MVEL

Since Camel 2.12

Only producer is supported

The MVEL component allows you to process a message using an MVEL template. This can be ideal when using templating to generate responses for requests.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-mvel</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

mvel:templateName[?options]

Where templateName is the classpath-local URI of the template to invoke; or the complete URL of the remote template (eg: file://folder/myfile.mvel).

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The MVEL component supports 4 options, which are listed below.

Name Description Default Type

allowContextMapAll (producer)

Sets whether the context map should allow access to all details. By default only the message body and headers can be accessed. This option can be enabled for full access to the current Exchange and CamelContext. Doing so impose a potential security risk as this opens access to the full power of CamelContext API.

boolean

allowTemplateFromHeader (producer)

Whether to allow to use resource template from header or not (default false). Enabling this allows to specify dynamic templates via message header. However this can be seen as a potential security vulnerability if the header is coming from a malicious user, so use this with care.

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

Endpoint Options

The MVEL endpoint is configured using URI syntax:

mvel:resourceUri

with the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

resourceUri (producer)

Required Path to the resource. You can prefix with: classpath, file, http, ref, or bean. classpath, file and http loads the resource using these protocols (classpath is default). ref will lookup the resource in the registry. bean will call a method on a bean to be used as the resource. For bean you can specify the method name after dot, eg bean:myBean.myMethod.

String

Query Parameters (5 parameters)

Name Description Default Type

allowContextMapAll (producer)

Sets whether the context map should allow access to all details. By default only the message body and headers can be accessed. This option can be enabled for full access to the current Exchange and CamelContext. Doing so impose a potential security risk as this opens access to the full power of CamelContext API.

boolean

allowTemplateFromHeader (producer)

Whether to allow to use resource template from header or not (default false). Enabling this allows to specify dynamic templates via message header. However this can be seen as a potential security vulnerability if the header is coming from a malicious user, so use this with care.

boolean

contentCache (producer)

Sets whether to use resource content cache or not.

boolean

encoding (producer)

Character encoding of the resource content.

String

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

Message Headers

The MVEL component sets a couple headers on the message.

Header Description

CamelMvelResourceUri

The templateName as a String object.

MVEL Context

Camel will provide exchange information in the MVEL context (just a Map). The Exchange is transferred as:

key value

exchange

The Exchange itself

exchange.properties

The Exchange properties

headers

The headers of the message

camelContext

The CamelContext

request

The message

in

The message

body

The message body

out

The Out message (only for InOut message exchange pattern).

response

The Out message (only for InOut message exchange pattern).

Hot reloading

The mvel template resource is, by default, hot reloadable for both file and classpath resources (expanded jar). If you set contentCache=true, Camel will only load the resource once, and thus hot reloading is not possible. This scenario can be used in production, when the resource never changes.

Dynamic templates

Camel provides two headers by which you can define a different resource location for a template, or the template content itself. If any of these headers is set then Camel uses this over the endpoint configured resource. This allows you to provide a dynamic template at runtime.

Header Type Description

CamelMvelResourceUri

String

A URI for the template resource to use instead of the endpoint configured.

CamelMvelTemplate

String

The template to use instead of the endpoint configured.

Example

For example, you could use something like

from("activemq:My.Queue").
  to("mvel:com/acme/MyResponse.mvel");

To use a MVEL template to formulate a response to a message for InOut message exchanges (where there is a JMSReplyTo header).

To specify what template the component should use dynamically via a header, so for example:

from("direct:in").
  setHeader("CamelMvelResourceUri").constant("path/to/my/template.mvel").
  to("mvel:dummy?allowTemplateFromHeader=true");

To specify a template directly as a header the component should use dynamically via a header, so for example:

from("direct:in").
  setHeader("CamelMvelTemplate").constant("@{\"The result is \" + request.body * 3}\" }").
  to("velocity:dummy?allowTemplateFromHeader=true");

Spring Boot Auto-Configuration

When using mvel with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-mvel-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 7 options, which are listed below.

Name Description Default Type

camel.component.mvel.allow-context-map-all

Sets whether the context map should allow access to all details. By default only the message body and headers can be accessed. This option can be enabled for full access to the current Exchange and CamelContext. Doing so impose a potential security risk as this opens access to the full power of CamelContext API.

false

Boolean

camel.component.mvel.allow-template-from-header

Whether to allow to use resource template from header or not (default false). Enabling this allows to specify dynamic templates via message header. However this can be seen as a potential security vulnerability if the header is coming from a malicious user, so use this with care.

false

Boolean

camel.component.mvel.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.mvel.enabled

Whether to enable auto configuration of the mvel component. This is enabled by default.

Boolean

camel.component.mvel.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.language.mvel.enabled

Whether to enable auto configuration of the mvel language. This is enabled by default.

Boolean

camel.language.mvel.trim

Whether to trim the value to remove leading and trailing whitespaces and line breaks

true

Boolean