Ignite Compute
Since Camel 2.17
Only producer is supported
The Ignite Compute endpoint is one of camel-ignite endpoints which allows you to run compute operations on the cluster by passing in an IgniteCallable, an IgniteRunnable, an IgniteClosure, or collections of them, along with their parameters if necessary.
The host part of the endpoint URI is a symbolic endpoint ID, it is not used for any purposes.
The endpoint tries to run the object passed in the body of the IN message as the compute job. It expects different payload types depending on the execution type.
Configuring Options
Camel components are configured on two separate levels:
-
component level
-
endpoint level
Configuring Component Options
The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.
Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.
Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.
Configuring Endpoint Options
Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.
Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.
A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.
The following two sections lists all the options, firstly for the component followed by the endpoint.
Component Options
The Ignite Compute component supports 5 options, which are listed below.
| Name | Description | Default | Type |
|---|---|---|---|
configurationResource (producer) |
The resource from where to load the configuration. It can be a: URL, String or InputStream type. |
Object |
|
ignite (producer) |
To use an existing Ignite instance. |
Ignite |
|
igniteConfiguration (producer) |
Allows the user to set a programmatic ignite configuration. |
IgniteConfiguration |
|
lazyStartProducer (producer) |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
boolean |
|
autowiredEnabled (advanced) |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
boolean |
Endpoint Options
The Ignite Compute endpoint is configured using URI syntax:
ignite-compute:endpointId
with the following path and query parameters:
Path Parameters (1 parameters)
| Name | Description | Default | Type |
|---|---|---|---|
endpointId (producer) |
Required The endpoint ID (not used). |
String |
Query Parameters (8 parameters)
| Name | Description | Default | Type |
|---|---|---|---|
clusterGroupExpression (producer) |
An expression that returns the Cluster Group for the IgniteCompute instance. |
ClusterGroupExpression |
|
computeName (producer) |
The name of the compute job, which will be set via IgniteCompute#withName(String). |
String |
|
executionType (producer) |
Required The compute operation to perform. Possible values: CALL, BROADCAST, APPLY, EXECUTE, RUN, AFFINITY_CALL, AFFINITY_RUN. The component expects different payload types depending on the operation. Enum values:
|
IgniteComputeExecutionType |
|
lazyStartProducer (producer) |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
boolean |
|
propagateIncomingBodyIfNoReturnValue (producer) |
Sets whether to propagate the incoming body if the return type of the underlying Ignite operation is void. |
true |
boolean |
taskName (producer) |
The task name, only applicable if using the IgniteComputeExecutionType#EXECUTE execution type. |
String |
|
timeoutMillis (producer) |
The timeout interval for triggered jobs, in milliseconds, which will be set via IgniteCompute#withTimeout(long). |
Long |
|
treatCollectionsAsCacheObjects (producer) |
Sets whether to treat Collections as cache objects or as Collections of items to insert/update/compute, etc. |
boolean |
Expected payload types
Each operation expects the indicated types:
| Operation | Expected payloads |
|---|---|
CALL |
Collection of IgniteCallable, or a single IgniteCallable. |
BROADCAST |
IgniteCallable, IgniteRunnable, IgniteClosure. |
APPLY |
IgniteClosure. |
EXECUTE |
ComputeTask, Class<? extends ComputeTask> or an object representing parameters if the taskName option is not null. |
RUN |
A Collection of IgniteRunnables, or a single IgniteRunnable. |
AFFINITY_CALL |
IgniteCallable. |
AFFINITY_RUN |
IgniteRunnable. |
Headers used
This endpoint uses the following headers:
| Header name | Constant | Expected type | Description |
|---|---|---|---|
CamelIgniteComputeExecutionType |
IgniteConstants.IGNITE_COMPUTE_EXECUTION_TYPE |
IgniteComputeExecutionType enum |
Allows you to dynamically change the compute operation to perform. |
CamelIgniteComputeParameters |
IgniteConstants.IGNITE_COMPUTE_PARAMS |
Any object or Collection of objects. |
Parameters for APPLY, BROADCAST and EXECUTE operations. |
CamelIgniteComputeReducer |
IgniteConstants.IGNITE_COMPUTE_REDUCER |
IgniteReducer |
Reducer for the APPLY and CALL operations. |
CamelIgniteComputeAffinityCacheName |
IgniteConstants.IGNITE_COMPUTE_AFFINITY_CACHE_NAME |
String |
Affinity cache name for the AFFINITY_CALL and AFFINITY_RUN operations. |
CamelIgniteComputeAffinityKey |
IgniteConstants.IGNITE_COMPUTE_AFFINITY_KEY |
Object |
Affinity key for the AFFINITY_CALL and AFFINITY_RUN operations. |
Spring Boot Auto-Configuration
When using ignite with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:
<dependency>
<groupId>org.apache.camel.springboot</groupId>
<artifactId>camel-ignite-starter</artifactId>
<version>x.x.x</version>
<!-- use the same version as your Camel core version -->
</dependency>The component supports 44 options, which are listed below.
| Name | Description | Default | Type |
|---|---|---|---|
camel.component.ignite-cache.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.ignite-cache.bridge-error-handler |
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
camel.component.ignite-cache.configuration-resource |
The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type. |
Object |
|
camel.component.ignite-cache.enabled |
Whether to enable auto configuration of the ignite-cache component. This is enabled by default. |
Boolean |
|
camel.component.ignite-cache.ignite |
To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type. |
Ignite |
|
camel.component.ignite-cache.ignite-configuration |
Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type. |
IgniteConfiguration |
|
camel.component.ignite-cache.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.ignite-compute.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.ignite-compute.configuration-resource |
The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type. |
Object |
|
camel.component.ignite-compute.enabled |
Whether to enable auto configuration of the ignite-compute component. This is enabled by default. |
Boolean |
|
camel.component.ignite-compute.ignite |
To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type. |
Ignite |
|
camel.component.ignite-compute.ignite-configuration |
Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type. |
IgniteConfiguration |
|
camel.component.ignite-compute.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.ignite-events.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.ignite-events.bridge-error-handler |
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
camel.component.ignite-events.configuration-resource |
The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type. |
Object |
|
camel.component.ignite-events.enabled |
Whether to enable auto configuration of the ignite-events component. This is enabled by default. |
Boolean |
|
camel.component.ignite-events.ignite |
To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type. |
Ignite |
|
camel.component.ignite-events.ignite-configuration |
Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type. |
IgniteConfiguration |
|
camel.component.ignite-idgen.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.ignite-idgen.configuration-resource |
The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type. |
Object |
|
camel.component.ignite-idgen.enabled |
Whether to enable auto configuration of the ignite-idgen component. This is enabled by default. |
Boolean |
|
camel.component.ignite-idgen.ignite |
To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type. |
Ignite |
|
camel.component.ignite-idgen.ignite-configuration |
Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type. |
IgniteConfiguration |
|
camel.component.ignite-idgen.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.ignite-messaging.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.ignite-messaging.bridge-error-handler |
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
camel.component.ignite-messaging.configuration-resource |
The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type. |
Object |
|
camel.component.ignite-messaging.enabled |
Whether to enable auto configuration of the ignite-messaging component. This is enabled by default. |
Boolean |
|
camel.component.ignite-messaging.ignite |
To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type. |
Ignite |
|
camel.component.ignite-messaging.ignite-configuration |
Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type. |
IgniteConfiguration |
|
camel.component.ignite-messaging.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.ignite-queue.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.ignite-queue.configuration-resource |
The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type. |
Object |
|
camel.component.ignite-queue.enabled |
Whether to enable auto configuration of the ignite-queue component. This is enabled by default. |
Boolean |
|
camel.component.ignite-queue.ignite |
To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type. |
Ignite |
|
camel.component.ignite-queue.ignite-configuration |
Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type. |
IgniteConfiguration |
|
camel.component.ignite-queue.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
camel.component.ignite-set.autowired-enabled |
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
camel.component.ignite-set.configuration-resource |
The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type. |
Object |
|
camel.component.ignite-set.enabled |
Whether to enable auto configuration of the ignite-set component. This is enabled by default. |
Boolean |
|
camel.component.ignite-set.ignite |
To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type. |
Ignite |
|
camel.component.ignite-set.ignite-configuration |
Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type. |
IgniteConfiguration |
|
camel.component.ignite-set.lazy-start-producer |
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |