Apache Camel helps you integrate over 300 different systems!

Configuring Options

Camel components are configured on two separate levels:

component level
endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The Atmos component supports 7 options, which are listed below.

Name	Description	Default	Type
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.		boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.		boolean
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
uri (advanced)	The URI of the server for the Atmos client to connect to.		String
fullTokenId (security)	The token id to pass to the Atmos client.		String
secretKey (security)	The secret key to pass to the Atmos client (should be base64 encoded).		String
sslValidation (security)	Whether the Atmos client should perform SSL validation.		boolean

Name

Description

Default

Type

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

uri (advanced)

The URI of the server for the Atmos client to connect to.

String

fullTokenId (security)

The token id to pass to the Atmos client.

String

secretKey (security)

The secret key to pass to the Atmos client (should be base64 encoded).

String

sslValidation (security)

Whether the Atmos client should perform SSL validation.

boolean

Endpoint Options

The Atmos endpoint is configured using URI syntax:

atmos:name/operation

with the following path and query parameters:

Path Parameters (2 parameters)

Name	Description	Default	Type
name (common)	Atmos name.		String
operation (common)	Required Operation to perform. Enum values: put del search get move		AtmosOperation

Name

Description

Default

Type

name (common)

Atmos name.

String

operation (common)

Required Operation to perform.

Enum values:

put
del
search
get
move

AtmosOperation

Query Parameters (12 parameters)

Name	Description	Type
localPath (common)	Local path to put files.	String
newRemotePath (common)	New path on Atmos when moving files.	String
query (common)	Search query on Atmos.	String
remotePath (common)	Where to put files on Atmos.	String
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	boolean
exceptionHandler (consumer (advanced))	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.	ExceptionHandler
exchangePattern (consumer (advanced))	Sets the exchange pattern when the consumer creates an exchange. Enum values: InOnly InOut InOptionalOut	ExchangePattern
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	boolean
uri (advanced)	Atomos server uri.	String
fullTokenId (security)	Atmos client fullTokenId.	String
secretKey (security)	The secret key to pass to the Atmos client (should be base64 encoded).	String
sslValidation (security)	Atmos SSL validation.	boolean

Name

Description

Default

Type

localPath (common)

Local path to put files.

String

newRemotePath (common)

New path on Atmos when moving files.

String

query (common)

Search query on Atmos.

String

remotePath (common)

Where to put files on Atmos.

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

InOnly
InOut
InOptionalOut

ExchangePattern

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

uri (advanced)

Atomos server uri.

String

fullTokenId (security)

Atmos client fullTokenId.

String

secretKey (security)

The secret key to pass to the Atmos client (should be base64 encoded).

String

sslValidation (security)

Atmos SSL validation.

boolean

Dependencies

To use Atmos in your camel routes you need to add the dependency on camel-atmos which implements this data format.

If you use maven you could just add the following to your pom.xml, substituting the version number for the latest & greatest release (see the download page for the latest versions).

<dependency>
  <groupId>org.apache.camel</groupId>
  <artifactId>camel-atmos</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

Integrations

When you look at atmos integrations, there is one type of consumer, GetConsumer, which is a type of ScheduledPollConsumer.

Get

Whereas there are 4 types of producers which are

Get
Del
Move
Put

Operations

Regarding the operations, the following headers are set on camel exchange

DOWNLOADED_FILE, DOWNLOADED_FILES, UPLOADED_FILE, UPLOADED_FILES, FOUND_FILES, DELETED_PATH, MOVED_PATH

Examples

Consumer Example

from("atmos:foo/get?remotePath=/path")
  .to("mock:test");

remotePath represents the path from where the data will be read and passes the camel exchange to regarding producer Underneath, this component uses Atmos client API for this and every other operations.

Producer Example

from("direct:start")
  .to("atmos://get?remotePath=/dummy/dummy.txt")

remotePath represents the path where the operations occur on ViPR object data service. In producers, operations(Get,Del, Move,Put) run on ViPR object data services and results are set on headers of camel exchange.

Spring Boot Auto-Configuration

When using atmos with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-atmos-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 8 options, which are listed below.

Name	Description	Default	Type
camel.component.atmos.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.atmos.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.atmos.enabled	Whether to enable auto configuration of the atmos component. This is enabled by default.		Boolean
camel.component.atmos.full-token-id	The token id to pass to the Atmos client		String
camel.component.atmos.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.atmos.secret-key	The secret key to pass to the Atmos client (should be base64 encoded)		String
camel.component.atmos.ssl-validation	Whether the Atmos client should perform SSL validation	false	Boolean
camel.component.atmos.uri	The URI of the server for the Atmos client to connect to		String

Name

Description

Default

Type

camel.component.atmos.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.atmos.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.atmos.enabled

Whether to enable auto configuration of the atmos component. This is enabled by default.

Boolean

camel.component.atmos.full-token-id

The token id to pass to the Atmos client

String

camel.component.atmos.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.atmos.secret-key

The secret key to pass to the Atmos client (should be base64 encoded)

String

camel.component.atmos.ssl-validation

Whether the Atmos client should perform SSL validation

false

Boolean

camel.component.atmos.uri

The URI of the server for the Atmos client to connect to

String