Resteasy

Since Camel 3.4

Both producer and consumer are supported

The resteasy: component provides HTTP based endpoints for consuming HTTP requests that arrive at a HTTP endpoint that is bound to a published Servlet.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-resteasy</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

resteasy://relative_path[?options]

You can append query options to the URI in the following format: ?option=value&option=value&…

Options

The Resteasy component supports 17 options, which are listed below.

Name	Description	Default	Type
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
proxyConsumersClasses (consumer)	Proxy classes for consumer endpoints. Multiple classes can be separated by comma.		String
copyHeaders (producer)	If this option is true then IN exchange headers will be copied to OUT exchange headers according to copy strategy. Setting this to false, allows to only include the headers from the HTTP response (not propagating IN headers).	true	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
responsePayloadStreamingThreshold (producer)	This threshold in bytes controls whether the response payload should be stored in memory as a byte array or be streaming based. Set this to -1 to always use streaming mode.	8192	int
skipRequestHeaders (producer)	Whether to skip mapping all the Camel headers as HTTP request headers. If there are no data from Camel headers needed to be included in the HTTP request then this can avoid parsing overhead with many object allocations for the JVM garbage collector.	false	boolean
skipResponseHeaders (producer)	Whether to skip mapping all the HTTP response headers to Camel headers. If there are no data needed from HTTP headers then this can avoid parsing overhead with many object allocations for the JVM garbage collector.	false	boolean
allowJavaSerializedObject (advanced)	Whether to allow java serialization when a request uses context-type=application/x-java-serialized-object. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.	false	boolean
authCachingDisabled (advanced)	Disables authentication scheme caching	false	boolean
automaticRetriesDisabled (advanced)	Disables automatic request recovery and re-execution	false	boolean
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
connectionStateDisabled (advanced)	Disables connection state tracking	false	boolean
contentCompressionDisabled (advanced)	Disables automatic content decompression	false	boolean
cookieManagementDisabled (advanced)	Disables state (cookie) management	false	boolean
defaultUserAgentDisabled (advanced)	Disables the default user agent set by this builder if none has been provided by the user	false	boolean
redirectHandlingDisabled (advanced)	Disables automatic redirect handling	false	boolean
headerFilterStrategy (filter)	To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message.		HeaderFilterStrategy

Name

Description

Default

Type

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

proxyConsumersClasses (consumer)

Proxy classes for consumer endpoints. Multiple classes can be separated by comma.

String

copyHeaders (producer)

If this option is true then IN exchange headers will be copied to OUT exchange headers according to copy strategy. Setting this to false, allows to only include the headers from the HTTP response (not propagating IN headers).

true

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

responsePayloadStreamingThreshold (producer)

This threshold in bytes controls whether the response payload should be stored in memory as a byte array or be streaming based. Set this to -1 to always use streaming mode.

8192

int

skipRequestHeaders (producer)

Whether to skip mapping all the Camel headers as HTTP request headers. If there are no data from Camel headers needed to be included in the HTTP request then this can avoid parsing overhead with many object allocations for the JVM garbage collector.

false

boolean

skipResponseHeaders (producer)

Whether to skip mapping all the HTTP response headers to Camel headers. If there are no data needed from HTTP headers then this can avoid parsing overhead with many object allocations for the JVM garbage collector.

false

boolean

allowJavaSerializedObject (advanced)

Whether to allow java serialization when a request uses context-type=application/x-java-serialized-object. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.

false

boolean

authCachingDisabled (advanced)

Disables authentication scheme caching

false

boolean

automaticRetriesDisabled (advanced)

Disables automatic request recovery and re-execution

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

connectionStateDisabled (advanced)

Disables connection state tracking

false

boolean

contentCompressionDisabled (advanced)

Disables automatic content decompression

false

boolean

cookieManagementDisabled (advanced)

Disables state (cookie) management

false

boolean

defaultUserAgentDisabled (advanced)

Disables the default user agent set by this builder if none has been provided by the user

false

boolean

redirectHandlingDisabled (advanced)

Disables automatic redirect handling

false

boolean

headerFilterStrategy (filter)

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message.

HeaderFilterStrategy

The Resteasy endpoint is configured using URI syntax:

resteasy:httpUri

with the following path and query parameters:

Path Parameters (1 parameters):

Name	Description	Default	Type
httpUri	Required The url of the HTTP endpoint to call.		URI

Name

Description

Default

Type

httpUri

Required The url of the HTTP endpoint to call.

URI

Query Parameters (42 parameters):

Name	Description	Default	Type
chunked (common)	If this option is false the Servlet will disable the HTTP streaming and set the content-length header on the response	true	boolean
disableStreamCache (common)	Determines whether or not the raw input stream from Servlet is cached or not (Camel will read the stream into a in memory/overflow to file, Stream caching) cache. By default Camel will cache the Servlet input stream to support reading it multiple times to ensure it Camel can retrieve all data from the stream. However you can set this option to true when you for example need to access the raw stream, such as streaming it directly to a file or other persistent store. DefaultHttpBinding will copy the request input stream into a stream cache and put it into message body if this option is false to support reading the stream multiple times. If you use Servlet to bridge/proxy an endpoint then consider enabling this option to improve performance, in case you do not need to read the message payload multiple times. The http producer will by default cache the response body stream. If setting this option to true, then the producers will not cache the response body stream but use the response stream as-is as the message body.	false	boolean
resteasyMethod (common)	Sets the resteasy method to process the request	GET	String
servletName (common)	Sets the servlet name		String
transferException (common)	If enabled and an Exchange failed processing on the consumer side, and if the caused Exception was send back serialized in the response as a application/x-java-serialized-object content type. On the producer side the exception will be deserialized and thrown as is, instead of the HttpOperationFailedException. The caused exception is required to be serialized. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.	false	boolean
async (consumer)	Configure the consumer to work in async mode	false	boolean
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
httpMethodRestrict (consumer)	Used to only allow consuming if the HttpMethod matches, such as GET/POST/PUT etc. Multiple methods can be specified separated by comma.		String
matchOnUriPrefix (consumer)	Whether or not the consumer should try to find a target consumer by matching the URI prefix if no exact match is found.	false	boolean
muteException (consumer)	If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.	false	boolean
responseBufferSize (consumer)	To use a custom buffer size on the javax.servlet.ServletResponse.		Integer
eagerCheckContentAvailable (consumer)	Whether to eager check whether the HTTP requests has content if the content-length header is 0 or not present. This can be turned on in case HTTP clients do not send streamed data.	false	boolean
exceptionHandler (consumer)	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer)	Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut		ExchangePattern
mapHttpMessageBody (consumer)	If this option is true then IN exchange Body of the exchange will be mapped to HTTP body. Setting this to false will avoid the HTTP mapping.	true	boolean
mapHttpMessageFormUrlEncodedBody (consumer)	If this option is true then IN exchange Form Encoded body of the exchange will be mapped to HTTP. Setting this to false will avoid the HTTP Form Encoded body mapping.	true	boolean
mapHttpMessageHeaders (consumer)	If this option is true then IN exchange Headers of the exchange will be mapped to HTTP headers. Setting this to false will avoid the HTTP Headers mapping.	true	boolean
optionsEnabled (consumer)	Specifies whether to enable HTTP OPTIONS for this Servlet consumer. By default OPTIONS is turned off.	false	boolean
traceEnabled (consumer)	Specifies whether to enable HTTP TRACE for this Servlet consumer. By default TRACE is turned off.	false	boolean
bridgeEndpoint (producer)	If the option is true, HttpProducer will ignore the Exchange.HTTP_URI header, and use the endpoint’s URI for request. You may also set the option throwExceptionOnFailure to be false to let the HttpProducer send all the fault response back.	false	boolean
clearExpiredCookies (producer)	Whether to clear expired cookies before sending the HTTP request. This ensures the cookies store does not keep growing by adding new cookies which is newer removed when they are expired. If the component has disabled cookie management then this option is disabled too.	true	boolean
connectionClose (producer)	Specifies whether a Connection Close header must be added to HTTP Request. By default connectionClose is false.	false	boolean
copyHeaders (producer)	If this option is true then IN exchange headers will be copied to OUT exchange headers according to copy strategy. Setting this to false, allows to only include the headers from the HTTP response (not propagating IN headers).	true	boolean
customHostHeader (producer)	To use custom host header for producer. When not set in query will be ignored. When set will override host header derived from url.		String
httpMethod (producer)	Configure the HTTP method to use. The HttpMethod header cannot override this option if set. There are 8 enums and the value can be one of: GET, POST, PUT, DELETE, HEAD, OPTIONS, TRACE, PATCH		HttpMethods
ignoreResponseBody (producer)	If this option is true, The http producer won’t read response body and cache the input stream	false	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
preserveHostHeader (producer)	If the option is true, HttpProducer will set the Host header to the value contained in the current exchange Host header, useful in reverse proxy applications where you want the Host header received by the downstream server to reflect the URL called by the upstream client, this allows applications which use the Host header to generate accurate URL’s for a proxied service	false	boolean
throwExceptionOnFailure (producer)	Option to disable throwing the HttpOperationFailedException in case of failed responses from the remote server. This allows you to get all responses regardless of the HTTP status code.	true	boolean
cookieHandler (producer)	Configure a cookie handler to maintain a HTTP session		CookieHandler
deleteWithBody (producer)	Whether the HTTP DELETE should include the message body or not. By default HTTP DELETE do not include any HTTP body. However in some rare cases users may need to be able to include the message body.	false	boolean
getWithBody (producer)	Whether the HTTP GET should include the message body or not. By default HTTP GET do not include any HTTP body. However in some rare cases users may need to be able to include the message body.	false	boolean
okStatusCodeRange (producer)	The status codes which are considered a success response. The values are inclusive. Multiple ranges can be defined, separated by comma, e.g. 200-204,209,301-304. Each range must be a single number or from-to with the dash included.	200-299	String
skipRequestHeaders (producer)	Whether to skip mapping all the Camel headers as HTTP request headers. If there are no data from Camel headers needed to be included in the HTTP request then this can avoid parsing overhead with many object allocations for the JVM garbage collector.	false	boolean
skipResponseHeaders (producer)	Whether to skip mapping all the HTTP response headers to Camel headers. If there are no data needed from HTTP headers then this can avoid parsing overhead with many object allocations for the JVM garbage collector.	false	boolean
headerFilterStrategy (advanced)	To use a custom HeaderFilterStrategy to filter header to and from Camel message.		HeaderFilterStrategy
setHttpResponseDuringProcessing (advanced)	Sets the flag to use the endpoint where you can either populate camel exchange from servlet response or use request itself which may be thought as if it is a proxy.		Boolean
skipServletProcessing (advanced)	Sets the flag to use skip servlet processing and let camel take over processing		Boolean
useSystemProperties (advanced)	To use System Properties as fallback for configuration	false	boolean
proxyClientClass (proxy)	Sets the resteasy proxyClientClass		String
password (security)	Sets the password		String
username (security)	Sets the username		String

Name

Description

Default

Type

chunked (common)

If this option is false the Servlet will disable the HTTP streaming and set the content-length header on the response

true

boolean

disableStreamCache (common)

Determines whether or not the raw input stream from Servlet is cached or not (Camel will read the stream into a in memory/overflow to file, Stream caching) cache. By default Camel will cache the Servlet input stream to support reading it multiple times to ensure it Camel can retrieve all data from the stream. However you can set this option to true when you for example need to access the raw stream, such as streaming it directly to a file or other persistent store. DefaultHttpBinding will copy the request input stream into a stream cache and put it into message body if this option is false to support reading the stream multiple times. If you use Servlet to bridge/proxy an endpoint then consider enabling this option to improve performance, in case you do not need to read the message payload multiple times. The http producer will by default cache the response body stream. If setting this option to true, then the producers will not cache the response body stream but use the response stream as-is as the message body.

false

boolean

resteasyMethod (common)

Sets the resteasy method to process the request

GET

String

servletName (common)

Sets the servlet name

String

transferException (common)

If enabled and an Exchange failed processing on the consumer side, and if the caused Exception was send back serialized in the response as a application/x-java-serialized-object content type. On the producer side the exception will be deserialized and thrown as is, instead of the HttpOperationFailedException. The caused exception is required to be serialized. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.

false

boolean

async (consumer)

Configure the consumer to work in async mode

false

boolean

bridgeErrorHandler (consumer)

false

boolean

httpMethodRestrict (consumer)

Used to only allow consuming if the HttpMethod matches, such as GET/POST/PUT etc. Multiple methods can be specified separated by comma.

String

matchOnUriPrefix (consumer)

Whether or not the consumer should try to find a target consumer by matching the URI prefix if no exact match is found.

false

boolean

muteException (consumer)

If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.

false

boolean

responseBufferSize (consumer)

To use a custom buffer size on the javax.servlet.ServletResponse.

Integer

eagerCheckContentAvailable (consumer)

Whether to eager check whether the HTTP requests has content if the content-length header is 0 or not present. This can be turned on in case HTTP clients do not send streamed data.

false

boolean

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

mapHttpMessageBody (consumer)

If this option is true then IN exchange Body of the exchange will be mapped to HTTP body. Setting this to false will avoid the HTTP mapping.

true

boolean

mapHttpMessageFormUrlEncodedBody (consumer)

If this option is true then IN exchange Form Encoded body of the exchange will be mapped to HTTP. Setting this to false will avoid the HTTP Form Encoded body mapping.

true

boolean

mapHttpMessageHeaders (consumer)

If this option is true then IN exchange Headers of the exchange will be mapped to HTTP headers. Setting this to false will avoid the HTTP Headers mapping.

true

boolean

optionsEnabled (consumer)

Specifies whether to enable HTTP OPTIONS for this Servlet consumer. By default OPTIONS is turned off.

false

boolean

traceEnabled (consumer)

Specifies whether to enable HTTP TRACE for this Servlet consumer. By default TRACE is turned off.

false

boolean

bridgeEndpoint (producer)

If the option is true, HttpProducer will ignore the Exchange.HTTP_URI header, and use the endpoint’s URI for request. You may also set the option throwExceptionOnFailure to be false to let the HttpProducer send all the fault response back.

false

boolean

clearExpiredCookies (producer)

Whether to clear expired cookies before sending the HTTP request. This ensures the cookies store does not keep growing by adding new cookies which is newer removed when they are expired. If the component has disabled cookie management then this option is disabled too.

true

boolean

connectionClose (producer)

Specifies whether a Connection Close header must be added to HTTP Request. By default connectionClose is false.

false

boolean

copyHeaders (producer)

true

boolean

customHostHeader (producer)

To use custom host header for producer. When not set in query will be ignored. When set will override host header derived from url.

String

httpMethod (producer)

Configure the HTTP method to use. The HttpMethod header cannot override this option if set. There are 8 enums and the value can be one of: GET, POST, PUT, DELETE, HEAD, OPTIONS, TRACE, PATCH

HttpMethods

ignoreResponseBody (producer)

If this option is true, The http producer won’t read response body and cache the input stream

false

boolean

lazyStartProducer (producer)

false

boolean

preserveHostHeader (producer)

If the option is true, HttpProducer will set the Host header to the value contained in the current exchange Host header, useful in reverse proxy applications where you want the Host header received by the downstream server to reflect the URL called by the upstream client, this allows applications which use the Host header to generate accurate URL’s for a proxied service

false

boolean

throwExceptionOnFailure (producer)

Option to disable throwing the HttpOperationFailedException in case of failed responses from the remote server. This allows you to get all responses regardless of the HTTP status code.

true

boolean

cookieHandler (producer)

Configure a cookie handler to maintain a HTTP session

CookieHandler

deleteWithBody (producer)

Whether the HTTP DELETE should include the message body or not. By default HTTP DELETE do not include any HTTP body. However in some rare cases users may need to be able to include the message body.

false

boolean

getWithBody (producer)

Whether the HTTP GET should include the message body or not. By default HTTP GET do not include any HTTP body. However in some rare cases users may need to be able to include the message body.

false

boolean

okStatusCodeRange (producer)

The status codes which are considered a success response. The values are inclusive. Multiple ranges can be defined, separated by comma, e.g. 200-204,209,301-304. Each range must be a single number or from-to with the dash included.

200-299

String

skipRequestHeaders (producer)

false

boolean

skipResponseHeaders (producer)

false

boolean

headerFilterStrategy (advanced)

To use a custom HeaderFilterStrategy to filter header to and from Camel message.

HeaderFilterStrategy

setHttpResponseDuringProcessing (advanced)

Sets the flag to use the endpoint where you can either populate camel exchange from servlet response or use request itself which may be thought as if it is a proxy.

Boolean

skipServletProcessing (advanced)

Sets the flag to use skip servlet processing and let camel take over processing

Boolean

useSystemProperties (advanced)

To use System Properties as fallback for configuration

false

boolean

proxyClientClass (proxy)

Sets the resteasy proxyClientClass

String

password (security)

Sets the password

String

username (security)

Sets the username

String

Usage

Consumer endpoints are similar to endpoints generated by the Servlet component. Therefore, it should be used only as input into your Camel routes. To issue HTTP requests against other HTTP endpoints, use the HTTP Component.

Producer endpoints rely on Resteasy Client API. https://docs.jboss.org/resteasy/docs/4.5.3.Final/userguide/html_single/index.html#RESTEasy_Client_Framework

Putting Camel JARs in the app server boot classpath

Refer same section of Servlet Component.

Sample

As a basic consumer with Spring example, first, you need to publish the servlet using the Web.xml file to publish

Notice that below two listeners are registered when application server is initialized. The org.jboss.resteasy.plugins.server.servlet.ResteasyBootstrap class is a ServletContextListener that configures an instance of an ResteasyProviderFactory and Registry. You can obtain instances of a ResteasyProviderFactory and Registry from the ServletContext attributes org.jboss.resteasy.spi.ResteasyProviderFactory and org.jboss.resteasy.spi.Registry. From these instances you can programmatically interact with RESTEasy registration interfaces. Please note that the SpringContextLoaderListener must be declared after ResteasyBootstrap as it uses ServletContext attributes initialized by it. For further details please refer to https://docs.jboss.org/resteasy/docs/4.5.3.Final/userguide/html_single/index.html#RESTEasy_Spring_Integration

<web-app>
    <context-param>
        <param-name>contextConfigLocation</param-name>
        <param-value>WEB-INF/applicationContext.xml</param-value>
    </context-param>
    <listener>
        <listener-class>org.jboss.resteasy.plugins.server.servlet.ResteasyBootstrap</listener-class>
    </listener>

    <listener>
        <listener-class>org.jboss.resteasy.plugins.spring.SpringContextLoaderListener</listener-class>
    </listener>

    <servlet>
        <servlet-name>resteasy-camel-servlet</servlet-name>
        <servlet-class>org.apache.camel.component.resteasy.servlet.ResteasyCamelServlet</servlet-class>
    </servlet>

    <servlet-mapping>
        <servlet-name>resteasy-camel-servlet</servlet-name>
        <url-pattern>/*</url-pattern>
    </servlet-mapping>

</web-app>

Then you can define your route as follows:

<context:component-scan base-package="org.apache.camel.component.resteasy.test">
    <context:include-filter type="annotation" expression="javax.ws.rs.Path"/>
</context:component-scan>

    ........

<camel:camelContext>

    <camel:route>
        <camel:from uri="resteasy:/customer/getAll?servletName=resteasy-camel-servlet"/>
        <camel:to uri="file://target/test/consumerTest?fileName=all.txt"/>
    </camel:route>

 </camel:camelContext>

Notice that component-scan is important to load resteasy servlet properly into container’s runtime.

Spring Boot Auto-Configuration

When using resteasy with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-resteasy-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 18 options, which are listed below.

Name	Description	Default	Type
camel.component.resteasy.allow-java-serialized-object	Whether to allow java serialization when a request uses context-type=application/x-java-serialized-object. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.	false	Boolean
camel.component.resteasy.auth-caching-disabled	Disables authentication scheme caching	false	Boolean
camel.component.resteasy.automatic-retries-disabled	Disables automatic request recovery and re-execution	false	Boolean
camel.component.resteasy.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.resteasy.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.resteasy.connection-state-disabled	Disables connection state tracking	false	Boolean
camel.component.resteasy.content-compression-disabled	Disables automatic content decompression	false	Boolean
camel.component.resteasy.cookie-management-disabled	Disables state (cookie) management	false	Boolean
camel.component.resteasy.copy-headers	If this option is true then IN exchange headers will be copied to OUT exchange headers according to copy strategy. Setting this to false, allows to only include the headers from the HTTP response (not propagating IN headers).	true	Boolean
camel.component.resteasy.default-user-agent-disabled	Disables the default user agent set by this builder if none has been provided by the user	false	Boolean
camel.component.resteasy.enabled	Whether to enable auto configuration of the resteasy component. This is enabled by default.		Boolean
camel.component.resteasy.header-filter-strategy	To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message. The option is a org.apache.camel.spi.HeaderFilterStrategy type.		HeaderFilterStrategy
camel.component.resteasy.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.resteasy.proxy-consumers-classes	Proxy classes for consumer endpoints. Multiple classes can be separated by comma.		String
camel.component.resteasy.redirect-handling-disabled	Disables automatic redirect handling	false	Boolean
camel.component.resteasy.response-payload-streaming-threshold	This threshold in bytes controls whether the response payload should be stored in memory as a byte array or be streaming based. Set this to -1 to always use streaming mode.	8192	Integer
camel.component.resteasy.skip-request-headers	Whether to skip mapping all the Camel headers as HTTP request headers. If there are no data from Camel headers needed to be included in the HTTP request then this can avoid parsing overhead with many object allocations for the JVM garbage collector.	false	Boolean
camel.component.resteasy.skip-response-headers	Whether to skip mapping all the HTTP response headers to Camel headers. If there are no data needed from HTTP headers then this can avoid parsing overhead with many object allocations for the JVM garbage collector.	false	Boolean

Name

Description

Default

Type

camel.component.resteasy.allow-java-serialized-object

false

Boolean

camel.component.resteasy.auth-caching-disabled

Disables authentication scheme caching

false

Boolean

camel.component.resteasy.automatic-retries-disabled

Disables automatic request recovery and re-execution

false

Boolean

camel.component.resteasy.autowired-enabled

true

Boolean

camel.component.resteasy.bridge-error-handler

false

Boolean

camel.component.resteasy.connection-state-disabled

Disables connection state tracking

false

Boolean

camel.component.resteasy.content-compression-disabled

Disables automatic content decompression

false

Boolean

camel.component.resteasy.cookie-management-disabled

Disables state (cookie) management

false

Boolean

camel.component.resteasy.copy-headers

true

Boolean

camel.component.resteasy.default-user-agent-disabled

Disables the default user agent set by this builder if none has been provided by the user

false

Boolean

camel.component.resteasy.enabled

Whether to enable auto configuration of the resteasy component. This is enabled by default.

Boolean

camel.component.resteasy.header-filter-strategy

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message. The option is a org.apache.camel.spi.HeaderFilterStrategy type.

HeaderFilterStrategy

camel.component.resteasy.lazy-start-producer

false

Boolean

camel.component.resteasy.proxy-consumers-classes

Proxy classes for consumer endpoints. Multiple classes can be separated by comma.

String

camel.component.resteasy.redirect-handling-disabled

Disables automatic redirect handling

false

Boolean

camel.component.resteasy.response-payload-streaming-threshold

This threshold in bytes controls whether the response payload should be stored in memory as a byte array or be streaming based. Set this to -1 to always use streaming mode.

8192

Integer

camel.component.resteasy.skip-request-headers

false

Boolean

camel.component.resteasy.skip-response-headers

false

Boolean