Apache Camel helps you integrate over 300 different systems!

URI format

grpc://service[?options]

Configuring Options

Camel components are configured on two separate levels:

component level
endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The gRPC component supports 3 options, which are listed below.

Name	Description	Default	Type
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.		boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.		boolean
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean

Name

Description

Default

Type

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

Endpoint Options

The gRPC endpoint is configured using URI syntax:

grpc:host:port/service

with the following path and query parameters:

Path Parameters (3 parameters)

Name	Description	Type
host (common)	Required The gRPC server host name. This is localhost or 0.0.0.0 when being a consumer or remote server host name when using producer.	String
port (common)	Required The gRPC local or remote server port.	int
service (common)	Required Fully qualified service name from the protocol buffer descriptor file (package dot service definition name).	String

Name

Description

Default

Type

host (common)

Required The gRPC server host name. This is localhost or 0.0.0.0 when being a consumer or remote server host name when using producer.

String

port (common)

Required The gRPC local or remote server port.

int

service (common)

Required Fully qualified service name from the protocol buffer descriptor file (package dot service definition name).

String

Query Parameters (28 parameters)

Name	Description	Default	Type
autoDiscoverClientInterceptors (common)	Setting the autoDiscoverClientInterceptors mechanism, if true, the component will look for a ClientInterceptor instance in the registry automatically otherwise it will skip that checking.	true	boolean
flowControlWindow (common)	The HTTP/2 flow control window size (MiB).	1048576	int
maxMessageSize (common)	The maximum message size allowed to be received/sent (MiB).	4194304	int
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.		boolean
consumerStrategy (consumer)	This option specifies the top-level strategy for processing service requests and responses in streaming mode. If an aggregation strategy is selected, all requests will be accumulated in the list, then transferred to the flow, and the accumulated responses will be sent to the sender. If a propagation strategy is selected, request is sent to the stream, and the response will be immediately sent back to the sender. Enum values: AGGREGATION PROPAGATION	PROPAGATION	GrpcConsumerStrategy
forwardOnCompleted (consumer)	Determines if onCompleted events should be pushed to the Camel route.		boolean
forwardOnError (consumer)	Determines if onError events should be pushed to the Camel route. Exceptions will be set as message body.		boolean
maxConcurrentCallsPerConnection (consumer)	The maximum number of concurrent calls permitted for each incoming server connection.	2147483647	int
routeControlledStreamObserver (consumer)	Lets the route to take control over stream observer. If this value is set to true, then the response observer of gRPC call will be set with the name GrpcConstants.GRPC_RESPONSE_OBSERVER in the Exchange object. Please note that the stream observer’s onNext(), onError(), onCompleted() methods should be called in the route.		boolean
exceptionHandler (consumer (advanced))	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer (advanced))	Sets the exchange pattern when the consumer creates an exchange. Enum values: InOnly InOut InOptionalOut		ExchangePattern
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.		boolean
method (producer)	gRPC method name.		String
producerStrategy (producer)	The mode used to communicate with a remote gRPC server. In SIMPLE mode a single exchange is translated into a remote procedure call. In STREAMING mode all exchanges will be sent within the same request (input and output of the recipient gRPC service must be of type 'stream'). Enum values: SIMPLE STREAMING	SIMPLE	GrpcProducerStrategy
streamRepliesTo (producer)	When using STREAMING client mode, it indicates the endpoint where responses should be forwarded.		String
userAgent (producer)	The user agent header passed to the server.		String
synchronous (advanced)	Sets whether synchronous processing should be strictly used.		boolean
authenticationType (security)	Authentication method type in advance to the SSL/TLS negotiation. Enum values: NONE GOOGLE JWT	NONE	GrpcAuthType
jwtAlgorithm (security)	JSON Web Token sign algorithm. Enum values: HMAC256 HMAC384 HMAC512	HMAC256	JwtAlgorithm
jwtIssuer (security)	JSON Web Token issuer.		String
jwtSecret (security)	JSON Web Token secret.		String
jwtSubject (security)	JSON Web Token subject.		String
keyCertChainResource (security)	The X.509 certificate chain file resource in PEM format link.		String
keyPassword (security)	The PKCS#8 private key file password.		String
keyResource (security)	The PKCS#8 private key file resource in PEM format link.		String
negotiationType (security)	Identifies the security negotiation type used for HTTP/2 communication. Enum values: TLS PLAINTEXT_UPGRADE PLAINTEXT	PLAINTEXT	NegotiationType
serviceAccountResource (security)	Service Account key file in JSON format resource link supported by the Google Cloud SDK.		String
trustCertCollectionResource (security)	The trusted certificates collection file resource in PEM format for verifying the remote endpoint’s certificate.		String

Name

Description

Default

Type

autoDiscoverClientInterceptors (common)

Setting the autoDiscoverClientInterceptors mechanism, if true, the component will look for a ClientInterceptor instance in the registry automatically otherwise it will skip that checking.

true

boolean

flowControlWindow (common)

The HTTP/2 flow control window size (MiB).

1048576

int

maxMessageSize (common)

The maximum message size allowed to be received/sent (MiB).

4194304

int

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

boolean

consumerStrategy (consumer)

This option specifies the top-level strategy for processing service requests and responses in streaming mode. If an aggregation strategy is selected, all requests will be accumulated in the list, then transferred to the flow, and the accumulated responses will be sent to the sender. If a propagation strategy is selected, request is sent to the stream, and the response will be immediately sent back to the sender.

Enum values:

AGGREGATION
PROPAGATION

PROPAGATION

GrpcConsumerStrategy

forwardOnCompleted (consumer)

Determines if onCompleted events should be pushed to the Camel route.

boolean

forwardOnError (consumer)

Determines if onError events should be pushed to the Camel route. Exceptions will be set as message body.

boolean

maxConcurrentCallsPerConnection (consumer)

The maximum number of concurrent calls permitted for each incoming server connection.

2147483647

int

routeControlledStreamObserver (consumer)

Lets the route to take control over stream observer. If this value is set to true, then the response observer of gRPC call will be set with the name GrpcConstants.GRPC_RESPONSE_OBSERVER in the Exchange object. Please note that the stream observer’s onNext(), onError(), onCompleted() methods should be called in the route.

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

InOnly
InOut
InOptionalOut

ExchangePattern

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

method (producer)

gRPC method name.

String

producerStrategy (producer)

The mode used to communicate with a remote gRPC server. In SIMPLE mode a single exchange is translated into a remote procedure call. In STREAMING mode all exchanges will be sent within the same request (input and output of the recipient gRPC service must be of type 'stream').

Enum values:

SIMPLE
STREAMING

SIMPLE

GrpcProducerStrategy

streamRepliesTo (producer)

When using STREAMING client mode, it indicates the endpoint where responses should be forwarded.

String

userAgent (producer)

The user agent header passed to the server.

String

synchronous (advanced)

Sets whether synchronous processing should be strictly used.

boolean

authenticationType (security)

Authentication method type in advance to the SSL/TLS negotiation.

Enum values:

NONE
GOOGLE
JWT

NONE

GrpcAuthType

jwtAlgorithm (security)

JSON Web Token sign algorithm.

Enum values:

HMAC256
HMAC384
HMAC512

HMAC256

JwtAlgorithm

jwtIssuer (security)

JSON Web Token issuer.

String

jwtSecret (security)

JSON Web Token secret.

String

jwtSubject (security)

JSON Web Token subject.

String

keyCertChainResource (security)

The X.509 certificate chain file resource in PEM format link.

String

keyPassword (security)

The PKCS#8 private key file password.

String

keyResource (security)

The PKCS#8 private key file resource in PEM format link.

String

negotiationType (security)

Identifies the security negotiation type used for HTTP/2 communication.

Enum values:

TLS
PLAINTEXT_UPGRADE
PLAINTEXT

PLAINTEXT

NegotiationType

serviceAccountResource (security)

Service Account key file in JSON format resource link supported by the Google Cloud SDK.

String

trustCertCollectionResource (security)

The trusted certificates collection file resource in PEM format for verifying the remote endpoint’s certificate.

String

Transport security and authentication support

The following authentication mechanisms are built-in to gRPC and available in this component:

SSL/TLS: gRPC has SSL/TLS integration and promotes the use of SSL/TLS to authenticate the server, and to encrypt all the data exchanged between the client and the server. Optional mechanisms are available for clients to provide certificates for mutual authentication.
Token-based authentication with Google: gRPC provides a generic mechanism to attach metadata based credentials to requests and responses. Additional support for acquiring access tokens while accessing Google APIs through gRPC is provided. In general this mechanism must be used as well as SSL/TLS on the channel.

To enable these features the following component properties combinations must be configured:

Num.	Option	Parameter	Value	Required/Optional
1	SSL/TLS	negotiationType	TLS	Required
		keyCertChainResource		Required
		keyResource		Required
		keyPassword		Optional
		trustCertCollectionResource		Optional
2	Token-based authentication with Google API	authenticationType	GOOGLE	Required
		negotiationType	TLS	Required
		serviceAccountResource		Required
3	Custom JSON Web Token implementation authentication	authenticationType	JWT	Required
		negotiationType	NONE or TLS	Optional. The TLS/SSL not checking for this type, but strongly recommended.
		jwtAlgorithm	HMAC256(default) or (HMAC384,HMAC512)	Optional
		jwtSecret		Required
		jwtIssuer		Optional
		jwtSubject		Optional

Num.

Option

Parameter

Value

Required/Optional

1

SSL/TLS

negotiationType

TLS

Required

keyCertChainResource

Required

keyResource

Required

keyPassword

Optional

trustCertCollectionResource

Optional

2

Token-based authentication with Google API

authenticationType

GOOGLE

Required

negotiationType

TLS

Required

serviceAccountResource

Required

3

Custom JSON Web Token implementation authentication

authenticationType

JWT

Required

negotiationType

NONE or TLS

Optional. The TLS/SSL not checking for this type, but strongly recommended.

jwtAlgorithm

HMAC256(default) or (HMAC384,HMAC512)

Optional

jwtSecret

Required

jwtIssuer

Optional

jwtSubject

Optional

TLS with OpenSSL is currently the recommended approach for using gRPC over TLS component. Using the JDK for ALPN is generally much slower and may not support the necessary ciphers for HTTP2. This function is not implemented in the component.

There might be a need to install additional libraries according to the Operating System of choice. For more information consult the Security page of gRPC.

gRPC producer resource type mapping

The table below shows the types of objects in the message body, depending on the types (simple or stream) of incoming and outgoing parameters, as well as the invocation style (synchronous or asynchronous). Please note, that invocation of the procedures with incoming stream parameter in asynchronous style are not allowed.

Invocation style	Request type	Response type	Request Body Type	Result Body Type
synchronous	simple	simple	Object	Object
synchronous	simple	stream	Object	List<Object>
synchronous	stream	simple	not allowed	not allowed
synchronous	stream	stream	not allowed	not allowed
asynchronous	simple	simple	Object	List<Object>
asynchronous	simple	stream	Object	List<Object>
asynchronous	stream	simple	Object or List<Object>	List<Object>
asynchronous	stream	stream	Object or List<Object>	List<Object>

Invocation style

Request type

Response type

Request Body Type

Result Body Type

synchronous

simple

Object

synchronous

simple

stream

Object

List<Object>

synchronous

stream

simple

not allowed

synchronous

stream

not allowed

asynchronous

simple

Object

List<Object>

asynchronous

simple

stream

Object

List<Object>

asynchronous

stream

simple

Object or List<Object>

List<Object>

asynchronous

stream

Object or List<Object>

List<Object>

gRPC consumer headers (will be installed after the consumer invocation)

Header name	Description	Possible values
CamelGrpcMethodName	Method name handled by the consumer service
CamelGrpcEventType	Received event type from the sent request	onNext, onCompleted or onError
CamelGrpcUserAgent	If provided, the given agent will prepend the gRPC library’s user agent information

Header name

Description

Possible values

CamelGrpcMethodName

Method name handled by the consumer service

CamelGrpcEventType

Received event type from the sent request

onNext, onCompleted or onError

CamelGrpcUserAgent

If provided, the given agent will prepend the gRPC library’s user agent information

Examples

Below is a simple synchronous method invoke with host and port parameters

from("direct:grpc-sync")
.to("grpc://remotehost:1101/org.apache.camel.component.grpc.PingPong?method=sendPing&synchronous=true");

<route>
    <from uri="direct:grpc-sync" />
    <to uri="grpc://remotehost:1101/org.apache.camel.component.grpc.PingPong?method=sendPing&synchronous=true"/>
</route>

An asynchronous method invoke

from("direct:grpc-async")
.to("grpc://remotehost:1101/org.apache.camel.component.grpc.PingPong?method=pingAsyncResponse");

gRPC service consumer with propagation consumer strategy

from("grpc://localhost:1101/org.apache.camel.component.grpc.PingPong?consumerStrategy=PROPAGATION")
.to("direct:grpc-service");

gRPC service producer with streaming producer strategy (requires a service that uses "stream" mode as input and output)

from("direct:grpc-request-stream")
.to("grpc://remotehost:1101/org.apache.camel.component.grpc.PingPong?method=PingAsyncAsync&producerStrategy=STREAMING&streamRepliesTo=direct:grpc-response-stream");

from("direct:grpc-response-stream")
.log("Response received: ${body}");

gRPC service consumer TLS/SLL security negotiation enable

from("grpc://localhost:1101/org.apache.camel.component.grpc.PingPong?consumerStrategy=PROPAGATION&negotiationType=TLS&keyCertChainResource=file:src/test/resources/certs/server.pem&keyResource=file:src/test/resources/certs/server.key&trustCertCollectionResource=file:src/test/resources/certs/ca.pem")
.to("direct:tls-enable")

gRPC service producer with custom JSON Web Token implementation authentication

from("direct:grpc-jwt")
.to("grpc://localhost:1101/org.apache.camel.component.grpc.PingPong?method=pingSyncSync&synchronous=true&authenticationType=JWT&jwtSecret=supersecuredsecret");

Configuration

It’s it is recommended to use Maven Protocol Buffers Plugin which calls Protocol Buffer Compiler (protoc) tool to generate Java source files from .proto (protocol buffer definition) files for the custom project. This plugin will generate procedures request and response classes, their builders and gRPC procedures stubs classes as well.

Following steps are required:

Insert operating system and CPU architecture detection extension inside <build> tag of the project pom.xml or set ${os.detected.classifier} parameter manually

<extensions>
  <extension>
    <groupId>kr.motd.maven</groupId>
    <artifactId>os-maven-plugin</artifactId>
    <version>1.4.1.Final</version>
  </extension>
</extensions>

Insert gRPC and protobuf Java code generator plugin <plugins> tag of the project pom.xml

<plugin>
  <groupId>org.xolstice.maven.plugins</groupId>
  <artifactId>protobuf-maven-plugin</artifactId>
  <version>0.5.0</version>
  <configuration>
    <protocArtifact>com.google.protobuf:protoc:${protobuf-version}:exe:${os.detected.classifier}</protocArtifact>
    <pluginId>grpc-java</pluginId>
    <pluginArtifact>io.grpc:protoc-gen-grpc-java:${grpc-version}:exe:${os.detected.classifier}</pluginArtifact>
  </configuration>
  <executions>
    <execution>
      <goals>
        <goal>compile</goal>
        <goal>compile-custom</goal>
        <goal>test-compile</goal>
        <goal>test-compile-custom</goal>
      </goals>
    </execution>
  </executions>
</plugin>

More information

See these resources:

Spring Boot Auto-Configuration

When using grpc with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-grpc-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 4 options, which are listed below.

Name	Description	Default	Type
camel.component.grpc.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.grpc.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.grpc.enabled	Whether to enable auto configuration of the grpc component. This is enabled by default.		Boolean
camel.component.grpc.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean

Name

Description

Default

Type

camel.component.grpc.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.grpc.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.grpc.enabled

Whether to enable auto configuration of the grpc component. This is enabled by default.

Boolean

camel.component.grpc.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean