Apache Camel helps you integrate over 300 different systems!

URI format

undertow:http://hostname[:port][/resourceUri][?options]
undertow:https://hostname[:port][/resourceUri][?options]
undertow:ws://hostname[:port][/resourceUri][?options]
undertow:wss://hostname[:port][/resourceUri][?options]

You can append query options to the URI in the following format, ?option=value&option=value&…

Options

The Undertow component supports 11 options, which are listed below.

Name	Description	Default	Type
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
muteException (consumer)	If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.	false	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
hostOptions (advanced)	To configure common options, such as thread pools		UndertowHostOptions
undertowHttpBinding (advanced)	To use a custom HttpBinding to control the mapping between Camel message and HttpClient.		UndertowHttpBinding
allowedRoles (security)	Configuration used by UndertowSecurityProvider. Comma separated list of allowed roles.		String
securityConfiguration (security)	Configuration used by UndertowSecurityProvider. Security configuration object for use from UndertowSecurityProvider. Configuration is UndertowSecurityProvider specific. Each provider decides, whether it accepts configuration.		Object
securityProvider (security)	Security provider allows plug in the provider, which will be used to secure requests. SPI approach could be used too (component then finds security provider using SPI).		UndertowSecurityProvider
sslContextParameters (security)	To configure security using SSLContextParameters		SSLContextParameters
useGlobalSslContextParameters (security)	Enable usage of global SSL context parameters.	false	boolean

Name

Description

Default

Type

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

muteException (consumer)

If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

hostOptions (advanced)

To configure common options, such as thread pools

UndertowHostOptions

undertowHttpBinding (advanced)

To use a custom HttpBinding to control the mapping between Camel message and HttpClient.

UndertowHttpBinding

allowedRoles (security)

Configuration used by UndertowSecurityProvider. Comma separated list of allowed roles.

String

securityConfiguration (security)

Configuration used by UndertowSecurityProvider. Security configuration object for use from UndertowSecurityProvider. Configuration is UndertowSecurityProvider specific. Each provider decides, whether it accepts configuration.

Object

securityProvider (security)

Security provider allows plug in the provider, which will be used to secure requests. SPI approach could be used too (component then finds security provider using SPI).

UndertowSecurityProvider

sslContextParameters (security)

To configure security using SSLContextParameters

SSLContextParameters

useGlobalSslContextParameters (security)

Enable usage of global SSL context parameters.

false

boolean

The Undertow endpoint is configured using URI syntax:

undertow:httpURI

with the following path and query parameters:

Path Parameters (1 parameters):

Name	Description	Default	Type
httpURI	Required The url of the HTTP endpoint to use.		URI

Name

Description

Default

Type

httpURI

Required The url of the HTTP endpoint to use.

URI

Query Parameters (29 parameters):

Name	Description	Default	Type
useStreaming (common)	For HTTP endpoint: if true, text and binary messages will be wrapped as java.io.InputStream before they are passed to an Exchange; otherwise they will be passed as byte. For WebSocket endpoint: if true, text and binary messages will be wrapped as java.io.Reader and java.io.InputStream respectively before they are passed to an Exchange; otherwise they will be passed as String and byte respectively.	false	boolean
accessLog (consumer)	Whether or not the consumer should write access log	false	Boolean
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
httpMethodRestrict (consumer)	Used to only allow consuming if the HttpMethod matches, such as GET/POST/PUT etc. Multiple methods can be specified separated by comma.		String
matchOnUriPrefix (consumer)	Whether or not the consumer should try to find a target consumer by matching the URI prefix if no exact match is found.	false	Boolean
muteException (consumer)	If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.	false	Boolean
optionsEnabled (consumer)	Specifies whether to enable HTTP OPTIONS for this Servlet consumer. By default OPTIONS is turned off.	false	boolean
exceptionHandler (consumer)	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer)	Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut		ExchangePattern
handlers (consumer)	Specifies a comma-delimited set of io.undertow.server.HttpHandler instances to lookup in your Registry. These handlers are added to the Undertow handler chain (for example, to add security). Important: You can not use different handlers with different Undertow endpoints using the same port number. The handlers is associated to the port number. If you need different handlers, then use different port numbers.		String
cookieHandler (producer)	Configure a cookie handler to maintain a HTTP session		CookieHandler
keepAlive (producer)	Setting to ensure socket is not closed due to inactivity	true	Boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
options (producer)	Sets additional channel options. The options that can be used are defined in org.xnio.Options. To configure from endpoint uri, then prefix each option with option., such as option.close-abort=true&option.send-buffer=8192		Map
preserveHostHeader (producer)	If the option is true, UndertowProducer will set the Host header to the value contained in the current exchange Host header, useful in reverse proxy applications where you want the Host header received by the downstream server to reflect the URL called by the upstream client, this allows applications which use the Host header to generate accurate URL’s for a proxied service.	true	boolean
reuseAddresses (producer)	Setting to facilitate socket multiplexing	true	Boolean
tcpNoDelay (producer)	Setting to improve TCP protocol performance	true	Boolean
throwExceptionOnFailure (producer)	Option to disable throwing the HttpOperationFailedException in case of failed responses from the remote server. This allows you to get all responses regardless of the HTTP status code.	true	Boolean
transferException (producer)	If enabled and an Exchange failed processing on the consumer side and if the caused Exception was send back serialized in the response as a application/x-java-serialized-object content type. On the producer side the exception will be deserialized and thrown as is instead of the HttpOperationFailedException. The caused exception is required to be serialized. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.	false	Boolean
accessLogReceiver (advanced)	Which Undertow AccessLogReceiver should be used Will use JBossLoggingAccessLogReceiver if not specified		AccessLogReceiver
headerFilterStrategy (advanced)	To use a custom HeaderFilterStrategy to filter header to and from Camel message.		HeaderFilterStrategy
undertowHttpBinding (advanced)	To use a custom UndertowHttpBinding to control the mapping between Camel message and undertow.		UndertowHttpBinding
allowedRoles (security)	Configuration used by UndertowSecurityProvider. Comma separated list of allowed roles.		String
securityConfiguration (security)	OConfiguration used by UndertowSecurityProvider. Security configuration object for use from UndertowSecurityProvider. Configuration is UndertowSecurityProvider specific. Each provider decides whether accepts configuration.		Object
securityProvider (security)	Security provider allows plug in the provider, which will be used to secure requests. SPI approach could be used too (endpoint then finds security provider using SPI).		UndertowSecurityProvider
sslContextParameters (security)	To configure security using SSLContextParameters		SSLContextParameters
fireWebSocketChannelEvents (websocket)	if true, the consumer will post notifications to the route when a new WebSocket peer connects, disconnects, etc. See UndertowConstants.EVENT_TYPE and EventType.	false	boolean
sendTimeout (websocket)	Timeout in milliseconds when sending to a websocket channel. The default timeout is 30000 (30 seconds).	30000	Integer
sendToAll (websocket)	To send to all websocket subscribers. Can be used to configure on endpoint level, instead of having to use the UndertowConstants.SEND_TO_ALL header on the message.		Boolean

Name

Description

Default

Type

useStreaming (common)

For HTTP endpoint: if true, text and binary messages will be wrapped as java.io.InputStream before they are passed to an Exchange; otherwise they will be passed as byte. For WebSocket endpoint: if true, text and binary messages will be wrapped as java.io.Reader and java.io.InputStream respectively before they are passed to an Exchange; otherwise they will be passed as String and byte respectively.

false

boolean

accessLog (consumer)

Whether or not the consumer should write access log

false

Boolean

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

httpMethodRestrict (consumer)

Used to only allow consuming if the HttpMethod matches, such as GET/POST/PUT etc. Multiple methods can be specified separated by comma.

String

matchOnUriPrefix (consumer)

Whether or not the consumer should try to find a target consumer by matching the URI prefix if no exact match is found.

false

Boolean

muteException (consumer)

If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.

false

Boolean

optionsEnabled (consumer)

Specifies whether to enable HTTP OPTIONS for this Servlet consumer. By default OPTIONS is turned off.

false

boolean

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

handlers (consumer)

Specifies a comma-delimited set of io.undertow.server.HttpHandler instances to lookup in your Registry. These handlers are added to the Undertow handler chain (for example, to add security). Important: You can not use different handlers with different Undertow endpoints using the same port number. The handlers is associated to the port number. If you need different handlers, then use different port numbers.

String

cookieHandler (producer)

Configure a cookie handler to maintain a HTTP session

CookieHandler

keepAlive (producer)

Setting to ensure socket is not closed due to inactivity

true

Boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

options (producer)

Sets additional channel options. The options that can be used are defined in org.xnio.Options. To configure from endpoint uri, then prefix each option with option., such as option.close-abort=true&option.send-buffer=8192

Map

preserveHostHeader (producer)

If the option is true, UndertowProducer will set the Host header to the value contained in the current exchange Host header, useful in reverse proxy applications where you want the Host header received by the downstream server to reflect the URL called by the upstream client, this allows applications which use the Host header to generate accurate URL’s for a proxied service.

true

boolean

reuseAddresses (producer)

Setting to facilitate socket multiplexing

true

Boolean

tcpNoDelay (producer)

Setting to improve TCP protocol performance

true

Boolean

throwExceptionOnFailure (producer)

Option to disable throwing the HttpOperationFailedException in case of failed responses from the remote server. This allows you to get all responses regardless of the HTTP status code.

true

Boolean

transferException (producer)

If enabled and an Exchange failed processing on the consumer side and if the caused Exception was send back serialized in the response as a application/x-java-serialized-object content type. On the producer side the exception will be deserialized and thrown as is instead of the HttpOperationFailedException. The caused exception is required to be serialized. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.

false

Boolean

accessLogReceiver (advanced)

Which Undertow AccessLogReceiver should be used Will use JBossLoggingAccessLogReceiver if not specified

AccessLogReceiver

headerFilterStrategy (advanced)

To use a custom HeaderFilterStrategy to filter header to and from Camel message.

HeaderFilterStrategy

undertowHttpBinding (advanced)

To use a custom UndertowHttpBinding to control the mapping between Camel message and undertow.

UndertowHttpBinding

allowedRoles (security)

Configuration used by UndertowSecurityProvider. Comma separated list of allowed roles.

String

securityConfiguration (security)

OConfiguration used by UndertowSecurityProvider. Security configuration object for use from UndertowSecurityProvider. Configuration is UndertowSecurityProvider specific. Each provider decides whether accepts configuration.

Object

securityProvider (security)

Security provider allows plug in the provider, which will be used to secure requests. SPI approach could be used too (endpoint then finds security provider using SPI).

UndertowSecurityProvider

sslContextParameters (security)

To configure security using SSLContextParameters

SSLContextParameters

fireWebSocketChannelEvents (websocket)

if true, the consumer will post notifications to the route when a new WebSocket peer connects, disconnects, etc. See UndertowConstants.EVENT_TYPE and EventType.

false

boolean

sendTimeout (websocket)

Timeout in milliseconds when sending to a websocket channel. The default timeout is 30000 (30 seconds).

30000

Integer

sendToAll (websocket)

To send to all websocket subscribers. Can be used to configure on endpoint level, instead of having to use the UndertowConstants.SEND_TO_ALL header on the message.

Boolean

Message Headers

Camel uses the same message headers as the HTTP component. It also uses Exchange.HTTP_CHUNKED,CamelHttpChunked header to turn on or turn off the chunked encoding on the camel-undertow consumer.

Camel also populates all request.parameter and request.headers. For example, given a client request with the URL, http://myserver/myserver?orderid=123, the exchange will contain a header named orderid with the value 123.

HTTP Producer Example

The following is a basic example of how to send an HTTP request to an existing HTTP endpoint.

in Java DSL

from("direct:start")
    .to("undertow:http://www.google.com");

or in XML

<route>
    <from uri="direct:start"/>
    <to uri="undertow:http://www.google.com"/>
<route>

HTTP Consumer Example

In this sample we define a route that exposes a HTTP service at http://localhost:8080/myapp/myservice:

<route>
  <from uri="undertow:http://localhost:8080/myapp/myservice"/>
  <to uri="bean:myBean"/>
</route>

WebSocket Example

In this sample we define a route that exposes a WebSocket service at http://localhost:8080/myapp/mysocket and returns back a response to the same channel:

<route>
  <from uri="undertow:ws://localhost:8080/myapp/mysocket"/>
  <transform><simple>Echo ${body}</simple></transform>
  <to uri="undertow:ws://localhost:8080/myapp/mysocket"/>
</route>

Using localhost as host

When you specify localhost in a URL, Camel exposes the endpoint only on the local TCP/IP network interface, so it cannot be accessed from outside the machine it operates on.

If you need to expose an Undertow endpoint on a specific network interface, the numerical IP address of this interface should be used as the host. If you need to expose an Undertow endpoint on all network interfaces, the 0.0.0.0 address should be used.

To listen across an entire URI prefix, see How do I let Jetty match wildcards.

If you actually want to expose routes by HTTP and already have a Servlet, you should instead refer to the Servlet Transport.

Security provider

To plugin security provider for endpoint authentication, implement SPI interface org.apache.camel.component.undertow.spi.UndertowSecurityProvider.

Undertow components locates all implementations of UndertowSecurityProvider using Java SPI (Service Provider Interfaces). If there is an object passed to component as parameter securityConfiguration and provider accepts it. Provider will be used for authentication of all requests.

Property requireServletContext of security providers forces udertow server to start with servlet context. There will be no servlet actually handled. This feature is meant only for use with servlet filters, which needs servlet context for their functionality.

Spring Boot Auto-Configuration

When using undertow with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-undertow-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 12 options, which are listed below.

Name	Description	Default	Type
camel.component.undertow.allowed-roles	Configuration used by UndertowSecurityProvider. Comma separated list of allowed roles.		String
camel.component.undertow.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.undertow.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.undertow.enabled	Whether to enable auto configuration of the undertow component. This is enabled by default.		Boolean
camel.component.undertow.host-options	To configure common options, such as thread pools. The option is a org.apache.camel.component.undertow.UndertowHostOptions type.		UndertowHostOptions
camel.component.undertow.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.undertow.mute-exception	If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.	false	Boolean
camel.component.undertow.security-configuration	Configuration used by UndertowSecurityProvider. Security configuration object for use from UndertowSecurityProvider. Configuration is UndertowSecurityProvider specific. Each provider decides, whether it accepts configuration. The option is a java.lang.Object type.		Object
camel.component.undertow.security-provider	Security provider allows plug in the provider, which will be used to secure requests. SPI approach could be used too (component then finds security provider using SPI). The option is a org.apache.camel.component.undertow.spi.UndertowSecurityProvider type.		UndertowSecurityProvider
camel.component.undertow.ssl-context-parameters	To configure security using SSLContextParameters. The option is a org.apache.camel.support.jsse.SSLContextParameters type.		SSLContextParameters
camel.component.undertow.undertow-http-binding	To use a custom HttpBinding to control the mapping between Camel message and HttpClient. The option is a org.apache.camel.component.undertow.UndertowHttpBinding type.		UndertowHttpBinding
camel.component.undertow.use-global-ssl-context-parameters	Enable usage of global SSL context parameters.	false	Boolean

Name

Description

Default

Type

camel.component.undertow.allowed-roles

Configuration used by UndertowSecurityProvider. Comma separated list of allowed roles.

String

camel.component.undertow.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.undertow.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.undertow.enabled

Whether to enable auto configuration of the undertow component. This is enabled by default.

Boolean

camel.component.undertow.host-options

To configure common options, such as thread pools. The option is a org.apache.camel.component.undertow.UndertowHostOptions type.

UndertowHostOptions

camel.component.undertow.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.undertow.mute-exception

If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.

false

Boolean

camel.component.undertow.security-configuration

Configuration used by UndertowSecurityProvider. Security configuration object for use from UndertowSecurityProvider. Configuration is UndertowSecurityProvider specific. Each provider decides, whether it accepts configuration. The option is a java.lang.Object type.

Object

camel.component.undertow.security-provider

Security provider allows plug in the provider, which will be used to secure requests. SPI approach could be used too (component then finds security provider using SPI). The option is a org.apache.camel.component.undertow.spi.UndertowSecurityProvider type.

UndertowSecurityProvider

camel.component.undertow.ssl-context-parameters

To configure security using SSLContextParameters. The option is a org.apache.camel.support.jsse.SSLContextParameters type.

SSLContextParameters

camel.component.undertow.undertow-http-binding

To use a custom HttpBinding to control the mapping between Camel message and HttpClient. The option is a org.apache.camel.component.undertow.UndertowHttpBinding type.

UndertowHttpBinding

camel.component.undertow.use-global-ssl-context-parameters

Enable usage of global SSL context parameters.

false

Boolean