XQuery

Since Camel 1.0

Both producer and consumer are supported

Camel supports XQuery component for message transformation

Options

The XQuery component supports 6 options, which are listed below.

Name Description Default Type

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

configuration (advanced)

To use a custom Saxon configuration

Configuration

configurationProperties (advanced)

To set custom Saxon configuration properties

Map

moduleURIResolver (advanced)

To use the custom ModuleURIResolver

ModuleURIResolver

The XQuery endpoint is configured using URI syntax:

xquery:resourceUri

with the following path and query parameters:

Path Parameters (1 parameters):

Name Description Default Type

resourceUri

Required The name of the template to load from classpath or file system

String

Query Parameters (32 parameters):

Name Description Default Type

allowStAX (common)

Whether to allow using StAX mode

false

boolean

headerName (common)

To use a Camel Message header as the input source instead of Message body.

String

namespacePrefixes (common)

Allows to control which namespace prefixes to use for a set of namespace mappings

Map

resultsFormat (common)

What output result to use. There are 7 enums and the value can be one of: Bytes, BytesSource, DOM, DOMSource, List, String, StringSource

DOM

ResultFormat

resultType (common)

What output result to use defined as a class

Class

stripsAllWhiteSpace (common)

Whether to strip all whitespaces

true

boolean

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

sendEmptyMessageWhenIdle (consumer)

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

boolean

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

pollStrategy (consumer)

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

PollingConsumerPollStrategy

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

configuration (advanced)

To use a custom Saxon configuration

Configuration

configurationProperties (advanced)

To set custom Saxon configuration properties

Map

moduleURIResolver (advanced)

To use the custom ModuleURIResolver

ModuleURIResolver

parameters (advanced)

Additional parameters

Map

properties (advanced)

Properties to configure the serialization parameters

Properties

staticQueryContext (advanced)

To use a custom Saxon StaticQueryContext

StaticQueryContext

backoffErrorThreshold (scheduler)

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

int

backoffIdleThreshold (scheduler)

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

int

backoffMultiplier (scheduler)

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

int

delay (scheduler)

Milliseconds before the next poll.

500

long

greedy (scheduler)

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

boolean

initialDelay (scheduler)

Milliseconds before the first poll starts.

1000

long

repeatCount (scheduler)

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

0

long

runLoggingLevel (scheduler)

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. There are 6 enums and the value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF

TRACE

LoggingLevel

scheduledExecutorService (scheduler)

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

ScheduledExecutorService

scheduler (scheduler)

To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler

none

Object

schedulerProperties (scheduler)

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

Map

startScheduler (scheduler)

Whether the scheduler should be auto started.

true

boolean

timeUnit (scheduler)

Time unit for initialDelay and delay options. There are 7 enums and the value can be one of: NANOSECONDS, MICROSECONDS, MILLISECONDS, SECONDS, MINUTES, HOURS, DAYS

MILLISECONDS

TimeUnit

useFixedDelay (scheduler)

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

boolean

Examples

from("queue:foo")
  .filter().xquery("//foo")
    .to("queue:bar")

You can also use functions inside your query, in which case you need an explicit type conversion (or you will get a org.w3c.dom.DOMException: HIERARCHY_REQUEST_ERR) by passing the Class as a second argument to the xquery() method.

from("direct:start")
  .recipientList().xquery("concat('mock:foo.', /person/@city)", String.class);

Variables

The IN message body will be set as the contextItem. Besides this these Variables is also added as parameters:

Variable Type Description

exchange

Exchange

The current Exchange

in.body

Object

The In message’s body

out.body

Object

The OUT message’s body (if any)

in.headers.*

Object

You can access the value of exchange.in.headers with key foo by using the variable which name is in.headers.foo

out.headers.*

Object

You can access the value of exchange.out.headers with key foo by using the variable which name is out.headers.foo variable

key name

Object

Any exchange.properties and exchange.in.headers and any additional parameters set using setParameters(Map). These parameters is added with they own key name, for instance if there is an IN header with the key name foo then its added as foo.

Using XML configuration

If you prefer to configure your routes in your Spring XML file then you can use XPath expressions as follows

<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:foo="http://example.com/person"
       xsi:schemaLocation="
       http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
       http://camel.apache.org/schema/spring http://camel.apache.org/schema/spring/camel-spring.xsd">

  <camelContext id="camel" xmlns="http://activemq.apache.org/camel/schema/spring">
    <route>
      <from uri="activemq:MyQueue"/>
      <filter>
        <xquery>/foo:person[@name='James']</xquery>
        <to uri="mqseries:SomeOtherQueue"/>
      </filter>
    </route>
  </camelContext>
</beans>

Notice how we can reuse the namespace prefixes, foo in this case, in the XPath expression for easier namespace based XQuery expressions!

When you use functions in your XQuery expression you need an explicit type conversion which is done in the xml configuration via the @type attribute:

    <xquery type="java.lang.String">concat('mock:foo.', /person/@city)</xquery>

Using XQuery as transformation

We can do a message translation using transform or setBody in the route, as shown below:

from("direct:start").
   transform().xquery("/people/person");

Notice that xquery will use DOMResult by default, so if we want to grab the value of the person node, using text() we need to tell xquery to use String as result type, as shown:

from("direct:start").
   transform().xquery("/people/person/text()", String.class);

If you want to use camel variables like headers, you have to explicitly declare them in the xquery expression.

<transform>
    <xquery>
        declare variable $in.headers.foo external;
        element item {$in.headers.foo}
    </xquery>
</transform>

Using XQuery as an endpoint

Sometimes an XQuery expression can be quite large; it can essentally be used for Templating. So you may want to use an XQuery Endpoint so you can route using XQuery templates.

The following example shows how to take a message of an ActiveMQ queue (MyQueue) and transform it using XQuery and send it to MQSeries.

  <camelContext id="camel" xmlns="http://camel.apache.org/schema/spring">
    <route>
      <from uri="activemq:MyQueue"/>
      <to uri="xquery:com/acme/someTransform.xquery"/>
      <to uri="mqseries:SomeOtherQueue"/>
    </route>
  </camelContext>

Examples

Here is a simple using an XQuery expression as a predicate in a Message Filter

from("direct:start")
  .filter().xquery("/person[@name='James']")
  .to("mock:result");

This uses XQuery with namespaces as a predicate in a Message Filter

Namespaces ns = new Namespaces("c", "http://acme.com/cheese");

from("direct:start")
  .filter().xquery("/c:person[@name='James']", ns)
  .to("mock:result");

Learning XQuery

XQuery is a very powerful language for querying, searching, sorting and returning XML. For help learning XQuery try these tutorials

Loading script from external resource

You can externalize the script and have Camel load it from a resource such as "classpath:", "file:", or "http:".
This is done using the following syntax: "resource:scheme:location", eg to refer to a file on the classpath you can do:

.setHeader("myHeader").xquery("resource:classpath:myxquery.txt", String.class)

Dependencies

To use XQuery in your camel routes you need to add the a dependency on camel-saxon which implements the XQuery language.

If you use maven you could just add the following to your pom.xml, substituting the version number for the latest & greatest release.

<dependency>
  <groupId>org.apache.camel</groupId>
  <artifactId>camel-saxon</artifactId>
  <version>x.x.x</version>
</dependency>

Spring Boot Auto-Configuration

When using saxon with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-saxon-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 11 options, which are listed below.

Name Description Default Type

camel.component.xquery.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.xquery.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.xquery.configuration

To use a custom Saxon configuration. The option is a net.sf.saxon.Configuration type.

Configuration

camel.component.xquery.configuration-properties

To set custom Saxon configuration properties

Map

camel.component.xquery.enabled

Whether to enable auto configuration of the xquery component. This is enabled by default.

Boolean

camel.component.xquery.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.xquery.module-u-r-i-resolver

To use the custom ModuleURIResolver. The option is a net.sf.saxon.lib.ModuleURIResolver type.

ModuleURIResolver

camel.language.xquery.configuration-ref

Reference to a saxon configuration instance in the registry to use for xquery (requires camel-saxon). This may be needed to add custom functions to a saxon configuration, so these custom functions can be used in xquery expressions.

String

camel.language.xquery.enabled

Whether to enable auto configuration of the xquery language. This is enabled by default.

Boolean

camel.language.xquery.trim

Whether to trim the value to remove leading and trailing whitespaces and line breaks

true

Boolean

camel.language.xquery.type

Sets the class name of the result type (type from output) The default result type is NodeSet

String
Back to top