Velocity

Since Camel 1.2

Only producer is supported

The Velocity component allows you to process a message using an Apache Velocity template. This can be ideal when using Templating to generate responses for requests.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-velocity</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

velocity:templateName[?options]

Where templateName is the classpath-local URI of the template to invoke; or the complete URL of the remote template (eg: file://folder/myfile.vm).

You can append query options to the URI in the following format, ?option=value&option=value&…​

Options

The Velocity component supports 5 options, which are listed below.

Name Description Default Type

allowContextMapAll (producer)

Sets whether the context map should allow access to all details. By default only the message body and headers can be accessed. This option can be enabled for full access to the current Exchange and CamelContext. Doing so impose a potential security risk as this opens access to the full power of CamelContext API.

false

boolean

allowTemplateFromHeader (producer)

Whether to allow to use resource template from header or not (default false). Enabling this allows to specify dynamic templates via message header. However this can be seen as a potential security vulnerability if the header is coming from a malicious user, so use this with care.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

velocityEngine (advanced)

To use the VelocityEngine otherwise a new engine is created

VelocityEngine

The Velocity endpoint is configured using URI syntax:

velocity:resourceUri

with the following path and query parameters:

Path Parameters (1 parameters):

Name Description Default Type

resourceUri

Required Path to the resource. You can prefix with: classpath, file, http, ref, or bean. classpath, file and http loads the resource using these protocols (classpath is default). ref will lookup the resource in the registry. bean will call a method on a bean to be used as the resource. For bean you can specify the method name after dot, eg bean:myBean.myMethod.

String

Query Parameters (7 parameters):

Name Description Default Type

allowContextMapAll (producer)

Sets whether the context map should allow access to all details. By default only the message body and headers can be accessed. This option can be enabled for full access to the current Exchange and CamelContext. Doing so impose a potential security risk as this opens access to the full power of CamelContext API.

false

boolean

allowTemplateFromHeader (producer)

Whether to allow to use resource template from header or not (default false). Enabling this allows to specify dynamic templates via message header. However this can be seen as a potential security vulnerability if the header is coming from a malicious user, so use this with care.

false

boolean

contentCache (producer)

Sets whether to use resource content cache or not

false

boolean

encoding (producer)

Character encoding of the resource content.

String

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

loaderCache (producer)

Enables / disables the velocity resource loader cache which is enabled by default

true

boolean

propertiesFile (producer)

The URI of the properties file which is used for VelocityEngine initialization.

String

Message Headers

You can use the following headers on the message:

Header Description

CamelVelocityResourceUri

The templateName as a String object.

CamelVelocitySupplementalContext

To add additional information to the used VelocityContext. The value of this header should be a Map with key/values that will added (override any existing key with the same name).
This can be used to pre setup some common key/values you want to reuse in your velocity endpoints.

Headers set during the Velocity evaluation are returned to the message and added as headers. Then its kinda possible to return values from Velocity to the Message.

For example, to set the header value of fruit in the Velocity template .tm:

$in.setHeader("fruit", "Apple")

The fruit header is now accessible from the message.out.headers.

Velocity Context

Camel will provide exchange information in the Velocity context (just a Map). The Exchange is transfered as:

key value

exchange

The Exchange itself.

exchange.properties

The Exchange properties.

headers

The headers of the In message.

camelContext

The Camel Context instance.

request

The In message.

in

The In message.

body

The In message body.

out

The Out message (only for InOut message exchange pattern).

response

The Out message (only for InOut message exchange pattern).

You can setup a custom Velocity Context yourself by setting the message header *CamelVelocityContext *just like this

   VelocityContext velocityContext = new VelocityContext(variableMap);
   exchange.getIn().setHeader("CamelVelocityContext", velocityContext);

Hot reloading

The Velocity template resource is, by default, hot reloadable for both file and classpath resources (expanded jar). If you set contentCache=true, Camel will only load the resource once, and thus hot reloading is not possible. This scenario can be used in production, when the resource never changes.

Dynamic templates

Since Camel 2.1
Camel provides two headers by which you can define a different resource location for a template or the template content itself. If any of these headers is set then Camel uses this over the endpoint configured resource. This allows you to provide a dynamic template at runtime.

Header Type Description

CamelVelocityResourceUri

String

A URI for the template resource to use instead of the endpoint configured.

CamelVelocityTemplate

String

The template to use instead of the endpoint configured.

Samples

For example you could use something like

from("activemq:My.Queue").
  to("velocity:com/acme/MyResponse.vm");

To use a Velocity template to formulate a response to a message for InOut message exchanges (where there is a JMSReplyTo header).

If you want to use InOnly and consume the message and send it to another destination, you could use the following route:

from("activemq:My.Queue").
  to("velocity:com/acme/MyResponse.vm").
  to("activemq:Another.Queue");

And to use the content cache, e.g. for use in production, where the .vm template never changes:

from("activemq:My.Queue").
  to("velocity:com/acme/MyResponse.vm?contentCache=true").
  to("activemq:Another.Queue");

And a file based resource:

from("activemq:My.Queue").
  to("velocity:file://myfolder/MyResponse.vm?contentCache=true").
  to("activemq:Another.Queue");

It’s possible to specify what template the component should use dynamically via a header, so for example:

from("direct:in").
  setHeader("CamelVelocityResourceUri").constant("path/to/my/template.vm").
  to("velocity:dummy?allowTemplateFromHeader=true"");

It’s possible to specify a template directly as a header the component should use dynamically via a header, so for example:

from("direct:in").
  setHeader("CamelVelocityTemplate").constant("Hi this is a velocity template that can do templating ${body}").
  to("velocity:dummy?allowTemplateFromHeader=true"");

The Email Sample

In this sample we want to use Velocity templating for an order confirmation email. The email template is laid out in Velocity as:

Dear ${headers.lastName}, ${headers.firstName}

Thanks for the order of ${headers.item}.

Regards Camel Riders Bookstore
${body}

And the java code:

Spring Boot Auto-Configuration

When using velocity with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-velocity-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 6 options, which are listed below.

Name Description Default Type

camel.component.velocity.allow-context-map-all

Sets whether the context map should allow access to all details. By default only the message body and headers can be accessed. This option can be enabled for full access to the current Exchange and CamelContext. Doing so impose a potential security risk as this opens access to the full power of CamelContext API.

false

Boolean

camel.component.velocity.allow-template-from-header

Whether to allow to use resource template from header or not (default false). Enabling this allows to specify dynamic templates via message header. However this can be seen as a potential security vulnerability if the header is coming from a malicious user, so use this with care.

false

Boolean

camel.component.velocity.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.velocity.enabled

Whether to enable auto configuration of the velocity component. This is enabled by default.

Boolean

camel.component.velocity.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.velocity.velocity-engine

To use the VelocityEngine otherwise a new engine is created. The option is a org.apache.velocity.app.VelocityEngine type.

VelocityEngine
Back to top