Hazelcast List

Since Camel 2.7

Both producer and consumer are supported

The Hazelcast List component is one of Camel Hazelcast Components which allows you to access Hazelcast distributed list.

Options

The Hazelcast List component supports 5 options, which are listed below.

Name Description Default Type

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

hazelcastInstance (advanced)

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance.

HazelcastInstance

hazelcastMode (advanced)

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

The Hazelcast List endpoint is configured using URI syntax:

hazelcast-list:cacheName

with the following path and query parameters:

Path Parameters (1 parameters):

Name Description Default Type

cacheName

Required The name of the cache

String

Query Parameters (7 parameters):

Name Description Default Type

defaultOperation (common)

To specify a default operation to use, if no operation header has been provided. There are 36 enums and the value can be one of: put, delete, get, update, query, getAll, clear, putIfAbsent, allAll, removeAll, retainAll, evict, evictAll, valueCount, containsKey, containsValue, keySet, removevalue, increment, decrement, setvalue, destroy, compareAndSet, getAndAdd, add, offer, peek, poll, remainingCapacity, drainTo, removeIf, take, publish, readOnceHeal, readOnceTail, capacity

HazelcastOperation

hazelcastInstance (common)

The hazelcast instance reference which can be used for hazelcast endpoint.

HazelcastInstance

hazelcastInstanceName (common)

The hazelcast instance reference name which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance.

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

List producer – to(“hazelcast-list:foo”)

The list producer provides 7 operations: * add * addAll * set * get * removevalue * removeAll * clear

Sample for add:

from("direct:add")
.setHeader(HazelcastConstants.OPERATION, constant(HazelcastOperation.ADD))
.toF("hazelcast-%sbar", HazelcastConstants.LIST_PREFIX);

Sample for get:

from("direct:get")
.setHeader(HazelcastConstants.OPERATION, constant(HazelcastOperation.GET))
.toF("hazelcast-%sbar", HazelcastConstants.LIST_PREFIX)
.to("seda:out");

Sample for setvalue:

from("direct:set")
.setHeader(HazelcastConstants.OPERATION, constant(HazelcastOperation.SET_VALUE))
.toF("hazelcast-%sbar", HazelcastConstants.LIST_PREFIX);

Sample for removevalue:

from("direct:removevalue")
.setHeader(HazelcastConstants.OPERATION, constant(HazelcastOperation.REMOVE_VALUE))
.toF("hazelcast-%sbar", HazelcastConstants.LIST_PREFIX);

Note that CamelHazelcastObjectIndex header is used for indexing purpose.

List consumer – from(“hazelcast-list:foo”)

The list consumer provides 2 operations: * add * remove

fromF("hazelcast-%smm", HazelcastConstants.LIST_PREFIX)
    .log("object...")
    .choice()
        .when(header(HazelcastConstants.LISTENER_ACTION).isEqualTo(HazelcastConstants.ADDED))
            .log("...added")
                        .to("mock:added")
        .when(header(HazelcastConstants.LISTENER_ACTION).isEqualTo(HazelcastConstants.REMOVED))
            .log("...removed")
                        .to("mock:removed")
                .otherwise()
                        .log("fail!");

Spring Boot Auto-Configuration

When using hazelcast with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-hazelcast-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 85 options, which are listed below.

Name Description Default Type

camel.component.hazelcast-atomicvalue.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-atomicvalue.customizer.hazelcast-instance.enabled

Enable or disable the cache-manager customizer.

true

Boolean

camel.component.hazelcast-atomicvalue.customizer.hazelcast-instance.override

Configure if the cache manager eventually set on the component should be overridden by the customizer.

false

Boolean

camel.component.hazelcast-atomicvalue.enabled

Whether to enable auto configuration of the hazelcast-atomicvalue component. This is enabled by default.

Boolean

camel.component.hazelcast-atomicvalue.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-atomicvalue.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-atomicvalue.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-instance.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-instance.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-instance.enabled

Whether to enable auto configuration of the hazelcast-instance component. This is enabled by default.

Boolean

camel.component.hazelcast-instance.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-instance.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-list.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-list.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-list.customizer.hazelcast-instance.enabled

Enable or disable the cache-manager customizer.

true

Boolean

camel.component.hazelcast-list.customizer.hazelcast-instance.override

Configure if the cache manager eventually set on the component should be overridden by the customizer.

false

Boolean

camel.component.hazelcast-list.enabled

Whether to enable auto configuration of the hazelcast-list component. This is enabled by default.

Boolean

camel.component.hazelcast-list.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-list.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-list.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-map.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-map.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-map.customizer.hazelcast-instance.enabled

Enable or disable the cache-manager customizer.

true

Boolean

camel.component.hazelcast-map.customizer.hazelcast-instance.override

Configure if the cache manager eventually set on the component should be overridden by the customizer.

false

Boolean

camel.component.hazelcast-map.enabled

Whether to enable auto configuration of the hazelcast-map component. This is enabled by default.

Boolean

camel.component.hazelcast-map.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-map.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-map.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-multimap.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-multimap.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-multimap.customizer.hazelcast-instance.enabled

Enable or disable the cache-manager customizer.

true

Boolean

camel.component.hazelcast-multimap.customizer.hazelcast-instance.override

Configure if the cache manager eventually set on the component should be overridden by the customizer.

false

Boolean

camel.component.hazelcast-multimap.enabled

Whether to enable auto configuration of the hazelcast-multimap component. This is enabled by default.

Boolean

camel.component.hazelcast-multimap.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-multimap.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-multimap.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-queue.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-queue.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-queue.customizer.hazelcast-instance.enabled

Enable or disable the cache-manager customizer.

true

Boolean

camel.component.hazelcast-queue.customizer.hazelcast-instance.override

Configure if the cache manager eventually set on the component should be overridden by the customizer.

false

Boolean

camel.component.hazelcast-queue.enabled

Whether to enable auto configuration of the hazelcast-queue component. This is enabled by default.

Boolean

camel.component.hazelcast-queue.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-queue.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-queue.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-replicatedmap.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-replicatedmap.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-replicatedmap.customizer.hazelcast-instance.enabled

Enable or disable the cache-manager customizer.

true

Boolean

camel.component.hazelcast-replicatedmap.customizer.hazelcast-instance.override

Configure if the cache manager eventually set on the component should be overridden by the customizer.

false

Boolean

camel.component.hazelcast-replicatedmap.enabled

Whether to enable auto configuration of the hazelcast-replicatedmap component. This is enabled by default.

Boolean

camel.component.hazelcast-replicatedmap.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-replicatedmap.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-replicatedmap.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-ringbuffer.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-ringbuffer.customizer.hazelcast-instance.enabled

Enable or disable the cache-manager customizer.

true

Boolean

camel.component.hazelcast-ringbuffer.customizer.hazelcast-instance.override

Configure if the cache manager eventually set on the component should be overridden by the customizer.

false

Boolean

camel.component.hazelcast-ringbuffer.enabled

Whether to enable auto configuration of the hazelcast-ringbuffer component. This is enabled by default.

Boolean

camel.component.hazelcast-ringbuffer.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-ringbuffer.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-ringbuffer.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-seda.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-seda.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-seda.customizer.hazelcast-instance.enabled

Enable or disable the cache-manager customizer.

true

Boolean

camel.component.hazelcast-seda.customizer.hazelcast-instance.override

Configure if the cache manager eventually set on the component should be overridden by the customizer.

false

Boolean

camel.component.hazelcast-seda.enabled

Whether to enable auto configuration of the hazelcast-seda component. This is enabled by default.

Boolean

camel.component.hazelcast-seda.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-seda.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-seda.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-set.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-set.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-set.customizer.hazelcast-instance.enabled

Enable or disable the cache-manager customizer.

true

Boolean

camel.component.hazelcast-set.customizer.hazelcast-instance.override

Configure if the cache manager eventually set on the component should be overridden by the customizer.

false

Boolean

camel.component.hazelcast-set.enabled

Whether to enable auto configuration of the hazelcast-set component. This is enabled by default.

Boolean

camel.component.hazelcast-set.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-set.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-set.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-topic.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-topic.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-topic.customizer.hazelcast-instance.enabled

Enable or disable the cache-manager customizer.

true

Boolean

camel.component.hazelcast-topic.customizer.hazelcast-instance.enabled

Enable or disable the cache-manager customizer.

true

Boolean

camel.component.hazelcast-topic.customizer.hazelcast-instance.override

Configure if the cache manager eventually set on the component should be overridden by the customizer.

false

Boolean

camel.component.hazelcast-topic.customizer.hazelcast-instance.override

Configure if the cache manager eventually set on the component should be overridden by the customizer.

false

Boolean

camel.component.hazelcast-topic.enabled

Whether to enable auto configuration of the hazelcast-topic component. This is enabled by default.

Boolean

camel.component.hazelcast-topic.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-topic.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-topic.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean
Back to top