AWS Secrets Manager

Since Camel 3.9

Only producer is supported

The AWS Secrets Manager component supports list secret AWS Secrets Manager service.

Prerequisites

You must have a valid Amazon Web Services developer account, and be signed up to use Amazon Secrets Manager. More information is available at AWS Secrets Manager.

URI Format

aws-secrets-manager://label[?options]

You can append query options to the URI in the following format, ?options=value&option2=value&…​

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The AWS Secrets Manager component supports 17 options, which are listed below.

Name Description Default Type

binaryPayload (producer)

Set if the secret is binary or not.

boolean

configuration (producer)

Component configuration.

SecretsManagerConfiguration

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

operation (producer)

Required The operation to perform.

Enum values:

  • listSecrets

  • createSecret

  • getSecret

  • describeSecret

  • deleteSecret

  • rotateSecret

  • updateSecret

  • restoreSecret

  • replicateSecretToRegions

SecretsManagerOperations

overrideEndpoint (producer)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

boolean

pojoRequest (producer)

If we want to use a POJO request as body or not.

boolean

proxyHost (producer)

To define a proxy host when instantiating the Secrets Manager client.

String

proxyPort (producer)

To define a proxy port when instantiating the Secrets Manager client.

Integer

proxyProtocol (producer)

To define a proxy protocol when instantiating the Secrets Manager client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

region (producer)

The region in which Secrets Manager client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

secretsManagerClient (producer)

Autowired To use a existing configured AWS Secrets Manager as client.

SecretsManagerClient

trustAllCertificates (producer)

If we want to trust all certificates in case of overriding the endpoint.

boolean

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

useDefaultCredentialsProvider (producer)

Set whether the Translate client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

accessKey (security)

Amazon AWS Access Key.

String

secretKey (security)

Amazon AWS Secret Key.

String

Endpoint Options

The AWS Secrets Manager endpoint is configured using URI syntax:

aws-secrets-manager://label

with the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

label (producer)

Required Logical name.

String

Query Parameters (15 parameters)

Name Description Default Type

binaryPayload (producer)

Set if the secret is binary or not.

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

operation (producer)

Required The operation to perform.

Enum values:

  • listSecrets

  • createSecret

  • getSecret

  • describeSecret

  • deleteSecret

  • rotateSecret

  • updateSecret

  • restoreSecret

  • replicateSecretToRegions

SecretsManagerOperations

overrideEndpoint (producer)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

boolean

pojoRequest (producer)

If we want to use a POJO request as body or not.

boolean

proxyHost (producer)

To define a proxy host when instantiating the Secrets Manager client.

String

proxyPort (producer)

To define a proxy port when instantiating the Secrets Manager client.

Integer

proxyProtocol (producer)

To define a proxy protocol when instantiating the Secrets Manager client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

region (producer)

The region in which Secrets Manager client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

secretsManagerClient (producer)

Autowired To use a existing configured AWS Secrets Manager as client.

SecretsManagerClient

trustAllCertificates (producer)

If we want to trust all certificates in case of overriding the endpoint.

boolean

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

useDefaultCredentialsProvider (producer)

Set whether the Translate client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

boolean

accessKey (security)

Amazon AWS Access Key.

String

secretKey (security)

Amazon AWS Secret Key.

String

Secrets Manager Producer operations

Camel-AWS-Secrets-manager component provides the following operation on the producer side:

  • listSecrets

  • createSecret

  • deleteSecret

  • describeSecret

  • rotateSecret

  • getSecret

  • updateSecret

  • replicateSecretToRegions

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws-secrets-manager</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Spring Boot Auto-Configuration

When using aws-secrets-manager with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws-secrets-manager-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 18 options, which are listed below.

Name Description Default Type

camel.component.aws-secrets-manager.access-key

Amazon AWS Access Key

String

camel.component.aws-secrets-manager.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws-secrets-manager.binary-payload

Set if the secret is binary or not

false

Boolean

camel.component.aws-secrets-manager.configuration

Component configuration. The option is a org.apache.camel.component.aws.secretsmanager.SecretsManagerConfiguration type.

SecretsManagerConfiguration

camel.component.aws-secrets-manager.enabled

Whether to enable auto configuration of the aws-secrets-manager component. This is enabled by default.

Boolean

camel.component.aws-secrets-manager.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws-secrets-manager.operation

The operation to perform

SecretsManagerOperations

camel.component.aws-secrets-manager.override-endpoint

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option

false

Boolean

camel.component.aws-secrets-manager.pojo-request

If we want to use a POJO request as body or not

false

Boolean

camel.component.aws-secrets-manager.proxy-host

To define a proxy host when instantiating the Secrets Manager client

String

camel.component.aws-secrets-manager.proxy-port

To define a proxy port when instantiating the Secrets Manager client

Integer

camel.component.aws-secrets-manager.proxy-protocol

To define a proxy protocol when instantiating the Secrets Manager client

Protocol

camel.component.aws-secrets-manager.region

The region in which Secrets Manager client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id()

String

camel.component.aws-secrets-manager.secret-key

Amazon AWS Secret Key

String

camel.component.aws-secrets-manager.secrets-manager-client

To use a existing configured AWS Secrets Manager as client. The option is a software.amazon.awssdk.services.secretsmanager.SecretsManagerClient type.

SecretsManagerClient

camel.component.aws-secrets-manager.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint

false

Boolean

camel.component.aws-secrets-manager.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option

String

camel.component.aws-secrets-manager.use-default-credentials-provider

Set whether the Translate client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

Boolean
Back to top