AWS CloudWatch

Since Camel 3.1

Only producer is supported

The AWS2 Cloudwatch component allows messages to be sent to an Amazon CloudWatch metrics. The implementation of the Amazon API is provided by the AWS SDK.

Prerequisites

You must have a valid Amazon Web Services developer account, and be signed up to use Amazon CloudWatch. More information is available at Amazon CloudWatch.

URI Format

aws2-cw://namespace[?options]

The metrics will be created if they don’t already exists.
You can append query options to the URI in the following format, ?options=value&option2=value&…​

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The AWS CloudWatch component supports 18 options, which are listed below.

Name Description Default Type

amazonCwClient (producer)

Autowired To use the AmazonCloudWatch as the client.

CloudWatchClient

configuration (producer)

The component configuration.

Cw2Configuration

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

name (producer)

The metric name.

String

overrideEndpoint (producer)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

boolean

proxyHost (producer)

To define a proxy host when instantiating the CW client.

String

proxyPort (producer)

To define a proxy port when instantiating the CW client.

Integer

proxyProtocol (producer)

To define a proxy protocol when instantiating the CW client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

region (producer)

The region in which CW client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

timestamp (producer)

The metric timestamp.

Instant

trustAllCertificates (producer)

If we want to trust all certificates in case of overriding the endpoint.

boolean

unit (producer)

The metric unit.

String

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

useDefaultCredentialsProvider (producer)

Set whether the S3 client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

boolean

value (producer)

The metric value.

Double

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

accessKey (security)

Amazon AWS Access Key.

String

secretKey (security)

Amazon AWS Secret Key.

String

Endpoint Options

The AWS CloudWatch endpoint is configured using URI syntax:

aws2-cw:namespace

with the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

namespace (producer)

Required The metric namespace.

String

Query Parameters (16 parameters)

Name Description Default Type

amazonCwClient (producer)

Autowired To use the AmazonCloudWatch as the client.

CloudWatchClient

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

name (producer)

The metric name.

String

overrideEndpoint (producer)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

boolean

proxyHost (producer)

To define a proxy host when instantiating the CW client.

String

proxyPort (producer)

To define a proxy port when instantiating the CW client.

Integer

proxyProtocol (producer)

To define a proxy protocol when instantiating the CW client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

region (producer)

The region in which CW client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

timestamp (producer)

The metric timestamp.

Instant

trustAllCertificates (producer)

If we want to trust all certificates in case of overriding the endpoint.

boolean

unit (producer)

The metric unit.

String

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

useDefaultCredentialsProvider (producer)

Set whether the S3 client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

boolean

value (producer)

The metric value.

Double

accessKey (security)

Amazon AWS Access Key.

String

secretKey (security)

Amazon AWS Secret Key.

String

Required CW component options

You have to provide the amazonCwClient in the Registry or your accessKey and secretKey to access the Amazon’s CloudWatch.

Usage

Static credentials vs Default Credential Provider

You have the possibility of avoiding the usage of explicit static credentials, by specifying the useDefaultCredentialsProvider option and set it to true.

  • Java system properties - aws.accessKeyId and aws.secretKey

  • Environment variables - AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY.

  • Web Identity Token from AWS STS.

  • The shared credentials and config files.

  • Amazon ECS container credentials - loaded from the Amazon ECS if the environment variable AWS_CONTAINER_CREDENTIALS_RELATIVE_URI is set.

  • Amazon EC2 Instance profile credentials.

For more information about this you can look at AWS credentials documentation

Message headers evaluated by the CW producer

Header Type Description

CamelAwsCwMetricName

String

The Amazon CW metric name.

CamelAwsCwMetricValue

Double

The Amazon CW metric value.

CamelAwsCwMetricUnit

String

The Amazon CW metric unit.

CamelAwsCwMetricNamespace

String

The Amazon CW metric namespace.

CamelAwsCwMetricTimestamp

Date

The Amazon CW metric timestamp.

CamelAwsCwMetricDimensionName

String

The Amazon CW metric dimension name.

CamelAwsCwMetricDimensionValue

String

The Amazon CW metric dimension value.

CamelAwsCwMetricDimensions

Map<String, String>

A map of dimension names and dimension values.

Advanced CloudWatchClient configuration

If you need more control over the CloudWatchClient instance configuration you can create your own instance and refer to it from the URI:

from("direct:start")
.to("aws2-cw://namespace?amazonCwClient=#client");

The #client refers to a CloudWatchClient in the Registry.

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws2-cw</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Examples

Producer Example

from("direct:start")
  .to("aws2-cw://http://camel.apache.org/aws-cw");

and sends something like

exchange.getIn().setHeader(Cw2Constants.METRIC_NAME, "ExchangesCompleted");
exchange.getIn().setHeader(Cw2Constants.METRIC_VALUE, "2.0");
exchange.getIn().setHeader(Cw2Constants.METRIC_UNIT, "Count");

Spring Boot Auto-Configuration

When using aws2-cw with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws2-cw-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 19 options, which are listed below.

Name Description Default Type

camel.component.aws2-cw.access-key

Amazon AWS Access Key

String

camel.component.aws2-cw.amazon-cw-client

To use the AmazonCloudWatch as the client. The option is a software.amazon.awssdk.services.cloudwatch.CloudWatchClient type.

CloudWatchClient

camel.component.aws2-cw.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws2-cw.configuration

The component configuration. The option is a org.apache.camel.component.aws2.cw.Cw2Configuration type.

Cw2Configuration

camel.component.aws2-cw.enabled

Whether to enable auto configuration of the aws2-cw component. This is enabled by default.

Boolean

camel.component.aws2-cw.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws2-cw.name

The metric name

String

camel.component.aws2-cw.override-endpoint

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option

false

Boolean

camel.component.aws2-cw.proxy-host

To define a proxy host when instantiating the CW client

String

camel.component.aws2-cw.proxy-port

To define a proxy port when instantiating the CW client

Integer

camel.component.aws2-cw.proxy-protocol

To define a proxy protocol when instantiating the CW client

Protocol

camel.component.aws2-cw.region

The region in which CW client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id()

String

camel.component.aws2-cw.secret-key

Amazon AWS Secret Key

String

camel.component.aws2-cw.timestamp

The metric timestamp. The option is a java.time.Instant type.

Instant

camel.component.aws2-cw.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint

false

Boolean

camel.component.aws2-cw.unit

The metric unit

String

camel.component.aws2-cw.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option

String

camel.component.aws2-cw.use-default-credentials-provider

Set whether the S3 client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

Boolean

camel.component.aws2-cw.value

The metric value

Double
Back to top