Atmosphere Websocket

Since Camel 2.14

Both producer and consumer are supported

The Atmosphere-Websocket component provides Websocket based endpoints for a servlet communicating with external clients over Websocket (as a servlet accepting websocket connections from external clients).
The component uses the SERVLET component and uses the Atmosphere library to support the Websocket transport in various Servlet containers (e..g., Jetty, Tomcat, …​).

Unlike the Websocket component that starts the embedded Jetty server, this component uses the servlet provider of the container.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-atmosphere-websocket</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The Atmosphere Websocket component supports 11 options, which are listed below.

Name Description Default Type

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

boolean

servletName (consumer)

Default name of servlet to use. The default name is CamelServlet.

CamelServlet

String

attachmentMultipartBinding (consumer (advanced))

Whether to automatic bind multipart/form-data as attachments on the Camel Exchange. The options attachmentMultipartBinding=true and disableStreamCache=false cannot work together. Remove disableStreamCache to use AttachmentMultipartBinding. This is turn off by default as this may require servlet specific configuration to enable this when using Servlet’s.

boolean

fileNameExtWhitelist (consumer (advanced))

Whitelist of accepted filename extensions for accepting uploaded files. Multiple extensions can be separated by comma, such as txt,xml.

String

httpRegistry (consumer (advanced))

To use a custom org.apache.camel.component.servlet.HttpRegistry.

HttpRegistry

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

allowJavaSerializedObject (advanced)

Whether to allow java serialization when a request uses context-type=application/x-java-serialized-object. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

httpBinding (advanced)

To use a custom HttpBinding to control the mapping between Camel message and HttpClient.

HttpBinding

httpConfiguration (advanced)

To use the shared HttpConfiguration as base configuration.

HttpConfiguration

headerFilterStrategy (filter)

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message.

HeaderFilterStrategy

Endpoint Options

The Atmosphere Websocket endpoint is configured using URI syntax:

atmosphere-websocket:servicePath

with the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

servicePath (common)

Required Name of websocket endpoint.

String

Query Parameters (26 parameters)

Name Description Default Type

chunked (common)

If this option is false the Servlet will disable the HTTP streaming and set the content-length header on the response.

true

boolean

disableStreamCache (common)

Determines whether or not the raw input stream from Servlet is cached or not (Camel will read the stream into a in memory/overflow to file, Stream caching) cache. By default Camel will cache the Servlet input stream to support reading it multiple times to ensure it Camel can retrieve all data from the stream. However you can set this option to true when you for example need to access the raw stream, such as streaming it directly to a file or other persistent store. DefaultHttpBinding will copy the request input stream into a stream cache and put it into message body if this option is false to support reading the stream multiple times. If you use Servlet to bridge/proxy an endpoint then consider enabling this option to improve performance, in case you do not need to read the message payload multiple times. The http producer will by default cache the response body stream. If setting this option to true, then the producers will not cache the response body stream but use the response stream as-is as the message body.

boolean

headerFilterStrategy (common)

To use a custom HeaderFilterStrategy to filter header to and from Camel message.

HeaderFilterStrategy

sendToAll (common)

Whether to send to all (broadcast) or send to a single receiver.

boolean

transferException (common)

If enabled and an Exchange failed processing on the consumer side, and if the caused Exception was send back serialized in the response as a application/x-java-serialized-object content type. On the producer side the exception will be deserialized and thrown as is, instead of the HttpOperationFailedException. The caused exception is required to be serialized. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.

boolean

useStreaming (common)

To enable streaming to send data as multiple text fragments.

boolean

httpBinding (common (advanced))

To use a custom HttpBinding to control the mapping between Camel message and HttpClient.

HttpBinding

async (consumer)

Configure the consumer to work in async mode.

boolean

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

boolean

httpMethodRestrict (consumer)

Used to only allow consuming if the HttpMethod matches, such as GET/POST/PUT etc. Multiple methods can be specified separated by comma.

String

matchOnUriPrefix (consumer)

Whether or not the consumer should try to find a target consumer by matching the URI prefix if no exact match is found.

boolean

muteException (consumer)

If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.

boolean

responseBufferSize (consumer)

To use a custom buffer size on the javax.servlet.ServletResponse.

Integer

servletName (consumer)

Name of the servlet to use.

CamelServlet

String

attachmentMultipartBinding (consumer (advanced))

Whether to automatic bind multipart/form-data as attachments on the Camel Exchange. The options attachmentMultipartBinding=true and disableStreamCache=false cannot work together. Remove disableStreamCache to use AttachmentMultipartBinding. This is turn off by default as this may require servlet specific configuration to enable this when using Servlet’s.

boolean

eagerCheckContentAvailable (consumer (advanced))

Whether to eager check whether the HTTP requests has content if the content-length header is 0 or not present. This can be turned on in case HTTP clients do not send streamed data.

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

  • InOptionalOut

ExchangePattern

fileNameExtWhitelist (consumer (advanced))

Whitelist of accepted filename extensions for accepting uploaded files. Multiple extensions can be separated by comma, such as txt,xml.

String

mapHttpMessageBody (consumer (advanced))

If this option is true then IN exchange Body of the exchange will be mapped to HTTP body. Setting this to false will avoid the HTTP mapping.

true

boolean

mapHttpMessageFormUrlEncodedBody (consumer (advanced))

If this option is true then IN exchange Form Encoded body of the exchange will be mapped to HTTP. Setting this to false will avoid the HTTP Form Encoded body mapping.

true

boolean

mapHttpMessageHeaders (consumer (advanced))

If this option is true then IN exchange Headers of the exchange will be mapped to HTTP headers. Setting this to false will avoid the HTTP Headers mapping.

true

boolean

optionsEnabled (consumer (advanced))

Specifies whether to enable HTTP OPTIONS for this Servlet consumer. By default OPTIONS is turned off.

boolean

traceEnabled (consumer (advanced))

Specifies whether to enable HTTP TRACE for this Servlet consumer. By default TRACE is turned off.

boolean

bridgeEndpoint (producer)

If the option is true, HttpProducer will ignore the Exchange.HTTP_URI header, and use the endpoint’s URI for request. You may also set the option throwExceptionOnFailure to be false to let the HttpProducer send all the fault response back.

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

Reading and Writing Data over Websocket

An atmopshere-websocket endpoint can either write data to the socket or read from the socket, depending on whether the endpoint is configured as the producer or the consumer, respectively.

Examples

Consumer Example

In the route below, Camel will read from the specified websocket connection.

from("atmosphere-websocket:///servicepath")
        .to("direct:next");

And the equivalent Spring sample:

<camelContext xmlns="http://camel.apache.org/schema/spring">
  <route>
    <from uri="atmosphere-websocket:///servicepath"/>
    <to uri="direct:next"/>
  </route>
</camelContext>

Producer Example

In the route below, Camel will write to the specified websocket connection.

from("direct:next")
        .to("atmosphere-websocket:///servicepath");

And the equivalent Spring sample:

<camelContext xmlns="http://camel.apache.org/schema/spring">
  <route>
    <from uri="direct:next"/>
    <to uri="atmosphere-websocket:///servicepath"/>
  </route>
</camelContext>

Spring Boot Auto-Configuration

When using atmosphere-websocket with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-atmosphere-websocket-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 12 options, which are listed below.

Name Description Default Type

camel.component.atmosphere-websocket.allow-java-serialized-object

Whether to allow java serialization when a request uses context-type=application/x-java-serialized-object. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.

false

Boolean

camel.component.atmosphere-websocket.attachment-multipart-binding

Whether to automatic bind multipart/form-data as attachments on the Camel Exchange. The options attachmentMultipartBinding=true and disableStreamCache=false cannot work together. Remove disableStreamCache to use AttachmentMultipartBinding. This is turn off by default as this may require servlet specific configuration to enable this when using Servlet’s.

false

Boolean

camel.component.atmosphere-websocket.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.atmosphere-websocket.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.atmosphere-websocket.enabled

Whether to enable auto configuration of the atmosphere-websocket component. This is enabled by default.

Boolean

camel.component.atmosphere-websocket.file-name-ext-whitelist

Whitelist of accepted filename extensions for accepting uploaded files. Multiple extensions can be separated by comma, such as txt,xml.

String

camel.component.atmosphere-websocket.header-filter-strategy

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message. The option is a org.apache.camel.spi.HeaderFilterStrategy type.

HeaderFilterStrategy

camel.component.atmosphere-websocket.http-binding

To use a custom HttpBinding to control the mapping between Camel message and HttpClient. The option is a org.apache.camel.http.common.HttpBinding type.

HttpBinding

camel.component.atmosphere-websocket.http-configuration

To use the shared HttpConfiguration as base configuration. The option is a org.apache.camel.http.common.HttpConfiguration type.

HttpConfiguration

camel.component.atmosphere-websocket.http-registry

To use a custom org.apache.camel.component.servlet.HttpRegistry. The option is a org.apache.camel.http.common.HttpRegistry type.

HttpRegistry

camel.component.atmosphere-websocket.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.atmosphere-websocket.servlet-name

Default name of servlet to use. The default name is CamelServlet.

CamelServlet

String