Azure CosmosDB

Since Camel 3.10

Both producer and consumer are supported

Azure Cosmos DB is Microsoft’s globally distributed, multi-model database service for operational and analytics workloads. It offers multi-mastering feature by automatically scaling throughput, compute, and storage. This component interacts with Azure CosmosDB through Azure SQL API.

Prerequisites

You must have a valid Windows Azure Storage account. More information is available at Azure Documentation Portal.

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-azure-cosmosdb</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI Format

azure-cosmosdb://[databaseName][/containerName][?options]

In case of the consumer, databaseName, containerName are required, In case of the producer, it depends on the operation that being requested, for example if operation is on a database level, e.b: deleteDatabase, only databaseName is required, but in case of operation being requested in container level, e.g: readItem, then databaseName and containerName are required.

You can append query options to the URI in the following format, ?options=value&option2=value&…​

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The Azure CosmosDB component supports 29 options, which are listed below.

Name Description Default Type

clientTelemetryEnabled (common)

Sets the flag to enable client telemetry which will periodically collect database operations aggregation statistics, system information like cpu/memory and send it to cosmos monitoring service, which will be helpful during debugging. DEFAULT value is false indicating this is opt in feature, by default no telemetry collection.

boolean

configuration (common)

The component configurations.

CosmosDbConfiguration

connectionSharingAcrossClientsEnabled (common)

Enables connections sharing across multiple Cosmos Clients. The default is false. When you have multiple instances of Cosmos Client in the same JVM interacting to multiple Cosmos accounts, enabling this allows connection sharing in Direct mode if possible between instances of Cosmos Client. Please note, when setting this option, the connection configuration (e.g., socket timeout config, idle timeout config) of the first instantiated client will be used for all other client instances.

boolean

consistencyLevel (common)

Sets the consistency levels supported for Azure Cosmos DB client operations in the Azure Cosmos DB service. The requested ConsistencyLevel must match or be weaker than that provisioned for the database account. Consistency levels by order of strength are STRONG, BOUNDED_STALENESS, SESSION and EVENTUAL. Refer to consistency level documentation for additional details: https://docs.microsoft.com/en-us/azure/cosmos-db/consistency-levels.

Enum values:

  • Strong

  • BoundedStaleness

  • Session

  • Eventual

  • ConsistentPrefix

SESSION

ConsistencyLevel

containerPartitionKeyPath (common)

Sets the container partition key path.

String

contentResponseOnWriteEnabled (common)

Sets the boolean to only return the headers and status code in Cosmos DB response in case of Create, Update and Delete operations on CosmosItem. In Consumer, it is enabled by default because of the ChangeFeed in the consumer that needs this flag to be enabled and thus is shouldn’t be overridden. In Producer, it advised to disable it since it reduces the network overhead.

true

boolean

cosmosAsyncClient (common)

Autowired Inject an external CosmosAsyncClient into the component which provides a client-side logical representation of the Azure Cosmos DB service. This asynchronous client is used to configure and execute requests against the service.

CosmosAsyncClient

createContainerIfNotExists (common)

Sets if the component should create Cosmos container automatically in case it doesn’t exist in Cosmos database.

boolean

createDatabaseIfNotExists (common)

Sets if the component should create Cosmos database automatically in case it doesn’t exist in Cosmos account.

boolean

databaseEndpoint (common)

Required Sets the Azure Cosmos database endpoint the component will connect to.

String

multipleWriteRegionsEnabled (common)

Sets the flag to enable writes on any regions for geo-replicated database accounts in the Azure Cosmos DB service. When the value of this property is true, the SDK will direct write operations to available writable regions of geo-replicated database account. Writable regions are ordered by PreferredRegions property. Setting the property value to true has no effect until EnableMultipleWriteRegions in DatabaseAccount is also set to true. DEFAULT value is true indicating that writes are directed to available writable regions of geo-replicated database account.

true

boolean

preferredRegions (common)

Sets the preferred regions for geo-replicated database accounts. For example, East US as the preferred region. When EnableEndpointDiscovery is true and PreferredRegions is non-empty, the SDK will prefer to use the regions in the container in the order they are specified to perform operations.

List

readRequestsFallbackEnabled (common)

Sets whether to allow for reads to go to multiple regions configured on an account of Azure Cosmos DB service. DEFAULT value is true. If this property is not set, the default is true for all Consistency Levels other than Bounded Staleness, The default is false for Bounded Staleness. 1. endpointDiscoveryEnabled is true 2. the Azure Cosmos DB account has more than one region.

true

boolean

throughputProperties (common)

Sets throughput of the resources in the Azure Cosmos DB service.

ThroughputProperties

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

boolean

changeFeedProcessorOptions (consumer)

Sets the ChangeFeedProcessorOptions to be used. Unless specifically set the default values that will be used are: maximum items per page or FeedResponse: 100 lease renew interval: 17 seconds lease acquire interval: 13 seconds lease expiration interval: 60 seconds feed poll delay: 5 seconds maximum scale count: unlimited.

ChangeFeedProcessorOptions

createLeaseContainerIfNotExists (consumer)

Sets if the component should create Cosmos lease container for the consumer automatically in case it doesn’t exist in Cosmos database.

boolean

createLeaseDatabaseIfNotExists (consumer)

Sets if the component should create Cosmos lease database for the consumer automatically in case it doesn’t exist in Cosmos account.

boolean

hostName (consumer)

Sets the hostname. The host: a host is an application instance that uses the change feed processor to listen for changes. Multiple instances with the same lease configuration can run in parallel, but each instance should have a different instance name. If not specified, this will be a generated random hostname.

String

leaseContainerName (consumer)

Sets the lease container which acts as a state storage and coordinates processing the change feed across multiple workers. The lease container can be stored in the same account as the monitored container or in a separate account. It will be auto created if createLeaseContainerIfNotExists is set to true.

camel-lease

String

leaseDatabaseName (consumer)

Sets the lease database where the leaseContainerName will be stored. If it is not specified, this component will store the lease container in the same database that is specified in databaseName. It will be auto created if createLeaseDatabaseIfNotExists is set to true.

String

itemId (producer)

Sets the itemId in case needed for operation on item like delete, replace.

String

itemPartitionKey (producer)

Sets partition key. Represents a partition key value in the Azure Cosmos DB database service. A partition key identifies the partition where the item is stored in.

PartitionKey

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

operation (producer)

The CosmosDB operation that can be used with this component on the producer.

Enum values:

  • listDatabases

  • createDatabase

  • queryDatabases

  • deleteDatabase

  • createContainer

  • replaceDatabaseThroughput

  • listContainers

  • queryContainers

  • deleteContainer

  • replaceContainerThroughput

  • createItem

  • upsertItem

  • deleteItem

  • replaceItem

  • readItem

  • readAllItems

  • queryItems

listDatabases

CosmosDbOperationsDefinition

query (producer)

An SQL query to execute on a given resources. To learn more about Cosmos SQL API, check this link \{link https://docs.microsoft.com/en-us/azure/cosmos-db/sql-query-getting-started}.

String

queryRequestOptions (producer)

Set additional QueryRequestOptions that can be used with queryItems, queryContainers, queryDatabases, listDatabases, listItems, listContainers operations.

CosmosQueryRequestOptions

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

accountKey (security)

Required Sets either a master or readonly key used to perform authentication for accessing resource.

String

Endpoint Options

The Azure CosmosDB endpoint is configured using URI syntax:

azure-cosmosdb:databaseName/containerName

with the following path and query parameters:

Path Parameters (2 parameters)

Name Description Default Type

databaseName (common)

The name of the Cosmos database that component should connect to. In case you are producing data and have createDatabaseIfNotExists=true, the component will automatically auto create a Cosmos database.

String

containerName (common)

The name of the Cosmos container that component should connect to. In case you are producing data and have createContainerIfNotExists=true, the component will automatically auto create a Cosmos container.

String

Query Parameters (29 parameters)

Name Description Default Type

clientTelemetryEnabled (common)

Sets the flag to enable client telemetry which will periodically collect database operations aggregation statistics, system information like cpu/memory and send it to cosmos monitoring service, which will be helpful during debugging. DEFAULT value is false indicating this is opt in feature, by default no telemetry collection.

boolean

connectionSharingAcrossClientsEnabled (common)

Enables connections sharing across multiple Cosmos Clients. The default is false. When you have multiple instances of Cosmos Client in the same JVM interacting to multiple Cosmos accounts, enabling this allows connection sharing in Direct mode if possible between instances of Cosmos Client. Please note, when setting this option, the connection configuration (e.g., socket timeout config, idle timeout config) of the first instantiated client will be used for all other client instances.

boolean

consistencyLevel (common)

Sets the consistency levels supported for Azure Cosmos DB client operations in the Azure Cosmos DB service. The requested ConsistencyLevel must match or be weaker than that provisioned for the database account. Consistency levels by order of strength are STRONG, BOUNDED_STALENESS, SESSION and EVENTUAL. Refer to consistency level documentation for additional details: https://docs.microsoft.com/en-us/azure/cosmos-db/consistency-levels.

Enum values:

  • Strong

  • BoundedStaleness

  • Session

  • Eventual

  • ConsistentPrefix

SESSION

ConsistencyLevel

containerPartitionKeyPath (common)

Sets the container partition key path.

String

contentResponseOnWriteEnabled (common)

Sets the boolean to only return the headers and status code in Cosmos DB response in case of Create, Update and Delete operations on CosmosItem. In Consumer, it is enabled by default because of the ChangeFeed in the consumer that needs this flag to be enabled and thus is shouldn’t be overridden. In Producer, it advised to disable it since it reduces the network overhead.

true

boolean

cosmosAsyncClient (common)

Autowired Inject an external CosmosAsyncClient into the component which provides a client-side logical representation of the Azure Cosmos DB service. This asynchronous client is used to configure and execute requests against the service.

CosmosAsyncClient

createContainerIfNotExists (common)

Sets if the component should create Cosmos container automatically in case it doesn’t exist in Cosmos database.

boolean

createDatabaseIfNotExists (common)

Sets if the component should create Cosmos database automatically in case it doesn’t exist in Cosmos account.

boolean

databaseEndpoint (common)

Required Sets the Azure Cosmos database endpoint the component will connect to.

String

multipleWriteRegionsEnabled (common)

Sets the flag to enable writes on any regions for geo-replicated database accounts in the Azure Cosmos DB service. When the value of this property is true, the SDK will direct write operations to available writable regions of geo-replicated database account. Writable regions are ordered by PreferredRegions property. Setting the property value to true has no effect until EnableMultipleWriteRegions in DatabaseAccount is also set to true. DEFAULT value is true indicating that writes are directed to available writable regions of geo-replicated database account.

true

boolean

preferredRegions (common)

Sets the preferred regions for geo-replicated database accounts. For example, East US as the preferred region. When EnableEndpointDiscovery is true and PreferredRegions is non-empty, the SDK will prefer to use the regions in the container in the order they are specified to perform operations.

List

readRequestsFallbackEnabled (common)

Sets whether to allow for reads to go to multiple regions configured on an account of Azure Cosmos DB service. DEFAULT value is true. If this property is not set, the default is true for all Consistency Levels other than Bounded Staleness, The default is false for Bounded Staleness. 1. endpointDiscoveryEnabled is true 2. the Azure Cosmos DB account has more than one region.

true

boolean

throughputProperties (common)

Sets throughput of the resources in the Azure Cosmos DB service.

ThroughputProperties

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

boolean

changeFeedProcessorOptions (consumer)

Sets the ChangeFeedProcessorOptions to be used. Unless specifically set the default values that will be used are: maximum items per page or FeedResponse: 100 lease renew interval: 17 seconds lease acquire interval: 13 seconds lease expiration interval: 60 seconds feed poll delay: 5 seconds maximum scale count: unlimited.

ChangeFeedProcessorOptions

createLeaseContainerIfNotExists (consumer)

Sets if the component should create Cosmos lease container for the consumer automatically in case it doesn’t exist in Cosmos database.

boolean

createLeaseDatabaseIfNotExists (consumer)

Sets if the component should create Cosmos lease database for the consumer automatically in case it doesn’t exist in Cosmos account.

boolean

hostName (consumer)

Sets the hostname. The host: a host is an application instance that uses the change feed processor to listen for changes. Multiple instances with the same lease configuration can run in parallel, but each instance should have a different instance name. If not specified, this will be a generated random hostname.

String

leaseContainerName (consumer)

Sets the lease container which acts as a state storage and coordinates processing the change feed across multiple workers. The lease container can be stored in the same account as the monitored container or in a separate account. It will be auto created if createLeaseContainerIfNotExists is set to true.

camel-lease

String

leaseDatabaseName (consumer)

Sets the lease database where the leaseContainerName will be stored. If it is not specified, this component will store the lease container in the same database that is specified in databaseName. It will be auto created if createLeaseDatabaseIfNotExists is set to true.

String

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

  • InOptionalOut

ExchangePattern

itemId (producer)

Sets the itemId in case needed for operation on item like delete, replace.

String

itemPartitionKey (producer)

Sets partition key. Represents a partition key value in the Azure Cosmos DB database service. A partition key identifies the partition where the item is stored in.

PartitionKey

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

operation (producer)

The CosmosDB operation that can be used with this component on the producer.

Enum values:

  • listDatabases

  • createDatabase

  • queryDatabases

  • deleteDatabase

  • createContainer

  • replaceDatabaseThroughput

  • listContainers

  • queryContainers

  • deleteContainer

  • replaceContainerThroughput

  • createItem

  • upsertItem

  • deleteItem

  • replaceItem

  • readItem

  • readAllItems

  • queryItems

listDatabases

CosmosDbOperationsDefinition

query (producer)

An SQL query to execute on a given resources. To learn more about Cosmos SQL API, check this link \{link https://docs.microsoft.com/en-us/azure/cosmos-db/sql-query-getting-started}.

String

queryRequestOptions (producer)

Set additional QueryRequestOptions that can be used with queryItems, queryContainers, queryDatabases, listDatabases, listItems, listContainers operations.

CosmosQueryRequestOptions

accountKey (security)

Required Sets either a master or readonly key used to perform authentication for accessing resource.

String

Authentication Information

To use this component, you have 2 options in order to provide the required Azure authentication information:

  • Provide accountKey and databaseEndpoint for your Azure CosmosDB account. The account key can be generated through your CosmosDB Azure portal.

  • Provide a CosmosAsyncClient instance which can be provided into cosmosAsyncClient.

Async Consumer and Producer

This component implements the async Consumer and producer.

This allows camel route to consume and produce events asynchronously without blocking any threads.

Usage

For example in order to consume records from a specific container in a specific database to a file, use the following snippet:

from("azure-cosmosdb://camelDb/myContainer?accountKey=MyaccountKey&databaseEndpoint=https//myazure.com:443&leaseDatabaseName=myLeaseDB&createLeaseDatabaseIfNotExists=true&createLeaseContainerIfNotExists=true").
to("file://directory");

Message headers evaluated by the component producer

Header Variable Name Type Description

CamelAzureCosmosDbDatabaseName

CosmosDbConstants.DATABASE_NAME

String

Overrides the database name which is the name of the Cosmos database that component should connect to. In case you are producing data and have createDatabaseIfNotExists=true, the component will automatically auto create a Cosmos database.

CamelAzureCosmosDbContainerName

CosmosDbConstants.CONTAINER_NAME

String

Overrides the container name which is the name of the Cosmos container that component should connect to. In case you are producing data and have createContainerIfNotExists=true, the component will automatically auto create a Cosmos container.

CamelAzureCosmosDbOperation

CosmosDbConstants.OPERATION

CosmosDbOperationsDefinition

Sets the producer operation which can be used to execute a specific operation on the producer.

CamelAzureCosmosDbQuery

CosmosDbConstants.QUERY

String

Sets the SQL query to execute on a given producer query operations.

CamelAzureCosmosDbQueryRequestOptions

CosmosDbConstants.QUERY_REQUEST_OPTIONS

CosmosQueryRequestOptions

Set additional QueryRequestOptions that can be used with queryItems, queryContainers, queryDatabases, listDatabases, listItems, listContainers operations.

CamelAzureCosmosDbCreateDatabaseIfNotExist

CosmosDbConstants.CREATE_DATABASE_IF_NOT_EXIST

boolean

Sets if the component should create Cosmos database automatically in case it doesn’t exist in Cosmos account.

CamelAzureCosmosDbCreateContainerIfNotExist

CosmosDbConstants.CREATE_CONTAINER_IF_NOT_EXIST

boolean

Sets if the component should create Cosmos container automatically in case it doesn’t exist in Cosmos account.

CamelAzureCosmosDbThroughputProperties

CosmosDbConstants.THROUGHPUT_PROPERTIES

ThroughputProperties

Sets throughput of the resources in the Azure Cosmos DB service.

CamelAzureCosmosDbDatabaseRequestOptions

CosmosDbConstants.DATABASE_REQUEST_OPTIONS

CosmosDatabaseRequestOptions

Sets additional options to execute on database operations.

CamelAzureCosmosDbContainerPartitionKeyPath

CosmosDbConstants.CONTAINER_PARTITION_KEY_PATH

String

Sets the container partition key path.

CamelAzureCosmosDbContainerRequestOptions

CosmosDbConstants.CONTAINER_REQUEST_OPTIONS

CosmosContainerRequestOptions

Sets additional options to execute on container operations.

CamelAzureCosmosDbItemPartitionKey

CosmosDbConstants.ITEM_PARTITION_KEY

PartitionKey

Sets partition key. Represents a partition key value in the Azure Cosmos DB database service. A partition key identifies the partition where the item is stored in.

CamelAzureCosmosDbItemRequestOptions

CosmosDbConstants.ITEM_REQUEST_OPTIONS

CosmosItemRequestOptions

Sets additional options to execute on item operations.

CamelAzureCosmosDbItemId

CosmosDbConstants.ITEM_ID

String

Sets the itemId in case needed for operation on item like delete, replace.

Message headers set by the component producer

Header Variable Name Type Description

CamelAzureCosmosDbRecourseId

CosmosDbConstants.RESOURCE_ID

String

The resource ID of the requested resource.

CamelAzureCosmosDbEtag

CosmosDbConstants.E_TAG

String

The Etag ID of the requested resource.

CamelAzureCosmosDbTimestamp

CosmosDbConstants.TIMESTAMP

String

The timestamp of the requested resource.

CamelAzureCosmosDbResponseHeaders

CosmosDbConstants.RESPONSE_HEADERS

Map

The response headers of the requested resource.

CamelAzureCosmosDbStatusCode

CosmosDbConstants.STATUS_CODE

Integer

The status code of the requested resource.

CamelAzureCosmosDbDefaultTimeToLiveInSeconds

CosmosDbConstants.DEFAULT_TIME_TO_LIVE_SECONDS

Integer

The TTL of the requested resource.

CamelAzureCosmosDbManualThroughput

CosmosDbConstants.MANUAL_THROUGHPUT

Integer

The manual throughput of the requested resource.

CamelAzureCosmosDbAutoscaleMaxThroughput

CosmosDbConstants.AUTOSCALE_MAX_THROUGHPUT

Integer

The AutoscaleMaxThroughput of the requested resource.

Azure CosmosDB Producer operations

Camel Azure CosmosDB component provides wide range of operations on the producer side:

Operations on the service level

For these operations, databaseName is required except for queryDatabases and listDatabases operations.

Operation Description

listDatabases

Gets a list of all databases as List<CosmosDatabaseProperties> set in the exchange message body.

createDatabase

Creates a database in the specified Azure CosmosDB account.

queryDatabases

query is required Execute an SQL query against the service level in order for example return only a small subset of the databases list. It will set List<CosmosDatabaseProperties> set in the exchange message body.

Operations on the database level

For these operations, databaseName is required for all operations here and containerName only for createContainer and queryContainers.

Operation Description

deleteDatabase

Deletes a database from the Azure CosmosDB account.

createContainer

Creates a container in the specified Azure CosmosDB database.

replaceDatabaseThroughput

Replaces the throughput for the specified Azure CosmosDB database.

listContainers

Gets a list of all containers in the specified database as List<CosmosContainerProperties> set in the exchange message body.

queryContainers

query is required Executes an SQL query against the database level in order for example return only a small subset of the containers list for the specified database. It will set List<CosmosContainerProperties> set in the exchange message body.

Operations on the container level

For these operations, databaseName and containerName is required for all operations here.

Operation Description

deleteContainer

Deletes a container from the specified Azure CosmosDB database.

replaceContainerThroughput

Replaces the throughput for the specified Azure CosmosDB container.

createItem

itemPartitionKey is required Creates an item in the specified container, it accepts POJO or key value as Map<String, ?>.

upsertItem

itemPartitionKey is required Creates an item in the specified container if it doesn’t exist otherwise overwrite it if it exists, it accepts POJO or key value as Map<String, ?>.

replaceItem

itemPartitionKey and itemId are required Overwrites an item in the specified container , it accepts POJO or key value as Map<String, ?>.

deleteItem

itemPartitionKey and itemId are required Deletes an item in the specified container.

readItem

itemPartitionKey and itemId are required Gets an item in the specified container as Map<String,?> set in the exchange body message.

readItem

itemPartitionKey Gets a list of items in the specified container per the itemPartitionKey as List<Map<String,?>> set in the exchange body message.

queryItems

query is required Execute an SQL query against the container level in order for example return only matching items per the SQL query. It will set List<Map<String,>?> in the exchange message body.

Refer to the example section in this page to learn how to use these operations into your camel application.

Examples

  • listDatabases:

from("direct:start")
  .to("azure-cosmosdb://?operation=listDatabases")
  .to("mock:result");

  • createDatabase:

from("direct:start")
    .process(exchange -> {
        exchange.getIn().setHeader(CosmosDbConstants.DATABASE_NAME, "myDb");
      })
  .to("azure-cosmosdb://?operation=createDatabase")
  .to("mock:result");

  • deleteDatabase:

from("direct:start")
    .process(exchange -> {
        exchange.getIn().setHeader(CosmosDbConstants.DATABASE_NAME, "myDb");
      })
  .to("azure-cosmosdb://?operation=deleteDatabase")
  .to("mock:result");

  • createContainer:

from("direct:start")
    .process(exchange -> {
        exchange.getIn().setHeader(CosmosDbConstants.DATABASE_NAME, "databaseName");
        exchange.getIn().setHeader(CosmosDbConstants.CONTAINER_NAME, "containerName");
        exchange.getIn().setHeader(CosmosDbConstants.CONTAINER_PARTITION_KEY_PATH, "path");
        exchange.getIn().setHeader(CosmosDbConstants.CREATE_DATABASE_IF_NOT_EXIST, true);
      })
  .to("azure-cosmosdb://?operation=createContainer")
  .to("mock:result");

  • deleteContainer:

from("direct:start")
    .process(exchange -> {
        exchange.getIn().setHeader(CosmosDbConstants.DATABASE_NAME, "databaseName");
        exchange.getIn().setHeader(CosmosDbConstants.CONTAINER_NAME, "containerName");
      })
  .to("azure-cosmosdb://?operation=deleteContainer")
  .to("mock:result");

  • replaceDatabaseThroughput:

from("direct:start")
    .process(exchange -> {
        exchange.getIn().setHeader(CosmosDbConstants.DATABASE_NAME, "databaseName");
         exchange.getIn().setHeader(CosmosDbConstants.THROUGHPUT_PROPERTIES,
                    ThroughputProperties.createManualThroughput(700));
      })
  .to("azure-cosmosdb://?operation=replaceDatabaseThroughput")
  .to("mock:result");

  • queryContainers:

from("direct:start")
    .process(exchange -> {
        exchange.getIn().setHeader(CosmosDbConstants.DATABASE_NAME, "databaseName");
            exchange.getIn().setHeader(CosmosDbConstants.QUERY, "SELECT * from c where c.id = 'myAwersomeContainer'");
      })
  .to("azure-cosmosdb://?operation=queryContainers")
  .to("mock:result");

  • createItem:

from("direct:start")
    .process(exchange -> {
            // create item to send
            final Map<String, Object> item = new HashMap<>();
            item1.put("id", "test-id-1");
            item1.put("partition", "test-1");
            item1.put("field1", "awesome!");

            exchange.getIn().setHeader(CosmosDbConstants.DATABASE_NAME, "databaseName");
            exchange.getIn().setHeader(CosmosDbConstants.CONTAINER_NAME, "containerName");
            exchange.getIn().setHeader(CosmosDbConstants.CONTAINER_PARTITION_KEY_PATH, "partition");
            exchange.getIn().setHeader(CosmosDbConstants.ITEM_PARTITION_KEY, "test-1");
            exchange.getIn().setBody(item);
      })
  .to("azure-cosmosdb://?operation=createItem")
  .to("mock:result");

  • replaceItem:

from("direct:start")
    .process(exchange -> {
            // create item to send
            final Map<String, Object> item = new HashMap<>();
            item1.put("id", "test-id-1");
            item1.put("partition", "test-1");
            item1.put("field1", "awesome!");

            exchange.getIn().setHeader(CosmosDbConstants.DATABASE_NAME, "databaseName");
            exchange.getIn().setHeader(CosmosDbConstants.CONTAINER_NAME, "containerName");
            exchange.getIn().setHeader(CosmosDbConstants.ITEM_PARTITION_KEY, "test-1");
            exchange.getIn().setHeader(CosmosDbConstants.ITEM_ID, "test-id-1");
            exchange.getIn().setBody(item);
      })
  .to("azure-cosmosdb://?operation=replaceItem")
  .to("mock:result");

  • deleteItem:

from("direct:start")
    .process(exchange -> {
            exchange.getIn().setHeader(CosmosDbConstants.DATABASE_NAME, "databaseName");
            exchange.getIn().setHeader(CosmosDbConstants.CONTAINER_NAME, "containerName");
            exchange.getIn().setHeader(CosmosDbConstants.ITEM_PARTITION_KEY, "test-1");
            exchange.getIn().setHeader(CosmosDbConstants.ITEM_ID, "test-id-1");
            exchange.getIn().setBody(item);
      })
  .to("azure-cosmosdb://?operation=deleteItem")
  .to("mock:result");

  • queryItems:

from("direct:start")
    .process(exchange -> {
            exchange.getIn().setHeader(CosmosDbConstants.DATABASE_NAME, "databaseName");
            exchange.getIn().setHeader(CosmosDbConstants.CONTAINER_NAME, "containerName");
            exchange.getIn().setHeader(CosmosDbConstants.QUERY, "SELECT c.id,c.field2,c.field1 from c where c.id = 'test-id-1'");
      })
  .to("azure-cosmosdb://?operation=queryItems")
  .to("mock:result");

Azure CosmosDB Consumer

Camel Azure CosmosDB uses ChangeFeed pattern to capture a feed of events and feed them into the Camel in an Async manner, something similar to Change Data Capture (CDC) design pattern. However, it doesn’t capture deletes as these are removed from the feed as well.

To use the Camel Azure CosmosDB, containerName and databaseName are required. However, there are more options that need to be set in order to use this feature:

  • leaseDatabaseName : Sets the lease database where the leaseContainerName will be stored. If it is not specified, this component will store the lease container in the same database that is specified in databaseName. It will be auto created if createLeaseDatabaseIfNotExists is set to true.

  • leaseContainerName : Sets the lease container which acts as a state storage and coordinates processing the change feed across multiple workers. The lease container can be stored in the same account as the monitored container or in a separate account. It will be auto created if createLeaseContainerIfNotExists is set to true. If not specified, this component will create container called camel-lease.

  • hostName : Sets the hostname. The host: a host is an application instance that uses the change feed processor to listen for changes. Multiple instances with the same lease configuration can run in parallel, but each instance should have a different instance name. If not specified, this will be a generated random hostname.

  • changeFeedProcessorOptions : Sets additional options for the change feed processor.

The consumer will set List<Map<String,>> in exchange message body which reflect list of items in a single feed.

Example:

For example to listen to the events in myContainer container in myDb:

from("azure-cosmosdb://myDb/myContainer?leaseDatabaseName=myLeaseDb&createLeaseDatabaseIfNotExists=true&createLeaseContainerIfNotExists=true")
  .to("mock:result");

Development Notes (Important)

When developing on this component, you will need to obtain your Azure accessKey in order to run the integration tests. In addition to the mocked unit tests you will need to run the integration tests with every change you make or even client upgrade as the Azure client can break things even on minor versions upgrade. To run the integration tests, on this component directory, run the following maven command:

mvn clean install -Dendpoint={{dbaddress}} -DaccessKey={{accessKey}}

Whereby endpoint is your Azure CosmosDB endpoint name and accessKey is the access key being generated from Azure CosmosDB portal.

Spring Boot Auto-Configuration

When using azure-cosmosdb with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-azure-cosmosdb-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 30 options, which are listed below.

Name Description Default Type

camel.component.azure-cosmosdb.account-key

Sets either a master or readonly key used to perform authentication for accessing resource.

String

camel.component.azure-cosmosdb.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.azure-cosmosdb.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.azure-cosmosdb.change-feed-processor-options

Sets the ChangeFeedProcessorOptions to be used. Unless specifically set the default values that will be used are: maximum items per page or FeedResponse: 100 lease renew interval: 17 seconds lease acquire interval: 13 seconds lease expiration interval: 60 seconds feed poll delay: 5 seconds maximum scale count: unlimited. The option is a com.azure.cosmos.models.ChangeFeedProcessorOptions type.

ChangeFeedProcessorOptions

camel.component.azure-cosmosdb.client-telemetry-enabled

Sets the flag to enable client telemetry which will periodically collect database operations aggregation statistics, system information like cpu/memory and send it to cosmos monitoring service, which will be helpful during debugging. DEFAULT value is false indicating this is opt in feature, by default no telemetry collection.

false

Boolean

camel.component.azure-cosmosdb.configuration

The component configurations. The option is a org.apache.camel.component.azure.cosmosdb.CosmosDbConfiguration type.

CosmosDbConfiguration

camel.component.azure-cosmosdb.connection-sharing-across-clients-enabled

Enables connections sharing across multiple Cosmos Clients. The default is false. When you have multiple instances of Cosmos Client in the same JVM interacting to multiple Cosmos accounts, enabling this allows connection sharing in Direct mode if possible between instances of Cosmos Client. Please note, when setting this option, the connection configuration (e.g., socket timeout config, idle timeout config) of the first instantiated client will be used for all other client instances.

false

Boolean

camel.component.azure-cosmosdb.consistency-level

Sets the consistency levels supported for Azure Cosmos DB client operations in the Azure Cosmos DB service. The requested ConsistencyLevel must match or be weaker than that provisioned for the database account. Consistency levels by order of strength are STRONG, BOUNDED_STALENESS, SESSION and EVENTUAL. Refer to consistency level documentation for additional details: https://docs.microsoft.com/en-us/azure/cosmos-db/consistency-levels

ConsistencyLevel

camel.component.azure-cosmosdb.container-partition-key-path

Sets the container partition key path.

String

camel.component.azure-cosmosdb.content-response-on-write-enabled

Sets the boolean to only return the headers and status code in Cosmos DB response in case of Create, Update and Delete operations on CosmosItem. In Consumer, it is enabled by default because of the ChangeFeed in the consumer that needs this flag to be enabled and thus is shouldn’t be overridden. In Producer, it advised to disable it since it reduces the network overhead

true

Boolean

camel.component.azure-cosmosdb.cosmos-async-client

Inject an external CosmosAsyncClient into the component which provides a client-side logical representation of the Azure Cosmos DB service. This asynchronous client is used to configure and execute requests against the service. The option is a com.azure.cosmos.CosmosAsyncClient type.

CosmosAsyncClient

camel.component.azure-cosmosdb.create-container-if-not-exists

Sets if the component should create Cosmos container automatically in case it doesn’t exist in Cosmos database

false

Boolean

camel.component.azure-cosmosdb.create-database-if-not-exists

Sets if the component should create Cosmos database automatically in case it doesn’t exist in Cosmos account

false

Boolean

camel.component.azure-cosmosdb.create-lease-container-if-not-exists

Sets if the component should create Cosmos lease container for the consumer automatically in case it doesn’t exist in Cosmos database

false

Boolean

camel.component.azure-cosmosdb.create-lease-database-if-not-exists

Sets if the component should create Cosmos lease database for the consumer automatically in case it doesn’t exist in Cosmos account

false

Boolean

camel.component.azure-cosmosdb.database-endpoint

Sets the Azure Cosmos database endpoint the component will connect to.

String

camel.component.azure-cosmosdb.enabled

Whether to enable auto configuration of the azure-cosmosdb component. This is enabled by default.

Boolean

camel.component.azure-cosmosdb.host-name

Sets the hostname. The host: a host is an application instance that uses the change feed processor to listen for changes. Multiple instances with the same lease configuration can run in parallel, but each instance should have a different instance name. If not specified, this will be a generated random hostname.

String

camel.component.azure-cosmosdb.item-id

Sets the itemId in case needed for operation on item like delete, replace

String

camel.component.azure-cosmosdb.item-partition-key

Sets partition key. Represents a partition key value in the Azure Cosmos DB database service. A partition key identifies the partition where the item is stored in. The option is a com.azure.cosmos.models.PartitionKey type.

PartitionKey

camel.component.azure-cosmosdb.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.azure-cosmosdb.lease-container-name

Sets the lease container which acts as a state storage and coordinates processing the change feed across multiple workers. The lease container can be stored in the same account as the monitored container or in a separate account. It will be auto created if createLeaseContainerIfNotExists is set to true.

camel-lease

String

camel.component.azure-cosmosdb.lease-database-name

Sets the lease database where the leaseContainerName will be stored. If it is not specified, this component will store the lease container in the same database that is specified in databaseName. It will be auto created if createLeaseDatabaseIfNotExists is set to true.

String

camel.component.azure-cosmosdb.multiple-write-regions-enabled

Sets the flag to enable writes on any regions for geo-replicated database accounts in the Azure Cosmos DB service. When the value of this property is true, the SDK will direct write operations to available writable regions of geo-replicated database account. Writable regions are ordered by PreferredRegions property. Setting the property value to true has no effect until EnableMultipleWriteRegions in DatabaseAccount is also set to true. DEFAULT value is true indicating that writes are directed to available writable regions of geo-replicated database account.

true

Boolean

camel.component.azure-cosmosdb.operation

The CosmosDB operation that can be used with this component on the producer.

CosmosDbOperationsDefinition

camel.component.azure-cosmosdb.preferred-regions

Sets the preferred regions for geo-replicated database accounts. For example, East US as the preferred region. When EnableEndpointDiscovery is true and PreferredRegions is non-empty, the SDK will prefer to use the regions in the container in the order they are specified to perform operations.

List

camel.component.azure-cosmosdb.query

An SQL query to execute on a given resources. To learn more about Cosmos SQL API, check this link {link https://docs.microsoft.com/en-us/azure/cosmos-db/sql-query-getting-started}

String

camel.component.azure-cosmosdb.query-request-options

Set additional QueryRequestOptions that can be used with queryItems, queryContainers, queryDatabases, listDatabases, listItems, listContainers operations. The option is a com.azure.cosmos.models.CosmosQueryRequestOptions type.

CosmosQueryRequestOptions

camel.component.azure-cosmosdb.read-requests-fallback-enabled

Sets whether to allow for reads to go to multiple regions configured on an account of Azure Cosmos DB service. DEFAULT value is true. If this property is not set, the default is true for all Consistency Levels other than Bounded Staleness, The default is false for Bounded Staleness. 1. endpointDiscoveryEnabled is true 2. the Azure Cosmos DB account has more than one region

true

Boolean

camel.component.azure-cosmosdb.throughput-properties

Sets throughput of the resources in the Azure Cosmos DB service. The option is a com.azure.cosmos.models.ThroughputProperties type.

ThroughputProperties
Back to top