from HTTP headers then this can avoid parsing overhead with many object allocations for the JVM garbage collector.	false	boolean
allowJavaSerializedObject (advanced)	Whether to allow java serialization when a request uses context-type=application/x-java-serialized-object. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.	false	boolean
authCachingDisabled (advanced)	Disables authentication scheme caching	false	boolean
automaticRetriesDisabled (advanced)	Disables automatic request recovery and re-execution	false	boolean
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
clientConnectionManager (advanced)	To use a custom and shared HttpClientConnectionManager to manage connections. If this has been configured then this is always used for all endpoints created by this component.		HttpClientConnectionManager
connectionsPerRoute (advanced)	The maximum number of connections per route.	20	int
connectionStateDisabled (advanced)	Disables connection state tracking	false	boolean
connectionTimeToLive (advanced)	The time for connection to live, the time unit is millisecond, the default value is always keep alive.		long
contentCompressionDisabled (advanced)	Disables automatic content decompression	false	boolean
cookieManagementDisabled (advanced)	Disables state (cookie) management	false	boolean
defaultUserAgentDisabled (advanced)	Disables the default user agent set by this builder if none has been provided by the user	false	boolean
httpBinding (advanced)	To use a custom HttpBinding to control the mapping between Camel message and HttpClient.		HttpBinding
httpClientConfigurer (advanced)	To use the custom HttpClientConfigurer to perform configuration of the HttpClient that will be used.		HttpClientConfigurer
httpConfiguration (advanced)	To use the shared HttpConfiguration as base configuration.		HttpConfiguration
httpContext (advanced)	To use a custom org.apache.http.protocol.HttpContext when executing requests.		HttpContext
maxTotalConnections (advanced)	The maximum number of connections.	200	int
redirectHandlingDisabled (advanced)	Disables automatic redirect handling	false	boolean
headerFilterStrategy (filter)	To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message.		HeaderFilterStrategy
proxyAuthDomain (proxy)	Proxy authentication domain to use		String
proxyAuthHost (proxy)	Proxy authentication host		String
proxyAuthMethod (proxy)	Proxy authentication method to use. There are 3 enums and the value can be one of: Basic, Digest, NTLM		String
proxyAuthNtHost (proxy)	Proxy authentication domain (workstation name) to use with NTML		String
proxyAuthPassword (proxy)	Proxy authentication password		String
proxyAuthPort (proxy)	Proxy authentication port		Integer
proxyAuthUsername (proxy)	Proxy authentication username		String
sslContextParameters (security)	To configure security using SSLContextParameters. Important: Only one instance of org.apache.camel.support.jsse.SSLContextParameters is supported per HttpComponent. If you need to use 2 or more different instances, you need to define a new HttpComponent per instance you need.		SSLContextParameters
useGlobalSslContextParameters (security)	Enable usage of global SSL context parameters.	false	boolean
x509HostnameVerifier (security)	To use a custom X509HostnameVerifier such as DefaultHostnameVerifier or NoopHostnameVerifier.		HostnameVerifier
connectionRequestTimeout (timeout)	The timeout in milliseconds used when requesting a connection from the connection manager. A timeout value of zero is interpreted as an infinite timeout. A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default).	-1	int
connectTimeout (timeout)	Determines the timeout in milliseconds until a connection is established. A timeout value of zero is interpreted as an infinite timeout. A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default).	-1	int
socketTimeout (timeout)	Defines the socket timeout in milliseconds, which is the timeout for waiting for data or, put differently, a maximum period inactivity between two consecutive data packets). A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default).	-1	int

Name

Description

Default

Type

cookieStore (producer)

To use a custom org.apache.http.client.CookieStore. By default the org.apache.http.impl.client.BasicCookieStore is used which is an in-memory only cookie store. Notice if bridgeEndpoint=true then the cookie store is forced to be a noop cookie store as cookie shouldn’t be stored as we are just bridging (eg acting as a proxy).

CookieStore

copyHeaders (producer)

If this option is true then IN exchange headers will be copied to OUT exchange headers according to copy strategy. Setting this to false, allows to only include the headers from the HTTP response (not propagating IN headers).

true

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

responsePayloadStreamingThreshold (producer)

This threshold in bytes controls whether the response payload should be stored in memory as a byte array or be streaming based. Set this to -1 to always use streaming mode.

8192

int

skipRequestHeaders (producer)

Whether to skip mapping all the Camel headers as HTTP request headers. If there are no data from Camel headers needed to be included in the HTTP request then this can avoid parsing overhead with many object allocations for the JVM garbage collector.

false

boolean

skipResponseHeaders (producer)

Whether to skip mapping all the HTTP response headers to Camel headers. If there are no data needed from HTTP headers then this can avoid parsing overhead with many object allocations for the JVM garbage collector.

false

boolean

allowJavaSerializedObject (advanced)

Whether to allow java serialization when a request uses context-type=application/x-java-serialized-object. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.

false

boolean

authCachingDisabled (advanced)

Disables authentication scheme caching

false

boolean

automaticRetriesDisabled (advanced)

Disables automatic request recovery and re-execution

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

clientConnectionManager (advanced)

To use a custom and shared HttpClientConnectionManager to manage connections. If this has been configured then this is always used for all endpoints created by this component.

HttpClientConnectionManager

connectionsPerRoute (advanced)

The maximum number of connections per route.

20

int

connectionStateDisabled (advanced)

Disables connection state tracking

false

boolean

connectionTimeToLive (advanced)

The time for connection to live, the time unit is millisecond, the default value is always keep alive.

long

contentCompressionDisabled (advanced)

Disables automatic content decompression

false

boolean

cookieManagementDisabled (advanced)

Disables state (cookie) management

false

boolean

defaultUserAgentDisabled (advanced)

Disables the default user agent set by this builder if none has been provided by the user

false

boolean

httpBinding (advanced)

To use a custom HttpBinding to control the mapping between Camel message and HttpClient.

HttpBinding

httpClientConfigurer (advanced)

To use the custom HttpClientConfigurer to perform configuration of the HttpClient that will be used.

HttpClientConfigurer

httpConfiguration (advanced)

To use the shared HttpConfiguration as base configuration.

HttpConfiguration

httpContext (advanced)

To use a custom org.apache.http.protocol.HttpContext when executing requests.

HttpContext

maxTotalConnections (advanced)

The maximum number of connections.

200

int

redirectHandlingDisabled (advanced)

Disables automatic redirect handling

false

boolean

headerFilterStrategy (filter)

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message.

HeaderFilterStrategy

proxyAuthDomain (proxy)

Proxy authentication domain to use

String

proxyAuthHost (proxy)

Proxy authentication host

String

proxyAuthMethod (proxy)

Proxy authentication method to use. There are 3 enums and the value can be one of: Basic, Digest, NTLM

String

proxyAuthNtHost (proxy)

Proxy authentication domain (workstation name) to use with NTML

String

proxyAuthPassword (proxy)

Proxy authentication password

String

proxyAuthPort (proxy)

Proxy authentication port

Integer

proxyAuthUsername (proxy)

Proxy authentication username

String

sslContextParameters (security)

To configure security using SSLContextParameters. Important: Only one instance of org.apache.camel.support.jsse.SSLContextParameters is supported per HttpComponent. If you need to use 2 or more different instances, you need to define a new HttpComponent per instance you need.

SSLContextParameters

useGlobalSslContextParameters (security)

Enable usage of global SSL context parameters.

false

boolean

x509HostnameVerifier (security)

To use a custom X509HostnameVerifier such as DefaultHostnameVerifier or NoopHostnameVerifier.

HostnameVerifier

connectionRequestTimeout (timeout)

The timeout in milliseconds used when requesting a connection from the connection manager. A timeout value of zero is interpreted as an infinite timeout. A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default).

-1

int

connectTimeout (timeout)

Determines the timeout in milliseconds until a connection is established. A timeout value of zero is interpreted as an infinite timeout. A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default).

-1

int

socketTimeout (timeout)

Defines the socket timeout in milliseconds, which is the timeout for waiting for data or, put differently, a maximum period inactivity between two consecutive data packets). A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default).

-1

int

The HTTP endpoint is configured using URI syntax:

http://httpUri

with the following path and query parameters:

Path Parameters (1 parameters):

Name	Description	Default	Type
httpUri	Required The url of the HTTP endpoint to call.		URI

Name

Description

Default

Type

httpUri

Required The url of the HTTP endpoint to call.

URI

Query Parameters (50 parameters):

Name	Description	Default	Type
disableStreamCache (common)	Determines whether or not the raw input stream from Servlet is cached or not (Camel will read the stream into a in memory/overflow to file, Stream caching) cache. By default Camel will cache the Servlet input stream to support reading it multiple times to ensure it Camel can retrieve all data from the stream. However you can set this option to true when you for example need to access the raw stream, such as streaming it directly to a file or other persistent store. DefaultHttpBinding will copy the request input stream into a stream cache and put it into message body if this option is false to support reading the stream multiple times. If you use Servlet to bridge/proxy an endpoint then consider enabling this option to improve performance, in case you do not need to read the message payload multiple times. The http producer will by default cache the response body stream. If setting this option to true, then the producers will not cache the response body stream but use the response stream as-is as the message body.	false	boolean
headerFilterStrategy (common)	To use a custom HeaderFilterStrategy to filter header to and from Camel message.		HeaderFilterStrategy
httpBinding (common)	To use a custom HttpBinding to control the mapping between Camel message and HttpClient.		HttpBinding
bridgeEndpoint (producer)	If the option is true, HttpProducer will ignore the Exchange.HTTP_URI header, and use the endpoint’s URI for request. You may also set the option throwExceptionOnFailure to be false to let the HttpProducer send all the fault response back.	false	boolean
chunked (producer)	If this option is false the Servlet will disable the HTTP streaming and set the content-length header on the response	true	boolean
clearExpiredCookies (producer)	Whether to clear expired cookies before sending the HTTP request. This ensures the cookies store does not keep growing by adding new cookies which is newer removed when they are expired. If the component has disabled cookie management then this option is disabled too.	true	boolean
connectionClose (producer)	Specifies whether a Connection Close header must be added to HTTP Request. By default connectionClose is false.	false	boolean
copyHeaders (producer)	If this option is true then IN exchange headers will be copied to OUT exchange headers according to copy strategy. Setting this to false, allows to only include the headers from the HTTP response (not propagating IN headers).	true	boolean
customHostHeader (producer)	To use custom host header for producer. When not set in query will be ignored. When set will override host header derived from url.		String
httpMethod (producer)	Configure the HTTP method to use. The HttpMethod header cannot override this option if set. There are 8 enums and the value can be one of: GET, POST, PUT, DELETE, HEAD, OPTIONS, TRACE, PATCH		HttpMethods
ignoreResponseBody (producer)	If this option is true, The http producer won’t read response body and cache the input stream	false	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
preserveHostHeader (producer)	If the option is true, HttpProducer will set the Host header to the value contained in the current exchange Host header, useful in reverse proxy applications where you want the Host header received by the downstream server to reflect the URL called by the upstream client, this allows applications which use the Host header to generate accurate URL’s for a proxied service	false	boolean
throwExceptionOnFailure (producer)	Option to disable throwing the HttpOperationFailedException in case of failed responses from the remote server. This allows you to get all responses regardless of the HTTP status code.	true	boolean
transferException (producer)	If enabled and an Exchange failed processing on the consumer side, and if the caused Exception was send back serialized in the response as a application/x-java-serialized-object content type. On the producer side the exception will be deserialized and thrown as is, instead of the HttpOperationFailedException. The caused exception is required to be serialized. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.	false	boolean
cookieHandler (producer)	Configure a cookie handler to maintain a HTTP session		CookieHandler
cookieStore (producer)	To use a custom CookieStore. By default the BasicCookieStore is used which is an in-memory only cookie store. Notice if bridgeEndpoint=true then the cookie store is forced to be a noop cookie store as cookie shouldn’t be stored as we are just bridging (eg acting as a proxy). If a cookieHandler is set then the cookie store is also forced to be a noop cookie store as cookie handling is then performed by the cookieHandler.		CookieStore
deleteWithBody (producer)	Whether the HTTP DELETE should include the message body or not. By default HTTP DELETE do not include any HTTP body. However in some rare cases users may need to be able to include the message body.	false	boolean
getWithBody (producer)	Whether the HTTP GET should include the message body or not. By default HTTP GET do not include any HTTP body. However in some rare cases users may need to be able to include the message body.	false	boolean
okStatusCodeRange (producer)	The status codes which are considered a success response. The values are inclusive. Multiple ranges can be defined, separated by comma, e.g. 200-204,209,301-304. Each range must be a single number or from-to with the dash included.	200-299	String
skipRequestHeaders (producer)	Whether to skip mapping all the Camel headers as HTTP request headers. If there are no data from Camel headers needed to be included in the HTTP request then this can avoid parsing overhead with many object allocations for the JVM garbage collector.	false	boolean
skipResponseHeaders (producer)	Whether to skip mapping all the HTTP response headers to Camel headers. If there are no data needed from HTTP headers then this can avoid parsing overhead with many object allocations for the JVM garbage collector.	false	boolean
clientBuilder (advanced)	Provide access to the http client request parameters used on new RequestConfig instances used by producers or consumers of this endpoint.		HttpClientBuilder
clientConnectionManager (advanced)	To use a custom HttpClientConnectionManager to manage connections		HttpClientConnectionManager
connectionsPerRoute (advanced)	The maximum number of connections per route.	20	int
httpClient (advanced)	Sets a custom HttpClient to be used by the producer		HttpClient
httpClientConfigurer (advanced)	Register a custom configuration strategy for new HttpClient instances created by producers or consumers such as to configure authentication mechanisms etc.		HttpClientConfigurer
httpClientOptions (advanced)	To configure the HttpClient using the key/values from the Map.		Map
httpContext (advanced)	To use a custom HttpContext instance		HttpContext
maxTotalConnections (advanced)	The maximum number of connections.	200	int
useSystemProperties (advanced)	To use System Properties as fallback for configuration	false	boolean
proxyAuthDomain (proxy)	Proxy authentication domain to use with NTML		String
proxyAuthHost (proxy)	Proxy authentication host		String
proxyAuthMethod (proxy)	Proxy authentication method to use. There are 3 enums and the value can be one of: Basic, Digest, NTLM		String
proxyAuthNtHost (proxy)	Proxy authentication domain (workstation name) to use with NTML		String
proxyAuthPassword (proxy)	Proxy authentication password		String
proxyAuthPort (proxy)	Proxy authentication port		int
proxyAuthScheme (proxy)	Proxy authentication scheme to use. There are 2 enums and the value can be one of: http, https		String
proxyAuthUsername (proxy)	Proxy authentication username		String
proxyHost (proxy)	Proxy hostname to use		String
proxyPort (proxy)	Proxy port to use		int
authDomain (security)	Authentication domain to use with NTML		String
authenticationPreemptive (security)	If this option is true, camel-http sends preemptive basic authentication to the server.	false	boolean
authHost (security)	Authentication host to use with NTML		String
authMethod (security)	Authentication methods allowed to use as a comma separated list of values Basic, Digest or NTLM.		String
authMethodPriority (security)	Which authentication method to prioritize to use, either as Basic, Digest or NTLM. There are 3 enums and the value can be one of: Basic, Digest, NTLM		String
authPassword (security)	Authentication password		String
authUsername (security)	Authentication username		String
sslContextParameters (security)	To configure security using SSLContextParameters. Important: Only one instance of org.apache.camel.util.jsse.SSLContextParameters is supported per HttpComponent. If you need to use 2 or more different instances, you need to define a new HttpComponent per instance you need.		SSLContextParameters
x509HostnameVerifier (security)	To use a custom X509HostnameVerifier such as DefaultHostnameVerifier or NoopHostnameVerifier		HostnameVerifier

Name

Description

Default

Type

disableStreamCache (common)

Determines whether or not the raw input stream from Servlet is cached or not (Camel will read the stream into a in memory/overflow to file, Stream caching) cache. By default Camel will cache the Servlet input stream to support reading it multiple times to ensure it Camel can retrieve all data from the stream. However you can set this option to true when you for example need to access the raw stream, such as streaming it directly to a file or other persistent store. DefaultHttpBinding will copy the request input stream into a stream cache and put it into message body if this option is false to support reading the stream multiple times. If you use Servlet to bridge/proxy an endpoint then consider enabling this option to improve performance, in case you do not need to read the message payload multiple times. The http producer will by default cache the response body stream. If setting this option to true, then the producers will not cache the response body stream but use the response stream as-is as the message body.

false

boolean

headerFilterStrategy (common)

To use a custom HeaderFilterStrategy to filter header to and from Camel message.

HeaderFilterStrategy

httpBinding (common)

To use a custom HttpBinding to control the mapping between Camel message and HttpClient.

HttpBinding

bridgeEndpoint (producer)

If the option is true, HttpProducer will ignore the Exchange.HTTP_URI header, and use the endpoint’s URI for request. You may also set the option throwExceptionOnFailure to be false to let the HttpProducer send all the fault response back.

false

boolean

chunked (producer)

If this option is false the Servlet will disable the HTTP streaming and set the content-length header on the response

true

boolean

clearExpiredCookies (producer)

Whether to clear expired cookies before sending the HTTP request. This ensures the cookies store does not keep growing by adding new cookies which is newer removed when they are expired. If the component has disabled cookie management then this option is disabled too.

true

boolean

connectionClose (producer)

Specifies whether a Connection Close header must be added to HTTP Request. By default connectionClose is false.

false

boolean

copyHeaders (producer)

If this option is true then IN exchange headers will be copied to OUT exchange headers according to copy strategy. Setting this to false, allows to only include the headers from the HTTP response (not propagating IN headers).

true

boolean

customHostHeader (producer)

To use custom host header for producer. When not set in query will be ignored. When set will override host header derived from url.

String

httpMethod (producer)

Configure the HTTP method to use. The HttpMethod header cannot override this option if set. There are 8 enums and the value can be one of: GET, POST, PUT, DELETE, HEAD, OPTIONS, TRACE, PATCH

HttpMethods

ignoreResponseBody (producer)

If this option is true, The http producer won’t read response body and cache the input stream

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

preserveHostHeader (producer)

If the option is true, HttpProducer will set the Host header to the value contained in the current exchange Host header, useful in reverse proxy applications where you want the Host header received by the downstream server to reflect the URL called by the upstream client, this allows applications which use the Host header to generate accurate URL’s for a proxied service

false

boolean

throwExceptionOnFailure (producer)

Option to disable throwing the HttpOperationFailedException in case of failed responses from the remote server. This allows you to get all responses regardless of the HTTP status code.

true

boolean

transferException (producer)

If enabled and an Exchange failed processing on the consumer side, and if the caused Exception was send back serialized in the response as a application/x-java-serialized-object content type. On the producer side the exception will be deserialized and thrown as is, instead of the HttpOperationFailedException. The caused exception is required to be serialized. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.

false

boolean

cookieHandler (producer)

Configure a cookie handler to maintain a HTTP session

CookieHandler

cookieStore (producer)

To use a custom CookieStore. By default the BasicCookieStore is used which is an in-memory only cookie store. Notice if bridgeEndpoint=true then the cookie store is forced to be a noop cookie store as cookie shouldn’t be stored as we are just bridging (eg acting as a proxy). If a cookieHandler is set then the cookie store is also forced to be a noop cookie store as cookie handling is then performed by the cookieHandler.

CookieStore

deleteWithBody (producer)

Whether the HTTP DELETE should include the message body or not. By default HTTP DELETE do not include any HTTP body. However in some rare cases users may need to be able to include the message body.

false

boolean

getWithBody (producer)

Whether the HTTP GET should include the message body or not. By default HTTP GET do not include any HTTP body. However in some rare cases users may need to be able to include the message body.

false

boolean

okStatusCodeRange (producer)

The status codes which are considered a success response. The values are inclusive. Multiple ranges can be defined, separated by comma, e.g. 200-204,209,301-304. Each range must be a single number or from-to with the dash included.

200-299

String

skipRequestHeaders (producer)

Whether to skip mapping all the Camel headers as HTTP request headers. If there are no data from Camel headers needed to be included in the HTTP request then this can avoid parsing overhead with many object allocations for the JVM garbage collector.

false

boolean

skipResponseHeaders (producer)

Whether to skip mapping all the HTTP response headers to Camel headers. If there are no data needed from HTTP headers then this can avoid parsing overhead with many object allocations for the JVM garbage collector.

false

boolean

clientBuilder (advanced)

Provide access to the http client request parameters used on new RequestConfig instances used by producers or consumers of this endpoint.

HttpClientBuilder

clientConnectionManager (advanced)

To use a custom HttpClientConnectionManager to manage connections

HttpClientConnectionManager

connectionsPerRoute (advanced)

The maximum number of connections per route.

20

int

httpClient (advanced)

Sets a custom HttpClient to be used by the producer

HttpClient

httpClientConfigurer (advanced)

Register a custom configuration strategy for new HttpClient instances created by producers or consumers such as to configure authentication mechanisms etc.

HttpClientConfigurer

httpClientOptions (advanced)

To configure the HttpClient using the key/values from the Map.

Map

httpContext (advanced)

To use a custom HttpContext instance

HttpContext

maxTotalConnections (advanced)

The maximum number of connections.

200

int

useSystemProperties (advanced)

To use System Properties as fallback for configuration

false

boolean

proxyAuthDomain (proxy)

Proxy authentication domain to use with NTML

String

proxyAuthHost (proxy)

Proxy authentication host

String

proxyAuthMethod (proxy)

Proxy authentication method to use. There are 3 enums and the value can be one of: Basic, Digest, NTLM

String

proxyAuthNtHost (proxy)

Proxy authentication domain (workstation name) to use with NTML

String

proxyAuthPassword (proxy)

Proxy authentication password

String

proxyAuthPort (proxy)

Proxy authentication port

int

proxyAuthScheme (proxy)

Proxy authentication scheme to use. There are 2 enums and the value can be one of: http, https

String

proxyAuthUsername (proxy)

Proxy authentication username

String

proxyHost (proxy)

Proxy hostname to use

String

proxyPort (proxy)

Proxy port to use

int

authDomain (security)

Authentication domain to use with NTML

String

authenticationPreemptive (security)

If this option is true, camel-http sends preemptive basic authentication to the server.

false

boolean

authHost (security)

Authentication host to use with NTML

String

authMethod (security)

Authentication methods allowed to use as a comma separated list of values Basic, Digest or NTLM.

String

authMethodPriority (security)

Which authentication method to prioritize to use, either as Basic, Digest or NTLM. There are 3 enums and the value can be one of: Basic, Digest, NTLM

String

authPassword (security)

Authentication password

String

authUsername (security)

Authentication username

String

sslContextParameters (security)

To configure security using SSLContextParameters. Important: Only one instance of org.apache.camel.util.jsse.SSLContextParameters is supported per HttpComponent. If you need to use 2 or more different instances, you need to define a new HttpComponent per instance you need.

SSLContextParameters

x509HostnameVerifier (security)

To use a custom X509HostnameVerifier such as DefaultHostnameVerifier or NoopHostnameVerifier

HostnameVerifier

Message Headers

Name Type Description

Name	Type	Description
`Exchange.HTTP_URI`	`String`	URI to call. Will override existing URI set directly on the endpoint. This uri is the uri of the http server to call. Its not the same as the Camel endpoint uri, where you can configure endpoint options such as security etc. This header does not support that, its only the uri of the http server.
`Exchange.HTTP_PATH`	`String`	Request URI’s path, the header will be used to build the request URI with the HTTP_URI.
`Exchange.HTTP_QUERY`	`String`	URI parameters. Will override existing URI parameters set directly on the endpoint.
`Exchange.HTTP_RESPONSE_CODE`	`int`	The HTTP response code from the external server. Is 200 for OK.
`Exchange.HTTP_RESPONSE_TEXT`	`String`	The HTTP response text from the external server.
`Exchange.HTTP_CHARACTER_ENCODING`	`String`	Character encoding.
`Exchange.CONTENT_TYPE`	`String`	The HTTP content type. Is set on both the IN and OUT message to provide a content type, such as `text/html`.
`Exchange.CONTENT_ENCODING`	`String`	The HTTP content encoding. Is set on both the IN and OUT message to provide a content encoding, such as `gzip`.

Exchange.HTTP_URI

String

URI to call. Will override existing URI set directly on the endpoint. This uri is the uri of the http server to call. Its not the same as the Camel endpoint uri, where you can configure endpoint options such as security etc. This header does not support that, its only the uri of the http server.

Exchange.HTTP_PATH

String

Request URI’s path, the header will be used to build the request URI with the HTTP_URI.

Exchange.HTTP_QUERY

String

URI parameters. Will override existing URI parameters set directly on the endpoint.

Exchange.HTTP_RESPONSE_CODE

int

The HTTP response code from the external server. Is 200 for OK.

Exchange.HTTP_RESPONSE_TEXT

String

The HTTP response text from the external server.

Exchange.HTTP_CHARACTER_ENCODING

String

Character encoding.

Exchange.CONTENT_TYPE

String

The HTTP content type. Is set on both the IN and OUT message to provide a content type, such as text/html.

Exchange.CONTENT_ENCODING

String

The HTTP content encoding. Is set on both the IN and OUT message to provide a content encoding, such as gzip.

Message Body

Camel will store the HTTP response from the external server on the OUT body. All headers from the IN message will be copied to the OUT message, so headers are preserved during routing. Additionally Camel will add the HTTP response headers as well to the OUT message headers.

Using System Properties

When setting useSystemProperties to true, the HTTP Client will look for the following System Properties and it will use it:

ssl.TrustManagerFactory.algorithm
javax.net.ssl.trustStoreType
javax.net.ssl.trustStore
javax.net.ssl.trustStoreProvider
javax.net.ssl.trustStorePassword
java.home
ssl.KeyManagerFactory.algorithm
javax.net.ssl.keyStoreType
javax.net.ssl.keyStore
javax.net.ssl.keyStoreProvider
javax.net.ssl.keyStorePassword
http.proxyHost
http.proxyPort
http.nonProxyHosts
http.keepAlive
http.maxConnections

Response code

Camel will handle according to the HTTP response code:

Response code is in the range 100..299, Camel regards it as a success response.
Response code is in the range 300..399, Camel regards it as a redirection response and will throw a HttpOperationFailedException with the information.
Response code is 400+, Camel regards it as an external server failure and will throw a HttpOperationFailedException with the information.

throwExceptionOnFailure The option, throwExceptionOnFailure, can be set to false to prevent the HttpOperationFailedException from being thrown for failed response codes. This allows you to get any response from the remote server.
There is a sample below demonstrating this.

Exceptions

HttpOperationFailedException exception contains the following information:

The HTTP status code
The HTTP status line (text of the status code)
Redirect location, if server returned a redirect
Response body as a java.lang.String, if server provided a body as response

Which HTTP method will be used

The following algorithm is used to determine what HTTP method should be used:
1. Use method provided as endpoint configuration (httpMethod).
2. Use method provided in header (Exchange.HTTP_METHOD).
3. GET if query string is provided in header.
4. GET if endpoint is configured with a query string.
5. POST if there is data to send (body is not null).
6. GET otherwise.

How to get access to HttpServletRequest and HttpServletResponse

You can get access to these two using the Camel type converter system using

You can get the request and response not just from the processor after the camel-jetty or camel-cxf endpoint.

HttpServletRequest request = exchange.getIn().getBody(HttpServletRequest.class);
HttpServletRequest response = exchange.getIn().getBody(HttpServletResponse.class);

Configuring URI to call

You can set the HTTP producer’s URI directly form the endpoint URI. In the route below, Camel will call out to the external server, oldhost, using HTTP.

from("direct:start")
        .to("http://oldhost");

And the equivalent Spring sample:

<camelContext xmlns="http://activemq.apache.org/camel/schema/spring">
  <route>
    <from uri="direct:start"/>
    <to uri="http://oldhost"/>
  </route>
</camelContext>

You can override the HTTP endpoint URI by adding a header with the key, Exchange.HTTP_URI, on the message.

from("direct:start")
  .setHeader(Exchange.HTTP_URI, constant("http://newhost"))
  .to("http://oldhost");

In the sample above Camel will call the http://newhost despite the endpoint is configured with http://oldhost.
If the http endpoint is working in bridge mode, it will ignore the message header of Exchange.HTTP_URI.

Configuring URI Parameters

The http producer supports URI parameters to be sent to the HTTP server. The URI parameters can either be set directly on the endpoint URI or as a header with the key Exchange.HTTP_QUERY on the message.

from("direct:start")
  .to("http://oldhost?order=123&detail=short");

Or options provided in a header:

from("direct:start")
  .setHeader(Exchange.HTTP_QUERY, constant("order=123&detail=short"))
  .to("http://oldhost");

How to set the http method (GET/PATCH/POST/PUT/DELETE/HEAD/OPTIONS/TRACE) to the HTTP producer

The HTTP component provides a way to set the HTTP request method by setting the message header. Here is an example:

from("direct:start")
  .setHeader(Exchange.HTTP_METHOD, constant(org.apache.camel.component.http.HttpMethods.POST))
  .to("http://www.google.com")
  .to("mock:results");

The method can be written a bit shorter using the string constants:

.setHeader("CamelHttpMethod", constant("POST"))

And the equivalent Spring sample:

<camelContext xmlns="http://activemq.apache.org/camel/schema/spring">
  <route>
    <from uri="direct:start"/>
    <setHeader name="CamelHttpMethod">
        <constant>POST</constant>
    </setHeader>
    <to uri="http://www.google.com"/>
    <to uri="mock:results"/>
  </route>
</camelContext>

Using client timeout - SO_TIMEOUT

See the HttpSOTimeoutTest unit test.

Configuring a Proxy

The HTTP component provides a way to configure a proxy.

from("direct:start")
  .to("http://oldhost?proxyAuthHost=www.myproxy.com&proxyAuthPort=80");

There is also support for proxy authentication via the proxyAuthUsername and proxyAuthPassword options.

Using proxy settings outside of URI

To avoid System properties conflicts, you can set proxy configuration only from the CamelContext or URI.
Java DSL :

 context.getGlobalOptions().put("http.proxyHost", "172.168.18.9");
 context.getGlobalOptions().put("http.proxyPort", "8080");

Spring XML

   <camelContext>
       <properties>
           <property key="http.proxyHost" value="172.168.18.9"/>
           <property key="http.proxyPort" value="8080"/>
      </properties>
   </camelContext>

Camel will first set the settings from Java System or CamelContext Properties and then the endpoint proxy options if provided.
So you can override the system properties with the endpoint options.

There is also a http.proxyScheme property you can set to explicit configure the scheme to use.

Configuring charset

If you are using POST to send data you can configure the charset using the Exchange property:

exchange.setProperty(Exchange.CHARSET_NAME, "ISO-8859-1");

Sample with scheduled poll

This sample polls the Google homepage every 10 seconds and write the page to the file message.html:

from("timer://foo?fixedRate=true&delay=0&period=10000")
  .to("http://www.google.com")
  .setHeader(FileComponent.HEADER_FILE_NAME, "message.html")
  .to("file:target/google");

URI Parameters from the endpoint URI

In this sample we have the complete URI endpoint that is just what you would have typed in a web browser. Multiple URI parameters can of course be set using the & character as separator, just as you would in the web browser. Camel does no tricks here.

// we query for Camel at the Google page
template.sendBody("http://www.google.com/search?q=Camel", null);

URI Parameters from the Message

Map headers = new HashMap();
headers.put(Exchange.HTTP_QUERY, "q=Camel&lr=lang_en");
// we query for Camel and English language at Google
template.sendBody("http://www.google.com/search", null, headers);

In the header value above notice that it should not be prefixed with ? and you can separate parameters as usual with the & char.

Getting the Response Code

You can get the HTTP response code from the HTTP component by getting the value from the Out message header with Exchange.HTTP_RESPONSE_CODE.

Exchange exchange = template.send("http://www.google.com/search", new Processor() {
  public void process(Exchange exchange) throws Exception {
    exchange.getIn().setHeader(Exchange.HTTP_QUERY, constant("hl=en&q=activemq"));
  }
});
Message out = exchange.getOut();
int responseCode = out.getHeader(Exchange.HTTP_RESPONSE_CODE, Integer.class);

Disabling Cookies

To disable cookies you can set the HTTP Client to ignore cookies by adding this URI option:
httpClient.cookieSpec=ignoreCookies

Basic auth with the streaming message body

In order to avoid the NonRepeatableRequestException, you need to do the Preemptive Basic Authentication by adding the option:
authenticationPreemptive=true

Advanced Usage

If you need more control over the HTTP producer you should use the HttpComponent where you can set various classes to give you custom behavior.

Setting up SSL for HTTP Client

Using the JSSE Configuration Utility

The HTTP component supports SSL/TLS configuration through the Camel JSSE Configuration Utility. This utility greatly decreases the amount of component specific code you need to write and is configurable at the endpoint and component levels. The following examples demonstrate how to use the utility with the HTTP component.

Programmatic configuration of the component

KeyStoreParameters ksp = new KeyStoreParameters();
ksp.setResource("/users/home/server/keystore.jks");
ksp.setPassword("keystorePassword");

KeyManagersParameters kmp = new KeyManagersParameters();
kmp.setKeyStore(ksp);
kmp.setKeyPassword("keyPassword");

SSLContextParameters scp = new SSLContextParameters();
scp.setKeyManagers(kmp);

HttpComponent httpComponent = getContext().getComponent("https", HttpComponent.class);
httpComponent.setSslContextParameters(scp);

Spring DSL based configuration of endpoint

...
  <camel:sslContextParameters
      id="sslContextParameters">
    <camel:keyManagers
        keyPassword="keyPassword">
      <camel:keyStore
          resource="/users/home/server/keystore.jks"
          password="keystorePassword"/>
    </camel:keyManagers>
  </camel:sslContextParameters>...
...
  <to uri="https://127.0.0.1/mail/?sslContextParameters=#sslContextParameters"/>...

Configuring Apache HTTP Client Directly

Basically camel-http component is built on the top of Apache HttpClient. Please refer to SSL/TLS customization for details or have a look into the org.apache.camel.component.http.HttpsServerTestSupport unit test base class.
You can also implement a custom org.apache.camel.component.http.HttpClientConfigurer to do some configuration on the http client if you need full control of it.

However if you just want to specify the keystore and truststore you can do this with Apache HTTP HttpClientConfigurer, for example:

KeyStore keystore = ...;
KeyStore truststore = ...;

SchemeRegistry registry = new SchemeRegistry();
registry.register(new Scheme("https", 443, new SSLSocketFactory(keystore, "mypassword", truststore)));

And then you need to create a class that implements HttpClientConfigurer, and registers https protocol providing a keystore or truststore per example above. Then, from your camel route builder class you can hook it up like so:

HttpComponent httpComponent = getContext().getComponent("http", HttpComponent.class);
httpComponent.setHttpClientConfigurer(new MyHttpClientConfigurer());

If you are doing this using the Spring DSL, you can specify your HttpClientConfigurer using the URI. For example:

<bean id="myHttpClientConfigurer"
 class="my.https.HttpClientConfigurer">
</bean>

<to uri="https://myhostname.com:443/myURL?httpClientConfigurer=myHttpClientConfigurer"/>

As long as you implement the HttpClientConfigurer and configure your keystore and truststore as described above, it will work fine.

Using HTTPS to authenticate gotchas

An end user reported that he had problem with authenticating with HTTPS. The problem was eventually resolved by providing a custom configured org.apache.http.protocol.HttpContext:

1. Create a (Spring) factory for HttpContexts:

public class HttpContextFactory {

  private String httpHost = "localhost";
  private String httpPort = 9001;

  private BasicHttpContext httpContext = new BasicHttpContext();
  private BasicAuthCache authCache = new BasicAuthCache();
  private BasicScheme basicAuth = new BasicScheme();

  public HttpContext getObject() {
    authCache.put(new HttpHost(httpHost, httpPort), basicAuth);

    httpContext.setAttribute(ClientContext.AUTH_CACHE, authCache);

    return httpContext;
  }

  // getter and setter
}

2. Declare an HttpContext in the Spring application context file:

<bean id="myHttpContext" factory-bean="httpContextFactory" factory-method="getObject"/>

3. Reference the context in the http URL:

<to uri="https://myhostname.com:443/myURL?httpContext=myHttpContext"/>

Using different SSLContextParameters

The HTTP component only support one instance of org.apache.camel.support.jsse.SSLContextParameters per component. If you need to use 2 or more different instances, then you need to setup multiple HTTP components as shown below. Where we have 2 components, each using their own instance of sslContextParameters property.

<bean id="http-foo" class="org.apache.camel.component.http.HttpComponent">
   <property name="sslContextParameters" ref="sslContextParams1"/>
   <property name="x509HostnameVerifier" ref="hostnameVerifier"/>
</bean>

<bean id="http-bar" class="org.apache.camel.component.http.HttpComponent">
   <property name="sslContextParameters" ref="sslContextParams2"/>
   <property name="x509HostnameVerifier" ref="hostnameVerifier"/>
</bean>

Spring Boot Auto-Configuration

When using http with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-http-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 38 options, which are listed below.

Name	Description	Default	Type
camel.component.http.allow-java-serialized-object	Whether to allow java serialization when a request uses context-type=application/x-java-serialized-object. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.	false	Boolean
camel.component.http.auth-caching-disabled	Disables authentication scheme caching	false	Boolean
camel.component.http.automatic-retries-disabled	Disables automatic request recovery and re-execution	false	Boolean
camel.component.http.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.http.client-connection-manager	To use a custom and shared HttpClientConnectionManager to manage connections. If this has been configured then this is always used for all endpoints created by this component. The option is a org.apache.http.conn.HttpClientConnectionManager type.		HttpClientConnectionManager
camel.component.http.connect-timeout	Determines the timeout in milliseconds until a connection is established. A timeout value of zero is interpreted as an infinite timeout. A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default).	-1	Integer
camel.component.http.connection-request-timeout	The timeout in milliseconds used when requesting a connection from the connection manager. A timeout value of zero is interpreted as an infinite timeout. A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default).	-1	Integer
camel.component.http.connection-state-disabled	Disables connection state tracking	false	Boolean
camel.component.http.connection-time-to-live	The time for connection to live, the time unit is millisecond, the default value is always keep alive.		Long
camel.component.http.connections-per-route	The maximum number of connections per route.	20	Integer
camel.component.http.content-compression-disabled	Disables automatic content decompression	false	Boolean
camel.component.http.cookie-management-disabled	Disables state (cookie) management	false	Boolean
camel.component.http.cookie-store	To use a custom org.apache.http.client.CookieStore. By default the org.apache.http.impl.client.BasicCookieStore is used which is an in-memory only cookie store. Notice if bridgeEndpoint=true then the cookie store is forced to be a noop cookie store as cookie shouldn’t be stored as we are just bridging (eg acting as a proxy). The option is a org.apache.http.client.CookieStore type.		CookieStore
camel.component.http.copy-headers	If this option is true then IN exchange headers will be copied to OUT exchange headers according to copy strategy. Setting this to false, allows to only include the headers from the HTTP response (not propagating IN headers).	true	Boolean
camel.component.http.default-user-agent-disabled	Disables the default user agent set by this builder if none has been provided by the user	false	Boolean
camel.component.http.enabled	Whether to enable auto configuration of the http component. This is enabled by default.		Boolean
camel.component.http.header-filter-strategy	To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message. The option is a org.apache.camel.spi.HeaderFilterStrategy type.		HeaderFilterStrategy
camel.component.http.http-binding	To use a custom HttpBinding to control the mapping between Camel message and HttpClient. The option is a org.apache.camel.http.common.HttpBinding type.		HttpBinding
camel.component.http.http-client-configurer	To use the custom HttpClientConfigurer to perform configuration of the HttpClient that will be used. The option is a org.apache.camel.component.http.HttpClientConfigurer type.		HttpClientConfigurer
camel.component.http.http-configuration	To use the shared HttpConfiguration as base configuration. The option is a org.apache.camel.http.common.HttpConfiguration type.		HttpConfiguration
camel.component.http.http-context	To use a custom org.apache.http.protocol.HttpContext when executing requests. The option is a org.apache.http.protocol.HttpContext type.		HttpContext
camel.component.http.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.http.max-total-connections	The maximum number of connections.	200	Integer
camel.component.http.proxy-auth-domain	Proxy authentication domain to use		String
camel.component.http.proxy-auth-host	Proxy authentication host		String
camel.component.http.proxy-auth-method	Proxy authentication method to use		String
camel.component.http.proxy-auth-nt-host	Proxy authentication domain (workstation name) to use with NTML		String
camel.component.http.proxy-auth-password	Proxy authentication password		String
camel.component.http.proxy-auth-port	Proxy authentication port		Integer
camel.component.http.proxy-auth-username	Proxy authentication username		String
camel.component.http.redirect-handling-disabled	Disables automatic redirect handling	false	Boolean
camel.component.http.response-payload-streaming-threshold	This threshold in bytes controls whether the response payload should be stored in memory as a byte array or be streaming based. Set this to -1 to always use streaming mode.	8192	Integer
camel.component.http.skip-request-headers	Whether to skip mapping all the Camel headers as HTTP request headers. If there are no data from Camel headers needed to be included in the HTTP request then this can avoid parsing overhead with many object allocations for the JVM garbage collector.	false	Boolean
camel.component.http.skip-response-headers	Whether to skip mapping all the HTTP response headers to Camel headers. If there are no data needed from HTTP headers then this can avoid parsing overhead with many object allocations for the JVM garbage collector.	false	Boolean
camel.component.http.socket-timeout	Defines the socket timeout in milliseconds, which is the timeout for waiting for data or, put differently, a maximum period inactivity between two consecutive data packets). A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default).	-1	Integer
camel.component.http.ssl-context-parameters	To configure security using SSLContextParameters. Important: Only one instance of org.apache.camel.support.jsse.SSLContextParameters is supported per HttpComponent. If you need to use 2 or more different instances, you need to define a new HttpComponent per instance you need. The option is a org.apache.camel.support.jsse.SSLContextParameters type.		SSLContextParameters
camel.component.http.use-global-ssl-context-parameters	Enable usage of global SSL context parameters.	false	Boolean
camel.component.http.x509-hostname-verifier	To use a custom X509HostnameVerifier such as DefaultHostnameVerifier or NoopHostnameVerifier. The option is a javax.net.ssl.HostnameVerifier type.		HostnameVerifier

Name

Description

Default

Type

camel.component.http.allow-java-serialized-object

Whether to allow java serialization when a request uses context-type=application/x-java-serialized-object. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.

false

Boolean

camel.component.http.auth-caching-disabled

Disables authentication scheme caching

false

Boolean

camel.component.http.automatic-retries-disabled

Disables automatic request recovery and re-execution

false

Boolean

camel.component.http.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.http.client-connection-manager

To use a custom and shared HttpClientConnectionManager to manage connections. If this has been configured then this is always used for all endpoints created by this component. The option is a org.apache.http.conn.HttpClientConnectionManager type.

HttpClientConnectionManager

camel.component.http.connect-timeout

Determines the timeout in milliseconds until a connection is established. A timeout value of zero is interpreted as an infinite timeout. A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default).

-1

Integer

camel.component.http.connection-request-timeout

The timeout in milliseconds used when requesting a connection from the connection manager. A timeout value of zero is interpreted as an infinite timeout. A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default).

-1

Integer

camel.component.http.connection-state-disabled

Disables connection state tracking

false

Boolean

camel.component.http.connection-time-to-live

The time for connection to live, the time unit is millisecond, the default value is always keep alive.

Long

camel.component.http.connections-per-route

The maximum number of connections per route.

20

Integer

camel.component.http.content-compression-disabled

Disables automatic content decompression

false

Boolean

camel.component.http.cookie-management-disabled

Disables state (cookie) management

false

Boolean

camel.component.http.cookie-store

To use a custom org.apache.http.client.CookieStore. By default the org.apache.http.impl.client.BasicCookieStore is used which is an in-memory only cookie store. Notice if bridgeEndpoint=true then the cookie store is forced to be a noop cookie store as cookie shouldn’t be stored as we are just bridging (eg acting as a proxy). The option is a org.apache.http.client.CookieStore type.

CookieStore

camel.component.http.copy-headers

If this option is true then IN exchange headers will be copied to OUT exchange headers according to copy strategy. Setting this to false, allows to only include the headers from the HTTP response (not propagating IN headers).

true

Boolean

camel.component.http.default-user-agent-disabled

Disables the default user agent set by this builder if none has been provided by the user

false

Boolean

camel.component.http.enabled

Whether to enable auto configuration of the http component. This is enabled by default.

Boolean

camel.component.http.header-filter-strategy

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message. The option is a org.apache.camel.spi.HeaderFilterStrategy type.

HeaderFilterStrategy

camel.component.http.http-binding

To use a custom HttpBinding to control the mapping between Camel message and HttpClient. The option is a org.apache.camel.http.common.HttpBinding type.

HttpBinding

camel.component.http.http-client-configurer

To use the custom HttpClientConfigurer to perform configuration of the HttpClient that will be used. The option is a org.apache.camel.component.http.HttpClientConfigurer type.

HttpClientConfigurer

camel.component.http.http-configuration

To use the shared HttpConfiguration as base configuration. The option is a org.apache.camel.http.common.HttpConfiguration type.

HttpConfiguration

camel.component.http.http-context

To use a custom org.apache.http.protocol.HttpContext when executing requests. The option is a org.apache.http.protocol.HttpContext type.

HttpContext

camel.component.http.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.http.max-total-connections

The maximum number of connections.

200

Integer

camel.component.http.proxy-auth-domain

Proxy authentication domain to use

String

camel.component.http.proxy-auth-host

Proxy authentication host

String

camel.component.http.proxy-auth-method

Proxy authentication method to use

String

camel.component.http.proxy-auth-nt-host

Proxy authentication domain (workstation name) to use with NTML

String

camel.component.http.proxy-auth-password

Proxy authentication password

String

camel.component.http.proxy-auth-port

Proxy authentication port

Integer

camel.component.http.proxy-auth-username

Proxy authentication username

String

camel.component.http.redirect-handling-disabled

Disables automatic redirect handling

false

Boolean

camel.component.http.response-payload-streaming-threshold

This threshold in bytes controls whether the response payload should be stored in memory as a byte array or be streaming based. Set this to -1 to always use streaming mode.

8192

Integer

camel.component.http.skip-request-headers

Whether to skip mapping all the Camel headers as HTTP request headers. If there are no data from Camel headers needed to be included in the HTTP request then this can avoid parsing overhead with many object allocations for the JVM garbage collector.

false

Boolean

camel.component.http.skip-response-headers

Whether to skip mapping all the HTTP response headers to Camel headers. If there are no data needed from HTTP headers then this can avoid parsing overhead with many object allocations for the JVM garbage collector.

false

Boolean

camel.component.http.socket-timeout

Defines the socket timeout in milliseconds, which is the timeout for waiting for data or, put differently, a maximum period inactivity between two consecutive data packets). A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default).

-1

Integer

camel.component.http.ssl-context-parameters

To configure security using SSLContextParameters. Important: Only one instance of org.apache.camel.support.jsse.SSLContextParameters is supported per HttpComponent. If you need to use 2 or more different instances, you need to define a new HttpComponent per instance you need. The option is a org.apache.camel.support.jsse.SSLContextParameters type.

SSLContextParameters

camel.component.http.use-global-ssl-context-parameters

Enable usage of global SSL context parameters.

false

Boolean

camel.component.http.x509-hostname-verifier

To use a custom X509HostnameVerifier such as DefaultHostnameVerifier or NoopHostnameVerifier. The option is a javax.net.ssl.HostnameVerifier type.

HostnameVerifier